Specifications

116
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
No known problems, other than the change limit of 15 times.
Marantz DV-4200FN
NOTE: Please note that this conversion may only work a maximum of 15 times
! After this time the machine may end
up locked on the last region!
1. Turn player on with no disk in the tray.
2. Wait for "No Disk" to appear on font panel display.
3. Press Pause.
4. Press 3, 1, 4, 1, 5 and 9.
5. The word COdE is displayed on the front panel.
6. Key in the number of the Region you want to use, or 0 for Multi-Region.
7. Press Pause.
To Enable (S)VCD Playback:
1. Press Break on your remote control
2. Press 1.
3. Press 4.
4. Press 7.
5. Press 2.
6. Press Enter.
7. Using Up, highlight the 4 DE option on the display
8. Press Program.
9. Press 4.
10. Press Program.
11. Press 5.
12. Press Enter.
13. Press Return.
14. Power off your player
15. Power on your player
To Enable (S)VCD Playback if the above does not work:
Use the remote control for all button presses:
1. Press Pause, 1, 4, 7, 2, 5, 5
2. Press Enter, Up, 5, 3
3. Press Enter, Up, 0, 3
4. Press Enter, Up, Program, 4, Program, 5
5. Press Enter, Up, 1, 2
6. Press Enter, Up, 5, 5
7. Press Enter, Up, 1, 0
8. Press Enter, Up, 0, 0, Enter
9. Power off the player, then power it back on.
No known problems, other than the change limit of 15 times.
Marantz DV-4300
To Check your current region setting:
1. Open the player's tray.
2. Press Setup.
3. Press Shuffle.
4. Press Pause/Step.