Specifications

112
Converting the player to Multi-Region (newer firmware):
1. Press Open on the Remote.
2. Press Setup.
3. Press 9 button on the Remote for Region Free, or 1 for Region 1, 2 for Region 2, and so on
4. Press buttons 2, 0, 0 and 0.
5. Press Step.
6. Press Shuffle.
7. Press Next.
To check the current region setting of this player on later firmware versions, press the following button in order from
the Remote Control:
1. Press Open.
2. Press Setup.
3. Press Shuffle.
4. Press Step.
5. Press Next.
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears. This is where
the current region status is displayed.
Converting the player to Multi-Region (older firmware):
1. Open the drive tray.
2. Press Setup on your remote control.
3. From the Setup Menu go to Custom Setup option.
4. Press the buttons 3, 3, 3 and 3 on your remote control in order, one at a time.
5. You should now be in a hidden menu where you may change the region to 1 for region 1, 2 for region 2, and so on.
Manhattan DVD-300
1. Switch on the player.
2. Press Open.
3. Press Setup.
4. Press 9 for region free or 1 for region 1, 2 for 2 region 2 etc.
5. Press 3, 0, 1 and 0.
6. Press Step.
7. Press Shuffle.
8. Press Next.
Manhattan DVD-2000
To convert this player to Multi-Region (newer firmware):
1. Press Open on your Remote Control.
2. Press Setup.
3. Press 9 button for Region Free, or 1 for Region 1, 2 for Region 2, and so on
4. Press 2, 0, 1 and then 0 on your Remote, or if this doesn't work, try pressing the buttons 3, 0, 1 and then 0
5. Press Step.
6. Press Shuffle.
7. Press Next.
To check the current region setting of this player (newer firmware):
1. Press the Open button on the Remote Control.
2. Press Setup.
3. Press Shuffle.
4. Press Step.
5. Press Next.
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the
current region status is displayed.