MULTI REGION DVD CODES Disclaimer All the information supplied has been collected from various sources. Author can not be held responsible for any damage caused to your DVD player. A A-Trend AD-L528 1. 2. 3. 4. 5. 6. Make sure there is no disc in the player's tray. Press Pause, 3, 1, 4, 1, 5, and 9 on the remote. The word CODE will appear in the DVD player's window. Enter the desired region number. Press Pause. Turn the player off then on again. A-Trend Helios Converting the player to Multi-Region: 1.
Press 'Set-up' on the remote Then press 'Next, Prev, Next, Prev.' Enter region code set-up: Ver 255 = Region free Ver 1 = Region 1 Ver 2 = Region 2 Press left (<) or right (>) key Press Down key twice Ver 4001 = macrovision enable Ver 4000 = macrovision disable Press left (<) or right (>) key.
Turn on the DVD Player and open the Tray Press Setup on the Remote Control and enter the setup menu Inside the setup menu, press in sequence, the following buttons: ZOOM, PREV, NEXT. Then on the top of the screen you will see "XX1XX" With the arrows on the Remote control, press left or right to change until the desired region number appears. After the desired region is selected, press Setup to go back to the main screen Afreey LD-2020 Press the Setup button on your remote control.
1. Press the Power button on the player to turn the unit off. 2. Press and hold the Top Menu, Menu and OSD buttons on the unit until the word Factory appears on the LCD display. 3. Quickly press the Power button on the player to turn the unit on. NB: If the setup does not work, you need to perform this step much sooner after step 2. Aiwa HT-DV90 1. Press DVD/CD on the remote control. 2. Press Open on the remote control to open the drive tray. 3. Press C, 2, 5, 8, 0 and C. 4.
. Power off your player and wait a few seconds. 6. Power on your player. To view the firmware version of this player: 1. 2. 3. 4. 5. 6. Press Setup button on the Remote Control. Select TV Aspect and place the cursor on the 16:9 Wide option. Press 1, 3, 9, 7, 1, 3 and 9. Press Enter. You should now see the version information screen. Press Setup on the Remote Control to exit this info screen. RCE discs will require specific region set.
5. Press 6. 6. Press 7. 7. The onscreen display should now request a new region. 8. Press Mute for region free (or 1 for region 1, 2 for region 2...). 9. Press Standby. 10. Press Standby.
Converting to Multi-Region if the above does not work: 1. 2. 3. 4. 5. Power on the player and open the tray. Press 3,8,3 and 8 on the remote control. A menu will then appear at the top of the screen. Press Enter until 9 is displayed. Press 1 to clear the menu and it is region free. Akai DVD-2100SS 1. 2. 3. 4. 5. Press Open on your remote control to open the drive tray. Press 3, 8, 3 and 8, in order, one at a time. Press 9 for region free (1 for region 1, 2 for region 2...).
2. 3. 4. 5. 6. 7. When the Akai logo appears, use the remote control and press Open/Close. Keep the tray open and key in the following on the remote control: 3, 3, 0, 8. The TV should display XXXX in the top left hand corner. Type in the value of 00 for region free (or 01 for region 1 etc.) Press Open/Close on the remote control. Turn the player off and back on again. Akai DV-P2440 1. 2. 3. 4. 5. 6. 7. Turn the player on. When the Akai logo appears, use the remote control and press Open/Close.
Akai DV-P3470 1. 2. 3. 4. 5. 6. 7. 8. Press Open/Close on the remote. Press Setup. Press 1, 3, 6 and 9. Press Left 3 times. Press Right. You should now be in a setup menu. Press 0 for region free (or 1 for region 1, 2 for region 2...). You can also disable Macrovision and enable VCD playback from within this menu. Converting to Multi-Region if the above does not work: 1. 2. 3. 4. 5. 5. 6. 7. 8. 9. Power on the player. Press Open to open the tray. Press Setup to enter the setup menu. Press 4, 9.
6. Press Enter from the remote. 7. Turn Off the unit using the On/Off switch, not Standby. 8. The next time you turn on the unit, the region should be set. Whilst most movies will play with the region set to 0, some Region 1 titles require you to select that zone before they will play. Akai DV-P4500 1. Connect the machine to the mains but do not power on, also ensure there is no disc inserted. 2. Press and hold down both the Dimmer and Reverse Skip buttons on the front panel and then press the Power ON 3.
2. The first line reports the firmware version. 3. Choose 0 for region free. Other options available in this menu: 4. Pressing 7 enable/disable VCD support. 5. Pressing 8 enable/disable MUTE option. 6. Pressing 9 switch from RGB or CVBS output. 7. Switch off from the main button to save the configuration. Alba DVD-45 This player should be region free straight from the box! If it is NOT region free, try this: 1. Press Open/Close to open the players tray. 2. Press 3, 3, 0, 8 and 8 from the remote. 3.
Alba DVD-106 1. 2. 3. 4. 5. 6. 7. 8. Power on player. Press Pause on the Remote. Press 3, 1, 4, 1, 5 and 9. The player display should read "COdE - -". Enter the desired Region (0 = all, 1 = Region 1, 2 = Region 2 etc.). Press Pause again. Power off player. Wait 10 seconds and then power on again. Alba DVD-108 This player should be region free straight from the box! If it is NOT region free, try this: 1. Press PAL/NTSC. 2. Press Menu. 3. Press 0. Allowing VCD Playback: 1. Open the tray. 2.
Alba DVD-109 1. Insert a region 1 disc and press Play. 2. The Message "Wrong Region" will be displayed. 3. Press Display on the remote control. 4. Go to the TC entry and enter 05. 5. Press Play. This setup is lost once the power is turned off the unit so you'll need to re-enter it each time you wish to view a region one disc. May not work and even if it does, it stops working after 10 minutes... Alba DVD-113 This player should be region free straight from the box! NOTES: 1.
Alba DVD-519 1. 2. 3. 4. 5. 6. 7. Remove any Disc. Close tray. Press Setup on Remote . Press Next, Prev, Next, Prev. Ver should appear at the top right. Change to 255 using left and right keys to enable multi-region Turn machine off and on. There may be the opportunity to change the VER numbers from 3001, 4001 and 5001 to 3000, 4000 and 5000, the combinations of which can alter VCD enable/disable, macrovision off/on, user prohibitions off/on. All-Tel DVD-101 1. Open the player's tray. 2.
6. Press select to confirm. 7. Press setup to go back to normal. Amoisonic DVD-7000 For system info make sure no disc in tray, power on and press play several times. Amoisonic DVD-8506 Converting this player to Multi-Region (newer firmware - After October 2001): 1. Just power on the player, make sure no disc is inserted. 2. Using remote Press 0, 1, 0, 6, x, Where x = region (So 01061 is region 1, 01062 is region 2). 3.
