Specifications

124
1. Press 7, 7 and Select on the Remote control.
2. You Should now be in a secret menu.
3. Change the Country Code to 13 for Multi-Region, which is auto switching even on Hard Coded DVD discs
4. To disable Macrovision change the 0 to a 1.
Celo-80
Converting the player to Multi-Region (older firmware):
1. Press 2, 9, 1 and 8 on the remote.
2. Press Enter.
3. You Should now be in a secret menu.
4. Change the Country Code to 13 for Multi-Region.
Classica-20
Converting the player to Multi-Region (newer firmware - V1.3):
This player should be region free out of the box. If it is not:
1. Press 2, 8, 1 and 2 on the remote.
2. Press Enter.
3. You Should now be in a secret menu.
4. Change the Country Code to 13 for Multi-Region.
Converting the player to Multi-Region (older firmware):
1. Press 2, 9, 1 and 8 on the remote.
2. Press Enter.
3. You Should now be in a secret menu.
4. Change the Country Code to 13 for Multi-Region.
Micromedia Premium
NOTE: Please note that this conversion may only work a maximum of 25 times
! After this time the machine may end
up locked on the last region!
Region 1:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
No known problems, other than the possible change limit of 25 times.
Micromega Premium