Specifications

111
Converting this player to Multi-Region (older firmware):
1. Press DVD on your remote control.
2. Press Open/Close.
3. Place a Region 1 disc in the tray (or any different region).
4. Press Open/Close.
5. Wait until the player ejects the disc, displaying an error message and leaving the tray open.
6. Remove the Region 1 disc from the tray.
7. Press Open/Close.
8. Wait until the display shows the words 'NO DISC'.
9. Press Time Search.
10. Press 1, 1, and 9 in order, one at a time.
11. Press Open/Close.
12. Place a Region 1 disc in the tray.
13. Press Open/Close.
M
Magnavox MDV-435
1. Power the player on.
2. Press Open/Close to open the player's tray.
3. Press 1, 1, 1, 1 on the remote.
4. Press 0 for region free.
Note: press the keys slowly in step 3 to stop the tray closing/opening.
Disable Macrovision:
1. Turn the player on.
2. Press Menu on the remote control.
3. Go to Default and select Reset.
4. Do this every time the player is switched to re-disable.
Magnavox MDV-450
1. Power the player on.
2. Press Open/Close to open the player's tray.
3. Press 1, 1, 1, 1 on the remote.
4. Press 0 for region free.
Note: press the keys slowly in step 3 to stop the tray closing/opening.
Disable Macrovision:
1. Turn the player on.
2. Press Menu on the remote control.
3. Go to Default and select Reset.
4. Do this every time the player is switched to re-disable.
Magnex DVP-900
1. Press Open on the players front panel.
2. Press 7, 7, Enter on the remote.
3. You are now in the hidden setup page.
4. You can change the region number or use 13 for region free.
5. You can also turn Macrovision off.
Malaga SE1210