Specifications

109
Logix DVD-3000
To convert this player to Multi-Region (newer firmware):
1. Press Open on your Remote Control.
2. Press Setup.
3. Press 9 button for Region Free, or 1 for Region 1, 2 for Region 2, and so on
4. Press 2, 0, 1 and then 0 on your Remote, or if this doesn't work, try pressing the buttons 3, 0, 1 and then 0
5. Press Step.
6. Press Shuffle.
7. Press Next.
To check the current region setting of this player (newer firmware):
1. Press the Open button on the Remote Control.
2. Press Setup.
3. Press Shuffle.
4. Press Step.
5. Press Next.
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the
current region status is displayed.
To fix low sound output volumes when connecting to your TV via SCART (newer firmware):
1. Press Setup.
2. Press Stop.
3. Press Step.
4. Press Angle.
5. The word RFOUT will appear on screen briefly and the sound will now have been adjusted to normal levels
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the
current region status is displayed.
Converting this player to Multi-Region (older firmware):
1. Press Setup on the Remote Control.
2. Press Title.
3. Press Step.
4. Press Next.
5. Using the Up and Down buttons on the Remote, select the Region of your choice or Bypass for Region free
6. Save and then Exit the menu.
NB: If any of these codes don't work then you may wish to consider using the code for Logix DVD-3000D listed
below.
Logix DVD-3000D
1. Power on the player.
2. Open the players tray and leave it open
3. Enter the Setup Menu
4. Select Custom (the last option on the Setup Menu)
5. Press 3 four (4) times.
6. Select your code choice (Press 0 for Multi-Region)
7. Press Enter
8. Press Setup
9. When the play all region options has been selected the player still appears to handle RCE titles such as Crouching
Tiger, Hidden Dragon.
Logix DVD-3300D