1. Open the player's tray. 2. Press 8, 4, 2, 1 using the remote. 3. A hidden menu will appear. NB: You may need to put a DVD into the player and then perform part 2 of the setup. The player may flash "wrong region code" before playing. Converting to Multi-Region if the above fails: 1. 2. 3. 4. 5. Put the region 2 DVD into the player (this player is generally R1 by default). Wait for the "Regional Code Violation" message to disappear. Press 2 on the remote control.
2. These patches will void the warranty on your player! If you understand this, and wish to continue, then continue reading. If not, then there is unfortunately no simple way to make your player region free. Converting to Multi-Region (AT YOUR OWN RISK!!!): 1. In order to enable VCD and SVCD playback, region free and macrovision off, you need to download a firmware and create a CD that is used to 'upgrade' the player. 2. Search for "Apex firmware setup" http://www.nerd-out.com/darrenk/1100WB/1100WB.
4. The word REGION and then the number you selected should briefly appear on screen to confirm that the setup has been successful. Converting to Multi-Region if the above fails: 1. 2. 3. 4. 5. Press Setup on the remote. A menu should now be displayed. Press the buttons 4, 7, 9 and 2 on the remote control, in order, one at a time Using the Left and Right keys on your remote control, change the region to 1 for region 1, 2for region 2, and so on Exit the Setup menu Arcam HT-DV90 1.
4. You will see a secret menu, where you can select the region. 5. Select 13 for region free. NOTE : To turn the Macrovision OFF, perform the same setup as above, find the Macrovision Option and then set it to '0'. This will disable the Macrovision until the player is switched off. NB: Macrovision will have to be re-set if the player is powered off. Ascomtec DVD-3003 1. 2. 3. 4. Open the player's tray. Press Setup on the remote. Press 8, 8, 8, 8.
5. Turn off the machine with remote control. 6. Turn the machine back on with the remote control. 7. Insert the region disc you want to play. Converting to Multi-Region if the above does not work: 1. 2. 3. 4. 5. 6. 7. Open the drive tray. Press Setup on the remote control. Press 1, 9, and 9 with the remote control. Select the REGION option from the hidden menu that appears to change to all regions or a specific region. Turn off the machine with remote control.
Audiosonic DVD-2005 Open the disc tray. Press 8, 4, 2, 1 on the Remote Control. OSD changes to Region code Select desired Region code (9=all regions) with 'Select' Close the players drawer. Converting to Multi-Region if the above does not work: Open the disc tray. Press 7, 7, 7, 7 with the remote. Use the Select key to choose the region code from 1-6 or 9 for region-free.
Awa V520 Ensure the DVD Player tray is empty and closed On the Remote control: Press Setup On the players Front Panel: Press Next Press Stop Press Pause / Step Press Prev Press Next You should now see a new Menu. Go to Select Region and make your choice: Axion DVD-2000 Ensure the players tray is empty and closed. Press Setup on the remote control. Press Next, Stop, Pause/Step, Prev, Next from the player's front panel. You should now see a new MENU.
This brings up a hidden menu (If it doesn't work 1st time open & close the drawer & try again after a few seconds) Select the 1st line of the menu and press Ok Then select 0 for multi-region - CAUTION do not touch any other settings Press Exit to leave the menu and the hack is complete Bluesky DS-8315K Open the drawer of the reader via the remote control. Press successively keys 8, 4, 2, and 1. Choose the zone desired in the menu. Note: this setup may not work after step 2 for some models.
Press Number 9 Button Press Number 4 Button Press the Shuffle Button Press Stop Press Mute To reset to a specific region; Open the disk tray first to ensure it works Press Stop Button Press Shuffle Button Press Region number of the DVD discs sold in that region (eg for region 4, press the number 4 button) Press Enter Bose Lifestyle 28 1. 2. 1. 2. 3. Press Seek Forward, Tune Up on the remote. Press Shuffle, Stop and Mute.To set a specific region: Press Open to open the player's tray.
Disable Macrovision 1. Press Open, Intro, 0, 7, 1, 2, 1. 2. The onscreen display should read SET OK. NB: Apparently, there is no Intro button on the remote - could this mean that you need to use another button eg, Index or something? Bush DVD-102 Press the Open / Close button on the Remote Control to open the drive tray. Press the buttons 2, 0, 0 and 1 on the Remote Control. Press the Enter button on the Remote Control You will now enter a hidden Setup page, and can change the player to any Region.
If the methods above do not work, you can try this: Open the player's tray. Using the remote control, Press 3, 3, 0, 8, 8, 0, in order, and one at a time. Close the tray. Open the tray and put the region 1 disc in. Close the tray - the film should start. RCE disks may halt the player. For these disks substitute the last 0 in step 2 for the region number of your choice. Bush 2004A Open tray type in 33088 Then press 0 for region free Close tray to complete.
Bush 2035XI Press and open the tray Press set up Press 1 then 3 then 6 then 9 Press the left arrow 3 times Press the right arrow The set up menu should not have a 'version' option that was not there before change the region to 0 (zero) Bush DVD 2008/A Press Open. Press 3 then 3 then 0 then 8 then 8 then 0. Press Play.
1. Turn the player on. 2. Open the tray. 3. Press 0, 8, 1, 5. 4. Press 0 for region free. 5. Close the tray. NB: Macrovision is off from the factory. CAT DV-933 1. Turn the player on. 2. Open the tray. 3. Press 0, 8, 1, 5. 4. Press 0 for region free. 5. Close the tray. NB: Macrovision is off from the factory. CAT DVA-2002 This player is region free from the box. If have problems, Just switch off at mains for 10 minutes. Switch back on, insert region 1 DVD in the tray, and it should play normally.
5. Press 0, 1, 0, 6 and 0 for all regions. 6. It will say OK. Now you have a region free DVD player, including RCE encoded region 1 discs Citizen JDVD-3818 Put the disc in the player. Wait for "wrong region" sign. Press "Title" on the remote control. Clairtone CLDVD101T 1. Press Open, 4, 5, 6, 1, Enter and Close on the remote. 2. Use of the Enter button allows for region select. This may actually be a Macrovision setup. Converting to Multi-Region if the above does not work: 1.
3. Use the arrow keys to change region-255 is region free. 4. Press Enter to confirm the choice. Converting to Multi-Region if the above does not work: 1. Turn DVD Player on. 2. Press Setup on remote. 3. Press 2,1,8,8, a new box appear, go to version. 4. press region specific 1-6 or 0 for region free. 5. Turn off. 6. Turn on. NB: You may see other VER numbers, such as 3001, 4001, 5001 - Change these to 3000, 4000, 5000 to toggle User Prohibitions, VCD and Macrovision on and off Coby DVD-507 1. 2. 3. 4.
Enabling VCD playback: 1. 2. 3. 4. 5. 6. Press Setup on the remote control. Press down arrow 4 times to highlight the Password Setup option. Press Enter/Play to enter the Password area. With the Password Mode section highlighted as "on", press the left arrow 5 times. You should see "VCD ENABLED" in the bottom left hand side of the screen. Press the power off button to finish.
