Specifications

6. Press Enter from the remote.

7. Turn Off the unit using the On/Off switch, not Standby.

8. The next time you turn on the unit, the region should be set.

Whilst most movies will play with the region set to 0, some Region 1 titles require you to select that zone before they

will play.

Akai DV-P4500

1. Connect the machine to the mains but do not power on, also ensure there is no disc inserted.

2. Press and hold down both the Dimmer and Reverse Skip buttons on the front panel and then press the Power ON

3. The display should show "NAKAMICHI"

4. Hold the Dimmer & Reverse Skip buttons for a few seconds and the Display should change to "___ ___ ___ ___"

from "NAKAMICHI". Wait for a minimum of 5 seconds (at this stage you're not pushing the Dimmer & Reverse Skip

buttons any longer).

5. Press 1, 9, 9, 9.

6. The display should now show: A-00 D-??, Where D-?? indicates the present region

7. To change the region code, enter in the new code (i.e. 01 for Region 1, 03 for Region 3, etc.).

8. Press Enter (located next to the numbers keypad on the remote).

9. The display should now change (slowly) to D-01 (or whichever new region you have assigned to, as above).

10. Completely Power Off and the machine is set to the new Region.

The setup is also indefinite and has no limited lifespan, and can therefore be performed as many times as required.

Whilst most movies will play with the region set to 0, some Region 1 titles require you to select that zone before they

will play.

Akai DVPS-760

1. Open the disc tray.

2. Press Setup on the remote control.

3. Press 9, 1, 0, 1, 0 one at a time, and in order

4. Press Step

5. Shuffle

6. Next

After pushing the sequence, check the DEBUG menu to see if the setting has been changed to 9. Here's the sequence

for accessing the DEBUG menu:

1. Open the disc tray.

2. Press Setup on the remote.

3. Press Shuffle.

4. Press STEP >|<

4. PressNEXT >>|

3) Scroll down to DEBUG and verify that it says '9'.

NB: THE DEBUG MENU DOES NOT ALLOW YOU TO CHANGE THE REGION SETTING. IT ONLY LETS

YOU CHECK THE REGION SETTING.

Akura ADPV150T-S

NB: Press these keys of remote:

1. Press Open, Setup, Arrow Right, Arrow Left, Arrow Down, Arrow Up, Display.