Specifications

119
5. Immediately press Right Arrow (once).
6. You should see VERSION on the on screen display.
7. Select this option and change to 0 for region free.
Mascom DVD-MC450
1. Open the player's tray.
2. Press Right Arrow.
3. Press Left Arrow.
4. Press Down Arrow.
5. Press Up Arrow.
6. Press Display.
7. Choose 0 for region free (or choose desired region).
There are also a few other numbers that can enable/disable certain options. They are described below:
#7 CVBS and RGB (not sure what it's for)
#8 VCD and No VCD
#9 Mute ON and Mute OFF (for DVD-TV only)
8. Press Enter to finish.
NB: Don't press default setup. This will change them all back to factory default setup.
Converting this player to Multi-Region if the above does not work:
1. Power on the player.
2. Eject the DVD tray.
3. Press Setup (this is important and different then the other setups)
4. Press Right, Left, Down, Up, Display (arrow keys) you have to press it quickly enough.
5. You'll see a bar (on top) where "ALL" is highlighted.
6. Press 8 to enable VCD support (that includes SVCD) you will see a notification : "VCD SUPPORT ENABLED"
Matsui DVD-110
Press 9 on the Remote
Press Open/Close on the Remote, the tray should not open though
Press 5 on the Remote
Press Mute on the Remote, this should bring up the Region Selection page
Press OK then Exit
The word ALL should appear and you will be able to play discs from any Region
Matsui DVD-120
Perform ALL functions on the players front panel, NOT from the Remote Control
Turn the machine on
Press STOP, SKIP and OPEN at the same time and hold for a few seconds
A Menu will appear. Select the region you want and play your disc
Matsui DVD-122 - 125
Power on the DVD player and ensure there is no disc in the drive
Press Menu
Then press 1, 6, 7 and press Mute for ALL Regions. Press Exit
Matsui DVD-225
Power on the player.
Open the disc tray.
Press 3, 4, 9, 7, 3, 4 on the remote.
Press 0 (for region free).