1. Press Open on the remote control to open the drive tray. 2. Press 4, 5, 6 and 1, in order, one at a time. 3. Select Enable to enable Macrovision, or Disable to disable Macrovision. Some have problems altering Macrovision. CyberCOM CC 4931 Open the tray Press "Clear" then press 1,3,6,9 Select the Region code by pressing the corresponding 1-6 region code, or 0 for all Close tray and switch ON/OFF.
1. 2. 3. 4. 5. 6. 7. 8. Ensure the players disk tray is Closed with no disc . Press Menu. Press 1. Press 9. A menu will appear with the region number near the bottom of the screen. Press Enter. Select the desired region. Press Enter to save the settings.
Change region code to 0. If code doesn't work, see "PARENTAL". (setup / general / parental) If "8:OFF" is selected, change to another one (e.g "2 : G") (Password is "1369"). Cyberhome CH-DVD-405 1. Turn on the player. 2. Press Setup. 3. Enter 1, 3, 6, 9. 4. Press 3 x Left. 5. Press 1 x Right. 6. A new entry appears in the setup menu, called "Version" there, you can change the region code with the Up and Down arrows. 7. Changing this value to "0" sets the player region free. Cyberhome CH-DVD-500 1. 2. 3. 4.
2. Press 2, 4 and 7 on the remote. 3. The display should now show "...........". 4. From the remote, enter the code 004 000 000 000 Note that the last digit will not show on the display. D Daewoo 3700 1. Press Open/Close, Setup on the remote control. 2. Press the number of the region you want, or 9 for region free. 3. Press 3, 0, 1, 0, Step, Shuffle, Next on the remote control. To check the region, you will need to see the hidden menu: 1. Press Open/Close, Setup, Shuffle, Step, Next on the remote control.
2. 3. 4. 5. 6. 7. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 2, 0, 1, 0. Press Step. Press Shuffle. Press Next. Convert to Multi-Region (newer firmware), if the above does not work: 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 3, 0, 1, 0. Press Step. Press Shuffle. Press Next. Convert to Multi-Region (newer firmware), if the above does not work: 1. 2. 3. 4. 5. 6. 7.
To convert this player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 2, 0, 1, 0. Press Step. Press Shuffle. Press Next. Convert to Multi-Region (newer firmware), if the above does not work: 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 3, 0, 1, 0. Press Step. Press Shuffle. Press Next.
Daewoo DHC-2300 To convert this player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 2, 0, 1, 0. Press Step. Press Shuffle. Press Next. Convert to Multi-Region (newer firmware), if the above does not work: 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 3, 0, 1, 0. Press Step. Press Shuffle. Press Next.
Lip Synch errors on some titles. Daewoo DHC-8000K 1. Press Stop, 4, 4, 0, 8 on the remote. 2. Press 0 for region free. 3. The onscreen display should indicate the changed region. If nothing happens repeat the above steps but press the indicated buttons in a faster sequence. Daewoo DQD-200 To convert this player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 2, 0, 1, 0. Press Step.
To convert this player to Multi-Region (older firmware): 1. 2. 3. 4. 5. 6, Press Setup on the Remote Control. Press Title. Press Step. Press Next. Using Up and Down, select the Region of your choice or Bypass for Region free Save and then Exit the menu. Lip Synch errors on some titles. Daewoo DQD-2000 To convert this player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 2, 0, 1, 0.
6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the current region status is displayed. To convert this player to Multi-Region (older firmware): 1. 2. 3. 4. 5. 6, Press Setup on the Remote Control. Press Title. Press Step. Press Next. Using Up and Down, select the Region of your choice or Bypass for Region free Save and then Exit the menu. Lip Synch errors on some titles. Daewoo DQD-2100D 1.
1. 2. 3. 4. 5. 6. 7. Turn on the player. Open the player's tray and leave it with no disc in it. Press 8, 9, 2, 6 on the remote. Wait for five seconds. Press 0. Wait for 15 seconds Press the Open/Close button on the front of your DVD (Close lid) Daewoo DVD-S150 1. 2. 3. 4. 5. 6. 7. 8. Power On DVD player. Press Setup. Press 1,3,6,9,8,8,8 and 8. A new button called Version will now appear in the Setup window. Press Down until you come to Version. Press Play. Press Up or Down to select the required region.
4. Press Step 5. Press Next 6. You should be able to see the secret menu and scroll down to DEBUG and the list shows from 1-9 (which is regions). Option 9 is region free/bypass. By default 1 is ticked and will not able to change permanently. Here is the solution to change the Region code: 1. 2. 3. 4. 5. 6. 7. Press Open/Close Press Setup Press X, 3, 0, 1, 0 (where X is your choice of Region 1-9) Press Step Press Shuffle Press Next Go to secret menu and check the Region you set.
Converting to Multi-Region if the above does not work: 1. Power On. 2. Insert a disk. 3. Press Stop twice (full Stop). 4. Press Setup. 5. Press II (Still/Pause). 6. Press Previous. 7. Press Next. 8. The "Factory Control Page" Menu will appear on the Screen. 9. Move to Region Code with Arrow/Direction Buttons on the Remote Control and press Play. 10. Press Setup. Daewoo DVG-4000S 1. Turn the player on. 2. Press Open\Close, to open the tray. 3. Press Setup on the remote control. 4. Press Play. 5.
session. 4. Press Setup. 5. Press Stop. 6. Press |<< (Track backward). 7. Press |>> (Track forward). 8. Enter the Region selection option and select bypass for multi-region. Daewoo DVG-6000N 1. Make sure there is no disc in the player and the tray is closed. 2. Press Open, Setup, Stop, Previous, Next on the reomote 3. A hidden menu will appear, enabling you to select the region number. Daewoo TPSL-102 1. 2. 3. 4. 5. Press Setup, +10, Prev, Next on the remote.
Dansai DVD-951S 1. Press Setup on the Remote 2. Press Stop on the front panel of the player 3. Press Previous on the front panel of the player 4. Press Next on the front panel of the player 5. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free You can also disable Macrovision from this menu. Dansai DVD-952 1. Press Setup on the Remote 2. Press Stop on the front panel of the player 3. Press Previous on the front panel of the player 4.
In the setup menu go to VERSION, Press PLAY 1. 2. 3. 4. Press Right Arrow (>). Press Up/Down Arrow to change region. 0 is region free. Press Play to lock region. Daytek DVD-707 1. 2. 3. 4. 5. 6. 7. 8. Power On the player. Press Setup. Press 1,3,6,9,8,8,8 and 8 on the remote. A new menu item, "version", appears. Press Cursor Down until "version" is highlighted. Press Play. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region). Press Setup. Daytek DVD-1500 1. 2. 3. 4. 5.
4. Press Next. 5. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free 6. You can also disable Macrovision from this menu. Deccavideo DDV-2120 1. Press Setup on your remote control. 2. Press Play on the player 3. Press Stop. 4. Press Rev. 5. Press Fwd. 6. Press Prev. 7. Press Next. 8.
