Specifications
108
4. Press Left three times, in succession.
5. Press Right.
6. You should now be in a setup menu.
7. Select the Version option from the menu, then select the Region option.
8. You can now change the region to 1 for region 1, 2 for region 2, and so on, or 0 for multi-region playback.
9. You can also disable Macrovision and enable VCD playback from this menu.
Limit DVP-3000b
1. Power on the player.
2. Press Open/Close.
3. Press 8, 4, 2 and 1 on the remote.
4. The current Region will be displayed.
5. Press 'OK' repeatedly until Region code shows 9, for region free.
6. Press Open/Close button again to complete the change.
Limit JDV300
1. Press Standby on the remote control to turn player off.
2. Press Standby on the remote control to turn the player on.
3. Open the drive tray.
4. Press 8, 9, 2 and 6 on the remote control.
5. Press one of the following buttons on the remote control:
6. 1 to 6 for the specific region.
7. 9 for region free.
8. 7 for MP3 mode.
9. 8 for VCD mode.
10. Insert the disc and close the drive tray.
Limit JDV300A
1. Press Standby on the remote control to turn player off.
2. Press Standby on the remote control to turn the player on.
3. Open the drive tray.
4. Press 8, 9, 2 and 6 on the remote control.
5. Press one of the following buttons on the remote control:
6. 1 to 6 for the specific region.
7. 9 for region free.
8. 7 for MP3 mode.
9. 8 for VCD mode.
10. Insert the disc and close the drive tray.
LiteOn LVD-2001
1. Press Ppen/Close.
2. Press 2, 9, 6 and 0 on the remote.
3. Now you are in a special menu of this DVD player.
4. Take the cursor to "0" for code-free.
5. You can take the cursor to "Macrovision: Yes/No".
6. When you are ready, press: Open/Close or Enter to finish.
Loewe Xemix
Turn the machine ON and remove any discs
When the display shows 'NO DISC'
Enter 'Play', '159'
The display will change to show 11 dashes ('-----------')
For region 1 enter the 12 digit code '005000128156',
for region 2 enter the 12 digit code '002000128156'
Press 'Play' and the screen will turn red and then reset