Specifications

12
Alba DVD-106
1. Power on player.
2. Press Pause on the Remote.
3. Press 3, 1, 4, 1, 5 and 9.
4. The player display should read "COdE - -".
5. Enter the desired Region (0 = all, 1 = Region 1, 2 = Region 2 etc.).
6. Press Pause again.
7. Power off player.
8. Wait 10 seconds and then power on again.
Alba DVD-108
This player should be region free straight from the box!
If it is NOT region free, try this:
1. Press PAL/NTSC.
2. Press Menu.
3. Press 0.
Allowing VCD Playback:
1. Open the tray.
2. Press 2, 8, 1, 2.
3. Press Enter.
4. A secret menu should appear.
5. Push in the tray with VCD on board.
6. Wait a second and the stop icon appears on top left of screen.
7. Press 1 and VCD will play.
8. Beware: UK retailer Argos are selling the Alba 108xi which looks similar, but alias, is not multi-region out of the
box.
Alba DVD-108XI
1. Power on the DVD and open the tray.
2. Press Setup from the remote.
2. Scroll along using the right area key until you highlight CUSTOM SETUP.
4. DO NOT press enter!
5. Press 3333, you are now taken to secret menu 1.
6. Highlight the region codes and select 0 for all regions.
7. You have to highlight the region menu so it goes yellow, and then move about with the arrow keys.
Enabling VCD Playback:
1. Insert the disc and close the tray, wait for it to load and the LCD to display STOP.
2. Press Program, 1, ENTER then press PLAY.
3. VCD will now load and play, tried and tested a number of times, perfect each time...
No known problems with Multi Region setup.
Few bugs, Multi-program VCDs may not always work without a menu. After the first episode ended the second did
not follow, however, easy to get round; say you want to play episode 3 on the disc, you would key in the same
commands, but replace the number 1, with the corresponding episode number, eg want to play episode 3, key
PROGRAM, 3, ENTER , PLAY.
You might get round that if you burn a VCD menu...