Denver DVD-311 Power on the unit and open the DVD CD Tray Press the following on the Remote Control 3, 3, 0, 8, 8 You will see in the top left of the screen "****" appear Key in a number corresponding to the Region you desire your player to be set to, i.e. 1 for Region 1, 2 for Region 2 and so on, use 0 for Region free Denver DVD-321 Power on the unit. Press Open button on the front panel. Press Setup. Press 3, 3, 0, 8, 8 on the remote. You will see in the top left of the screen "****" appear.
This brings up the engineers menu The region code is listed under "country code" and can be changed from 1 to 2 or whatever , (NOTE if you change it to 13 it will play all discs 1 or 2 but I don't as yet know if this is a sort of region 0 and would cause problems with certain discs which apparently will not play on region 0 machines) Press play to exit menu then close drawer and away you go.
Check firmware revision: 1. Press Setup button on the Remote. 2. Press 1, 2, 3 and then 4. 3. You should now see the firmware version date. Checking for firmware if the above does not work on your system: 1. Press Setup button on the Remote. 2. Press 1, 2, 3, 4 and then 5. 3. You should now see the firmware version date. Converting this player to Multi-Region: 1. Press Setup button on the remote. 2. Using the onscreen menu, select the Preferences option. 3. Press Still/Step. 4. Press Prev. 5. Press Next. 6.
7. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region). 8. Press Setup. Converting to Multi-Region if the above does not work: 1. Power up the DVD player and open the tray. 2. Press Menu from the remote. 3. Press 2,0,1,1. 4. Press 0 for region free (or another region number). 5. You should see SET OK on the screen. Digix Media DV-288 1. 2. 3. 4. 5. 6. 7. 8. Power On the player. Press Setup. Press 1,3,6,9,8,8,8 and 8 on the remote. A new menu item, "version", appears.
5. Change the region to the number required or use 0 for region free. 6. Press Enter on the remote control to open the drive tray. 7. Press Setup. DM Tech DVD-2000 1. 2. 3. 4. 5. 6. 7. Press Open and Setup on the remote. Highlight the Custom menu with the remote control. Press 3, 3, 3 and 3. A hidden menu should appear. Change the region to the number required or use 0 for region free. Press Enter on the remote control to open the drive tray. Press Setup. DM Tech DVD-2010 1. 2. 3. 4. 5. 6. 7.
6. Press Index (1-All). 7. Press Open. 8. Press 1. Dual DVD-8100MP 1. Press Menu on your remote control. 2. Press 1. 3. Press 6. 4. Press 7. 5. Press 0 for all regions (or select a region number). 6. Your unit will now be locked from use. 7. Press and hold Stop. 8. Press Power. 9. Release the Stop button now. 10. The unit should now be unlocked, with the new region set. DuraBrand DP-305 1. Power on the player - not from standby, use the power switch! 2. Press Open/Close once. 3. Press 8, 8, 8 and 8. 4.
1. 2. 3. 4. 5. Press Open, Press-3, 8, 0, 0, and Menu. A hidden menu should appear. Set region to 0 for region free. Press Setup. LSI MPEG version: 1. Ensure there is no disc in the player's tray. 2. Press 7, 7, Play. 3. A hidden menu should appear., 4. Set region to 0 for region free. 5. Press Setup.
3. XXXX will appear on the top left hand corner of the screen. 4. Press 0 for all regions (or 1, 2, 3 etc for a region). 5. Close the tray. Emerson EMD-2100 1. 2. 4. 5. Press Open. Press 9 for region free (or desired region number). Press 2, 0, 1 and 0 on the remote control. If this does not work try pressing 5, 0, 1, 0 fast. Press Setup, Shuffle and Next. (Point remote directly at the player, as open tray can interrupt the signal). Check the region setting: 1.
4. CSS allows you to set to Auto (plays all DVDs), or Off (will not play copyrighted DVDs). 5. Macrovision allows you to set to Auto (Copy protection on), or Off (Copy protection off). Converting this player to Multi-Region (older firmware): 1. Press Setup button on the remote. 2. Using the onscreen menu, select the Preferences option. 3. Press Still/Step. 4. Press Prev. 5. Press Next. 6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free.
7. Push > and change the region code with up/down buttons. 0 is multi region. 8. Press Setup button to confirm. NB:You can change the VCD setting from same menu. EuroLine DVH-6675 1. Open the drive tray. 2. Press the buttons 9, 8, 1 and 7 on your remote, one at a time and in order. 3. You will now be in the hidden menu where you can change the region from 1 to 6 by pressing Enter on your remote control, or set it to 9 for multi-region. 4. You can also disable Macrovision from this screen. 5.
Open player tray. Press Setup. Press Chapter Back (I<<), Chapter Forward (>>I) and Stop. "Version" menu should appear. Enter into the new menu and change "region" to 0. Finlux DVD-410 Don't insert disc Press set-up, stop, previous track and then next track Now you are in the factory menu and you can set the region and macrovision. Finlux DVD-510 Press set-up Go to general set-up Press play Go to TV display Press stop, |<<, >>|.
FujiLink TH368 Open Press Setup Press region number (no region=0) Press Step. Press Prev. Press Next. Press Setup. Close. G GE Digital GE1105P & GE Digital GE1106P Power on your player Press stop and then press play on the player Immediately you should see a language screen (if bought in usa you will have 3 options) Select language Then press the repeat button on your remote control.
3. 4. 5. 6. 7. Press Setup. Highlight Custom on the Setup menu. Press 3, 3, 3, 3. A hidden menu will appear headed "Secret1". Select region 0 for region free. Go-Video 860 1. 2. 3. 4. 5. 6. 7. Turn on the player. Open the system tray. Press Setup. Highlight Custom on the Setup menu. Press 3, 3, 3, 3. A hidden menu will appear headed "Secret1". Select region 0 for region free. Go-Video 865 1. 2. 3. 4. 5. 6. 7. Turn on the player. Open the system tray. Press Setup. Highlight Custom on the Setup menu.
Press Next. Press Prev. A code should appear on the onscreen display. Using the direction buttons on your remote control, change the code to VER 255 for multi-region playback. Press Setup. Converting to Multi-Region if the above does not work: (with additional options) Press Setup on your remote control. Press Next. NB: If steps 2 thru 5 have no effect, try the equivalent buttons on the player itself. Press Prev. Press Next. Press Prev. A code should appear on the onscreen display.
Goodmans DVD-130 1. 2. 3. 4. 5. Turn on the player and Open disc tray. Press Setup. Select Custom. Press 3, 3, 3, 3 and 3. This opens the secret settings menu offering Regions 0-6 (choose 0 for Region free). Goodmans DVD-131 1. Press Setup on the Remote Control. 2. Press Vol+. 3. Press Vol-. 4. Press Vol+. 5. Press Vol-. 6. The onscreen display should show "VER #" indicating the currently Region setting Using the Left and Right cursor keys, Change the region code. 255 is region free. 7. Press Setup.
5. You can also disable Macrovision from this screen. NB: If your TV does not support NTSC, you can also set the output to PAL from this screen. Goodmans DVD 1000 Press Menu Press 1, 6, 7 on your remote control The key region box will pop up Press the region you want Press Mute.
