Specifications

110
1) Power on the Logix-3300D DVD Player
2) Press the OPEN/CLOSE button on the remote once
3) Press the SETUP Button
4) Press the blue right arrow button 4 times to
CUSTOM SETUP menu
5) Press 3 Button 4 times
6) Press the blue right arrow button once
7) Move up and down to select your desired region code,
CODE 0 represents Auto-Region
8) Press ENTER button when you have selected
9) Press SETUP button to save settings
Luma 929K
1. Press Setup on your remote control.
2. Press Last.
3. Press Skip Previous.
4. Press Skip Next.
5. You should now be in a hidden menu where you can change the Region code of this player.
Lumatron DVD-20K1
Press Setup
Press Stop
Press Skip Back (|<<)
Press Skip Forward (>>|)
You are now taken to the hidden Region + misc. setup menu
Lumatron DVD-51K3
Open the CD drawer.
Press Setup on the remote.
Press Right Arrow to get to the 'preferences' screen.
Press 1, 3, 7 and 9 to get to region setup.
Use 'arrow up' to change the region code (0=All).
Lumatron DVD-320
Open the DVD Tray.
Press Setup.
Choose 'Custom Setup'.
Press 3, 3, 3, 3 on the remote.
Now you should be in a secret menu where you can choose a desired region or region free
Luxman DVD-100
Converting this player to Multi-Region (newer firmware):
1. Press DVD on your remote control.
2. Press Open/Close.
3. Place a Region 1 disc in the tray (or any different region).
4. Press Open/Close.
5. Wait until the player ejects the disc, displaying an error message and leaving the tray open.
6. Remove the Region 1 disc from the tray.
7. Press Open/Close.
8. Wait until the display shows the words 'NO DISC'.
9. Press TV.
10. Press 2, 0, and 0 in order, one at a time.
11. Press Open/Close.
12. Place a Region 1 disc in the tray.
13. Press Open/Close.