Specifications

128
11. Press Setup.
12. Press Setup.
2.
Mustek DVD-V100
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and
so on, or VER 255 for multi-region playback.
8. Press Setup.
Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback:
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow keys on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so
on, or VER 255 for multi-region playback.
8. Using the Arrow keys, go to Parental Controls. the code to VER 3001 to enable parental controls, or VER 3000 to
disable these controls.
9. Using the Arrow keys, go to Macrovision and change the code to VER 4001 to enable Macrovision, or VER 4000
to disable this feature.
10. Using the Arrow keys, go to VCD/SVCD and change the code to VER 5001 to disable VCD/SVCD playback, or
VER 5000 to enable this feature.
11. Press Setup.
12. Press Setup.
Mustek DVD-V300
Converting this player to Multi-Region (newer firmware):
1. Empty Tray.
2. Press Setup on Remote.
3. Press Next.
4. Press Prev.
5. Press Next.
6. Press Prev.
7. On Right Upper Corner will be written Ver#.
8. Press Left or Right to get to number 255 (which is for region free - these version numbers correspond to region
number).
9. Turn Off and On.
Converting this player to Multi-Region (older firmware):
1. Ensure the players tray is empty and closed.
2. On the Remote control Press Setup.
3. Then On the Players Front Panel.
4. Press Next.
5. Press Stop.
6. Press Pause/Step.