You may need to use the up and down buttons to select the parental controls option before you change it You can also change the code to VER 4001 to enable Macrovision, or VER 4000 to disable this feature You may need to use the up and down buttons to select the Macrovision option before you change it You can also change the code to VER 5001 to disable VCD/SVCD playback, or VER 5000 to enable this feature You may need to use the up and down buttons to select the VCD/SVCD playback option before you change it
Without disc Press 31415900 "EXIT" Code 2 Without disc Press "0" "0" and then "exit" This will set it to all regions. Code 3 In stand-by mode From remote control, press 0 0 1 for R1, 0 0 2 for R2, 0 0 3 for R3, and so on, which you desire. Gradiente D-12 Code 1 Turn the player on and ensure there is no disk in the tray Key in the following code from the Remote Control 31415900 Then press "EXIT" You should receive a message in English stating the machine is now Region Free.
Gradiente K-30 Ensure there is no disc in the players tray Key in on the Remote Control 0, 0 and then Clear You should see a message "AUTO" appear indicating that the machine is Region free Graetz AV-330I 1. Press Open to open the tray. 2. Press Intro, 2, 0, 1 and 1. 3. Press 0 for region free (or region umber required). 4. Press Close and then play the disc. Once you turn the machine off it reverts to the original setting. Converting to Multi-Region if the above does not work: 1. Press Open. 2.
Converting the player to Multi-Region (newer firmware): Press Setup on your remote control. Press VOL+. Press VOL-. Press VOL+. Press VOL-. The onscreen display should show "VER #" indicating the currently set region. Using the left and right cursor keys, change the region code to 1 for Region 1, 2 for Region 2, and so on, or set it to 255 for multi-region playback. Press Setup.
Grundig GDV-212 Open the DVD Player CD Tray Place a Region 1 disc in the tray, but don't close it Press the buttons 0, 1, 2 and then 3 on the Remote Control in order, one at a time Press the Play button on either the Remote or the player To change the player back to Region 2 only functionality: Open the DVD players tray Place a Region 2 disc in the tray, but don't close it Press the buttons Return and then Play on the Remote Control in order, one at a time Grundig GDV-220 Converting this player to multi-re
Grunkel DVG-20NT With the disc out and on press, SETUP, STOP, |<<, >>| GVC DV-910B Power up the DVD player with no disc in. Press Setup to access the normal menu. Press STOP then |>| (next track). A factory debug menu will appear with the option to bypass regions and disable macrosvision along with a few other things. H Haaz HZ-250 1. Open the player's tray. 2. Press 9, 9, 9, 9 on the remote. 3. Press OK. 4. Press required region or 9 for region free.
Press the buttons 3, 1, 4, 1, 5, 9 and 2 on the Remote Control The press 1 for Region 1, 2 for Region 2, 3 for Region 3, or 4 for Region 4 etc. The display should now show 'Power On' Harmon DVD-25 Download the dvd25_upgrade.zip file. Burn this file to a CD/RW disc. This firmware upgrade will give region free setting with Marcrovision off and Progressive scan. Harmon DVD-50 Put the player into Standby mode, with no disc in the tray. Press: 3 1 4 1 5 9 and 2 from the remote. Then press the zone you want: 1-4.
disabled (video friendly) or 3.Press number button sequence "7","9","2","8" and "0" to turn ON Macrovision protection enabled (not video friendly) Helios - Most Models Open the drive tray. Press the Setup button on the Remote. Press 1, 9, 9 and 9 on the Remote. Select the REGION option from the hidden menu that appears to change to Multi-Region or a specific Region. Turn off the machine with Remote Control. Turn the machine back on with the Remote Control. Insert the disc from the Region you want to play.
For Region 1 use 2, 9, 3, 3 and 4, For Region 2 use 3, 8, 7, 6 and 7 For Region 3 use 5, 6, 7, 3 and 2, For Region 4 use 7, 6, 8, 8 and 4 For Region 5 use 5, 3, 8, 1 and 4, For Region 6 use 2, 4, 4, 6 and 2 Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc.
Converting the player to Multi-Region: Press Repeat on the Remote Control. Using the Remote enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate Region 1 use 2, 9, 3, 3 and 4 Region 2 use 3, 8, 7, 6 and 7 Region 3 use 5, 6, 7, 3 and 2 Region 4 use 7, 6, 8, 8 and 4 Region 5 use 5, 3, 8, 1 and 4 Region 6 use 2, 4, 4, 6 and 2 A code should be displayed on the screen indicating the current Region setting of your unit.
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc.
Holland Electronics HE5.1 Make sure there is no disc in the player's tray. Press Setup, Stop, Skip Backword, Skip Forward on the remote. You will now be in a hidden menu where you can change the option Region ID to 1 for Region 1, 2 for Region 2, and so on, or Bypass for multi-region. Press Play, followed by Setup on your remote control. There is also an option for disabling Macrovision. Home Electronics HE-510 1. Make sure there is no disc in the player's tray. 2.
2. 3. 4. 5. 6. 7. Press Setup on your Remote Control Go to the sub-menu "Custom Setup" by pressing the right arrow on your Remote 4 times Press 3, 3, 3 and 3. You should be taken into a new menu entitled "Secret1 Menu". Select 0 for region free. Press Setup.
I ImageView DP-270 Turn on the player and ensure there is no disc in the tray. Press Stop, 0, 0, 0, 8, 7, 1, 5, and 4 on the remote. Press Shift, and 1 or 2 , 3 , 4 , 5, 6 for the region code. You should see REGION CODE CHANGE displayed on the players' screen. At present there is no region-free option.
A new menu should appear. Choose 0 for region free (or a desired region number). Turn off the Player at the main power button at the player. Turn it on again. Settings should now be stored. Janus DVD 1. 2. 3. 4. 5. 6. 7. Turn on the Player. Press Setup on the remote. Press 2, 0, 0 and 2. Press (< or left) then (> or right) and repeat < followed by >. A new menu should then appear which includes a 'version' sub menu.
JNL 7001 Open the tray Input the numerical sequence 2180 followed by the Region number of the software you wish to play (use 9 for Region Free) Close the tray JNL 7003 Open the Tray Key in on the Remote Control 8, 4, 2, 1 The Region Menu should be displayed Use the scroll buttons to select the required Region Close the tray to select and complete JNL Digivision 7002 Open the tray Input the numerical sequence 2180 followed by the Region number of the software you wish to play (use 9 for Region Free) Close
Press DVD Menu twice on the player. When the display reads 000 5858 use the up and down buttons to change the 000 to 02E. Using the Left and Right arrow buttons, change the last four digits until they read 0000 for Region Free, 0001 for Region 1, 0002 for Region 2 or 0004 for Region 4. Press Enter on the player. Press Standby. Press Standby again. Some titles may not play in region free setting. If this happens select the needed region.
