Specifications

118
Marantz DV-7000
NOTE: Please note that this conversion may only work a maximum of 15 times
! After this time the machine may end
up locked on the last region!
1. Turn on the player with no disc in the tray.
2. Press Next and Previous (on front panel) at the same time.
3. The display shows Region 2.
4. Press Stop (on front panel) for 5 seconds.
5. The display now shows Region 0.
6. Press Play.
7. The display should show Region 0 OK.
8. Turn power off and on.
No known problems, other than the change limit of 15 times.
Marantz DVD-890
NOTE: Please note that this conversion may only work a maximum of 25 times
! After this time the machine may end
up locked on the last region!
Region 1:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Converting the player back to Region 2 mode (factory defaults):
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
NOTE: If this turns your player onscreen display on a Philips machine to that of the Grundig, refer above to reset
your machine back to its original factory settings.
No known problems, other than the change limit of 25 times.
Mark TFE-200
To access this players secret menu follow these steps:
Turn the machine on and ensure that there is no disk in the tray
Press Setup
Press Stop
Press Preview
Press Next
You should now be able to access the hidden menu and thereby change Region.
Marquant DVD-333K
1. Turn the machine on and ensure that there is no disc in the tray.
2. Press Setup on the remote.
3. Press 3, 6, and 9.
4. Immediately press Left Arrow 3 times.