Specifications

113
To fix low sound output volumes when connecting to your TV via SCART (newer firmware):
1. Press Setup.
2. Press Stop.
3. Press Step.
4. Press Angle.
5. The word RFOUT will appear on screen briefly and the sound will now have been adjusted to normal levels
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the
current region status is displayed.
Converting this player to Multi-Region (older firmware):
1. Press Setup on the Remote Control.
2. Press Title.
3. Press Step.
4. Press Next.
5. Using the Up and Down buttons on the Remote, select the Region of your choice or Bypass for Region free
6. Save and then Exit the menu.
NB: If any of these codes don't work then you may wish to consider using the code for Logix DVD-3000D.
Maplin SMC-330S
1. Press Open on your remote control to open the tray.
2. Press 7 on your remote control.
3. Press Enter on your remote control.
4. Press 7 again on your remote control.
5. Select region 13 for region free, (or any region you choose).
NB: Also disable Macrovision from this menu.
Converting to Multi-Region if the above does not work:
1. Press Open on the Remote Control.
2. Press 2, 0, 0 and 1.
3. The player should now be in Multi-Region mode.
Alternate method for Multi-Region:
1. Open player tray
2. Press 7, Select/Enter, Select/Enter on the remote control.
3. You should now be in the hidden menu.
4. Change the region to the desired number.
Maplin SMC-MK1
1. Press Open on your remote control to open the tray.
2. Press 7 on your remote control.
3. Press Enter on your remote control.
4. Press 7 again on your remote control.
5. Select region 13 for region free, (or any region you choose).
NB: Also disable Macrovision from this menu.
Converting to Multi-Region if the above does not work:
1. Press Open on the Remote Control.
2. Press 2, 0, 0 and 1.
3. The player should now be in Multi-Region mode.
Alternate method for Multi-Region:
1. Open player tray