This does not work with all XV-501BK models! JVC XV-511BK Make sure there is no Disc in the tray. Shut off the unit and unplug it from the AC outlet. Press and Hold the "Play" and "Open/Close" keys, simultaneously on the player and not the remote control. While holding these keys, plug the AC cord back into the outlet. (TEST and CPU ver# will appear on the display). Press DVD Menu twice on the remote. When the display reads 000 5858 use the up and down buttons to change the 000 to 02E.
AREA CODE COUNTRY TURN TO MULTI AREA 02E **00 ALL 02E 0000 1 02E **01 USA 02E 0101 2 02E **02 JAPAN EUROPE MIDDLE EAST ASIA 02E 0202 3 02E **04 ASIA 02E 0404 For regeion( 5 ) I haven't tried it out, 4 02E **08 MIDDLE/SOUTH AMERICA OCEANIA 02E 0808 6 02E **20 P.R. CHINA 02E 2020 7. Press Standby to turn off the machine. Wait for about 5 seconds and then turn the machine back on. 8. Repeat step 1 to step 7 each time when changing from one region to another. 9. Setup is now complete.
The resume light will turn on Press the Power button to turn the player off Press the Power button again to turn on your player Note: If steps 7 and 8 don't work, unplug and re-plug your player instead of using the power switch to turn the player on and off. K Kendo DVD-530102 1. Power on the player. 2. Press Open\Close, 3, 3, 0, 8, and 8 on the remote. 3. Press 0 for region free, or desired region number. Kendo DVD-530103 1. Power on the player. 2.
3. A menu should appear, with the option to change COUNTRY CODE to the required region number or 13 for region free. 4. You can also enable the prohibition skip feature by changing OP PROH ON from 0 to 1. 5. Select NEXT PAGE to access another menu to remove Macrovision by changing the number from 1 to 0. 6. You can also enable error correction if needed. 7. Press Setup to exit the menu. Kioto 2002-MP 1. 2. 3. 4. 5. 6. 7. Press Open/Close, Stop on the remote. Press 1, 9, 9, 9.
On Remote Press: Eject, Clear, 276, Enter. Kiss 715 Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: A = Region 1, B = Region 2, C = Region 3, D = Region 4 E = Region 5, F = Region 6, *** Region Free . Press Setup KLH DVD-33 Turn on the DVD Player. Use the FCN key to put it in DVD mode. Open the disc tray and wait for the display to say "\OPEN\". On the remote, press 9817.
3. Press 6. 4. Press 7. 5. Press Mute for region free. Enabling VCD Playback: 1. 2. 3. 4. 5. 6. Place an audio CD in the player's tray. Press Stop on the remote. Press Menu. Press 1. Press Index. Press Open. Koss C220 1. 2. 3. 4. 5. Press the Menu button on your remote control. Press 1. Press 6. Press 7. Press Mute for region free. Enabling VCD Playback: 1. Place an audio CD in the player's tray. 2. Press Stop on the remote. 3. Press Menu. 4. Press 1. 5. Press Index. 6. Press Open.
2. 3. 4. 5. 6. Press Stop on the remote. Press Menu. Press 1. Press Index. Press Open. Koss KD250 1. 2. 3. 4. 5. Press the Menu button on your remote control. Press 1. Press 6. Press 7. Press Mute for region free. Enabling VCD Playback: 1. 2. 3. 4. 5. 6. Place an audio CD in the player's tray. Press Stop on the remote. Press Menu. Press 1. Press Index. Press Open. Koss KD260-2 1. 2. 3. 4. 5. Press the Menu button on your remote control. Press 1. Press 6. Press 7. Press Mute (or 0) for region free.
L Labway X-Wave 1000 Turn the player on without a disc in the tray Press Setup Press Step Press Fast Forward Press Fast Backward You are now in the 'miscellaneous menu' Press Pause Press Stop Press + or - to go to the required region or go to 00 to make the player region free Exit the menu Turn off the player Turn it on and it's region free or in the region you selected Labway X-Wave 900 Turn the player on without a disc in the tray Press Setup Press Step Press Fast Forward Press Fast Backward You are now
Press Open/Close button on remote. Press Setup. Press VOL+. Press VOL-. Press VOL+. Press VOL-. The words VER 1 appear on screen and with the blue arrows keys you can change the region. Press Open/Close. Lasonic DVD-8050 Press Eject leave tray open. Press 1, 1, 1 and 1 followed by the region number you want. Close tray and play the movie. Lasonic DVD-8090 Press Open/Close button on remote. Press Setup. Press VOL+. Press VOL-. Press VOL+. Press VOL-.
Press Right. The words Region Free should briefly appear on screen to confirm that the setup has been successful. Won't play interactive DVD games like Dragons Lair Lasonic DVD-8870 Press Open/Close button on remote. Press Setup. Press VOL+. Press VOL-. Press VOL+. Press VOL-. The words VER 1 appear on screen and with the blue arrows keys you can change the region. Press Open/Close.
Press 1. Press 9. NB: If 9 does not work in step 4, use 1 instead. Lenco DVD-12 Turn the player on and open the tray. Press 3. Press 3. Press 0. Press 8. Press 8. Press 0. NB: After every number you need to wait until the hand disappears. The code only works with the 02a version. The DVD-02 version is already region and Macrovision free. Enable VCD / SVCD Playback: Open player tray. Press 1. Press 1. Press 9. NB: If 9 does not work in step 4, use 1 instead. Lenco DVD-14 Turn the player on and open the tray.
DVD on with No disc, Press SETUP NEXT PREV NEXT PREV with remote. You'll see "VER 1" on the upper left corner. With LEFT and RIGHT you can change the value. Change it to 255 (Region Free). Lenoxx DVD-9000 Open the DVD tray Key in on the Remote Control the code 9, 6, 5, 3 If you see 00 in the top right corner of your screen it means it is region free If you now select 01, 02, 03, 04, 05 or 06 it will select a region manually Lenoxx DVD-9300 Open the DVD tray Press 9, 6, 5 and 3 on the remote.
3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on. NB: If the above code fails to work then once the player has displayed the "No disc" message press Stop before entering the above code. Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote.
LG DVD-585P 1. Download the Region Select CD-ROM files lg5000.zip file http://www.area450.co.uk/lg5083hack.htm 2. 3. 4. 5. Unzip the archive. Burn the entire directory to a CD-ROM (so that the directory RMTM0000 appears in the root of the CD) Put the CD into the DVD player and power on. When the menu appears, select your region, or 0 for all regions. LG DVD-596M 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4.
6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on. NB: If the above code fails to work then once the player has displayed the "No disc" message press Stop before entering the above code. Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-2300 1.
1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on.
Lip-sync errors on some titles. The hidden menu also may allow you to disable macrovision. LG DVD-3200E 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on.
3. 4. 5. 6. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-3351 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7.
1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-4010 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.).
entering the above code. Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-4721P 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5.
6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on. NB: If the above code fails to work then once the player has displayed the "No disc" message press Stop before entering the above code. Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-4830 1.
4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on. NB: If the above code fails to work then once the player has displayed the "No disc" message press Stop before entering the above code. Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect.
1. Download the Region Select CD-ROM files lg5000.zip file. http://www.area450.co.uk/images/LG5000.zip 2. 3. 4. 5. Unzip the archive. Burn the entire directory to a CD-ROM (so that the directory RMTM0000 appears in the root of the CD) Put the CD into the DVD player and power on. When the menu appears, select your region, or 0 for all regions. LG DVD_5522/N 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4.
Checking Firmware version: 1. 2. 3. 4. 5. 6. Press Setup on the Remote. Select TV Aspect. Place the cursor on 16:9 wide. Enter 1, 3, 9, 7, 1, 3, 9 on the Remote. Press Enter on the Remote. Press Setup to clear the information once read. LG DVD-6053 1. 2. 3. 4. 5. Download the Region Select CD-ROM files lg5000.zip file. http://www.area450.co.uk/images/LG5000.zip Unzip the archive.
LG DVP-H13 1. Power on the player with no disk in the drive. 2. Wait for the "No Disc" message to appear. 3. Press Pause on the Remote. 4. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE or FF appears on the display). 5. Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). 6. Press Pause on the Remote. 7. Power the player off, wait 30 seconds and then power back on.
5. Press Enter on the Remote. 6. Press Setup to clear the information once read. Lifetec LT-7989 Ensure there is no disc in the players draw Press "Menu" on the Remote Control Then press "1" Then press "6" Then press "7" Then press "Mute" Note: it MAY not be necessary to press "Menu" at step 2. So if it doesn't work pressing this try the setup skipping step 2. Limit DVD-8070 1. Power on the player. 2. Press Open/Close. 3. Press 8, 4, 2 and 1 on the remote. 4. The current Region will be displayed. 5.
4. 5. 6. 7. 8. 9. Press Left three times, in succession. Press Right. You should now be in a setup menu. Select the Version option from the menu, then select the Region option. You can now change the region to 1 for region 1, 2 for region 2, and so on, or 0 for multi-region playback. You can also disable Macrovision and enable VCD playback from this menu. Limit DVP-3000b 1. Power on the player. 2. Press Open/Close. 3. Press 8, 4, 2 and 1 on the remote. 4. The current Region will be displayed. 5.
Logix DVD-3000 To convert this player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open on your Remote Control. Press Setup. Press 9 button for Region Free, or 1 for Region 1, 2 for Region 2, and so on Press 2, 0, 1 and then 0 on your Remote, or if this doesn't work, try pressing the buttons 3, 0, 1 and then 0 Press Step. Press Shuffle. Press Next. To check the current region setting of this player (newer firmware): 1. Press the Open button on the Remote Control. 2. Press Setup. 3.
1) Power on the Logix-3300D DVD Player 2) Press the OPEN/CLOSE button on the remote once 3) Press the SETUP Button 4) Press the blue right arrow button 4 times to CUSTOM SETUP menu 5) Press 3 Button 4 times 6) Press the blue right arrow button once 7) Move up and down to select your desired region code, CODE 0 represents Auto-Region 8) Press ENTER button when you have selected 9) Press SETUP button to save settings Luma 929K 1. Press Setup on your remote control. 2. Press Last. 3. Press Skip Previous. 4.
Converting this player to Multi-Region (older firmware): 1. Press DVD on your remote control. 2. Press Open/Close. 3. Place a Region 1 disc in the tray (or any different region). 4. Press Open/Close. 5. Wait until the player ejects the disc, displaying an error message and leaving the tray open. 6. Remove the Region 1 disc from the tray. 7. Press Open/Close. 8. Wait until the display shows the words 'NO DISC'. 9. Press Time Search. 10. Press 1, 1, and 9 in order, one at a time. 11. Press Open/Close. 12.
Converting the player to Multi-Region (newer firmware): 1. 2. 3. 4. 5. 6. 7. Press Open on the Remote. Press Setup. Press 9 button on the Remote for Region Free, or 1 for Region 1, 2 for Region 2, and so on Press buttons 2, 0, 0 and 0. Press Step. Press Shuffle. Press Next. To check the current region setting of this player on later firmware versions, press the following button in order from the Remote Control: 1. Press Open. 2. Press Setup. 3. Press Shuffle. 4. Press Step. 5. Press Next. 6.
To fix low sound output volumes when connecting to your TV via SCART (newer firmware): 1. Press Setup. 2. Press Stop. 3. Press Step. 4. Press Angle. 5. The word RFOUT will appear on screen briefly and the sound will now have been adjusted to normal levels 6. A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the current region status is displayed. Converting this player to Multi-Region (older firmware): 1. 2. 3. 4. 5. 6. Press Setup on the Remote Control.
2. Press 7, Select/Enter, Select/Enter on the remote control. 3. You should now be in the hidden menu. 4. Change the region to the desired number. Maplin SMC MK2 1. Press the Open/Close on the players remote control to open the drive tray. 2. Press 2, 0, 0 and 1, in order one at a time. 3. Press Enter. 4. You will now enter a hidden Setup page, and can change the player to any Region. To set it to Region Free enter 13 as the country code. You can also disable Macrovision from this menu. 5.
6. Key in the number of the Region you want to use, or 0 for Multi-Region. 7. Press Pause. No known problems, other than the change limit of 15 times. Marantz DV-4000 NOTE: Please note that this conversion may only work a maximum of 15 times! After this time the machine may end up locked on the last region! 1. Turn player on with no disk in the tray. 2. Wait for "No Disk" to appear on font panel display 3. Press Dimmer (on front panel) 4. Press Prev (on front panel) 5. The display should show '----'. 6.
Reset to factory defaults: 1. Press PLAY, 1, 5, 9 on the remote control. 2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. No known problems, other than the change limit of 15 times. Marantz DV-4200FN NOTE: Please note that this conversion may only work a maximum of 15 times! After this time the machine may end up locked on the last region! 1. 2. 3. 4. 5. 6. 7. Turn player on with no disk in the tray.
5. 6. 6. 7. Press Next. The service menu will appear on the screen. Select Debug with Up/Dn key - The current region can be seen. Power off to finish the service mode. Converting the player to Multi-Region: 1. 2. 3. 4. 5. 6. 7. Open the player's tray. Press Setup. Press 9 for region free (or 1 to 6 for specific region) Press 1, 1, 1, 1. Press Pause/Step. Press Shuffle. Press Next.
Marantz DV-7000 NOTE: Please note that this conversion may only work a maximum of 15 times! After this time the machine may end up locked on the last region! 1. 2. 3. 4. 5. 6. 7. 8. Turn on the player with no disc in the tray. Press Next and Previous (on front panel) at the same time. The display shows Region 2. Press Stop (on front panel) for 5 seconds. The display now shows Region 0. Press Play. The display should show Region 0 OK. Turn power off and on.
5. Immediately press Right Arrow (once). 6. You should see VERSION on the on screen display. 7. Select this option and change to 0 for region free. Mascom DVD-MC450 1. 2. 3. 4. 5. 6. 7. Open the player's tray. Press Right Arrow. Press Left Arrow. Press Down Arrow. Press Up Arrow. Press Display. Choose 0 for region free (or choose desired region). There are also a few other numbers that can enable/disable certain options.
NB: If the unit is reset or powered off for a long time, it might revert back to region 2. If this happens, repeat the above steps for region free Matsui DVDR 100 Turn unit on. Open the Disc Tray. On the remote control type 349734. Press the number of the Region you require, 0 to 6. (0 = All Regions) Maxmann DVD-1000 1. 2. 3. 4. 5. 6. 7. 8. 9. Turn the machine on and ensure that there is no disc in the tray. Cold start the player (method not given - see your manual).
Close the players drawer Medion MD 41862 Open Tray Press 1,3,6,9 Select region code by pressing: 1 = Region 1 2 = Region 2 3 = Region 3 4 = Region 4 5 = Region 5 6 = Region 6 0 = CODEFREE Close Tray Switch ON/OFF Medion MD-4310 1. Press Open/Close button on your remote control. 2. Press Setup. 3. Press 0 for region free (or press desired region number). 4. Press Pause. 5. Press Step Back. 6. Press Step Forward. 7. Press Setup. No known problems, however this may NOT work on all MD-4310 models.
To enable RCE discs to play: 1. Press Open/Close button on your remote control. 2. Press Setup. 3. Go to the Custom setup Menu. 4. Press 3, 3, 3, 3 on the remote control. 5. Enter region number of the disk with the RCE protection. NB: If you use region 0, then RCE discs will play regardless apparently. Medion MD-4718 1. 2. 3. 4. 5. 6. 7. Press Open/Close button on your remote control. Press Setup. Press 0 for region free (or press desired region number). Press Pause. Press Step Back. Press Step Forward.
Colored Box Version: 1. Press Setup on the remote.. 2. Press 0. 3. Press Pause. 4. Press Skip Back. 5. Press Skip Forwards. 6. Press Setup on the remote control to finish. Orange and White Box Version: 1. Press Setup on the remote.. 2. Press 7. 3. Press Pause. 4. Press Skip Forward. 5. Press Skip Back. 6. Press Setup on the remote control to finish. Black Box verion: 1. 2. 3. 4. 5. 6. 7. Press Open/Close button on your remote control. Press Clear. Press 1. Press 3. Press 6. Press 9.
1. 2. 3. 4. Press 7, 7 and Select on the Remote control. You Should now be in a secret menu. Change the Country Code to 13 for Multi-Region, which is auto switching even on Hard Coded DVD discs To disable Macrovision change the 0 to a 1. Celo-80 Converting the player to Multi-Region (older firmware): 1. 2. 3. 4. Press 2, 9, 1 and 8 on the remote. Press Enter. You Should now be in a secret menu. Change the Country Code to 13 for Multi-Region.
NOTE: Please note that this conversion may only work a maximum of 25 times! After this time the machine may end up locked on the last region! 1. Put the player in stop mode, no disc loaded 2. Press 2. 3. Press 7. 4. Press 4. 5. The screen should show "- - - - - - - - - - - -" 6.
Press Next You can now set factory settings as you like including region code Mitsubishi Black Diamond BD24DVD Converting this player to Multi-Region: This player is confirmed region free from the box. Mitsui 650 Open the drive tray Key in using the Remote 8926# (where # = Region number i.e. 1, 2, 4 etc. 0 = multi region and no macrovision) Monitsu DVD-56 1. Press Setup. 2. Press Next. 3. Press Prev. 4. Press Next. 5. Press Prev. 6. A code should appear on the onscreen display. 7.
Monyika 713 Switch it on Press Setup, Slow Press Skip left, Press Skip right Use the Right Arrow button to select the desired region: A Region 1, B Region 2, C Region 3, D Region 4 E Region 5, F Region 6, *** Region Free Press Setup Monyika 715 Switch it on Press Setup, Slow Press Skip left, Press Skip right Use the Right Arrow button to select the desired region: A Region 1, B Region 2, C Region 3, D Region 4 E Region 5, F Region 6, *** Region Free Press Setup Moniyka DVD-8200 Switch it on Press Setup, Sl
11. Press Setup. 12. Press Setup. 2. Mustek DVD-V100 1. Press Setup on your remote control 2. Press Next. NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself 3. Press Prev. 4. Press Next. 5. Press Prev. 6. A code should appear on the onscreen display 7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so on, or VER 255 for multi-region playback. 8. Press Setup.
7. Press Prev. 8. Press Next. 9. You should now see a new menu. 10. Go to Select Region and make your choice. Bypass is region free. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press the volume + and - keys alternating until you see "VER #" (# is your current Region code). Use the Cursor keys to choose VER 255 (Region free). Press Setup. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press Next, Prev, Next, Prev.
3. Then you will find the menu. It says 'ver x'. x is you Region code. Press PREV until x=255 for Region free mode. 4. Press Setup. US Models NOTE: US Models can play PAL and NTCS. Select Auto in the setup menu (accessed via one above methods) if playing PAL discs on an NTSC TV. Mustek DVD-V560 Converting this player to Multi-Region (newer firmware): 1. Empty Tray. 2. Press Setup on Remote. 3. Press Next. 4. Press Prev. 5. Press Next. 6. Press Prev. 7. On Right Upper Corner will be written Ver#. 8.
so on, or VER 255 for multi-region playback. 8. Press Setup. Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback: 1. Press Setup on your remote control 2. Press Next. NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself 3. Press Prev. 4. Press Next. 5. Press Prev. 6. A code should appear on the onscreen display 7.
4. Press Next. 5. Press Prev. 6. A code should appear on the onscreen display 7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so on, or VER 255 for multi-region playback. 8. Press Setup. Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback: 1. Press Setup on your remote control 2. Press Next. NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself 3.
7. Press Prev. 8. Press Next. 9. You should now see a new menu. 10. Go to Select Region and make your choice. Bypass is region free. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press the volume + and - keys alternating until you see "VER #" (# is your current Region code). Use the Cursor keys to choose VER 255 (Region free). Press Setup. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press Next, Prev, Next, Prev.
disable these controls. 9. Using the Arrow keys, go to 4001 option: the code to VER 4001 to enable Macrovision, or VER 4000 to disable this feature. 10. Using the Arrow keys, go to 5001 option: the code to VER 5001 to disable VCD/SVCD playback, or VER 5000 to enable this feature. Mustek ScanMagic V200 1. Press Setup on your remote control 2. Press Next. NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself 3. Press Prev. 4. Press Next. 5. Press Prev. 6.
disable these controls. 9. Using the Arrow keys, go to 4001 option: the code to VER 4001 to enable Macrovision, or VER 4000 to disable this feature. 10. Using the Arrow keys, go to 5001 option: the code to VER 5001 to disable VCD/SVCD playback, or VER 5000 to enable this feature. MxOnda MX-DVD850 1. 2. 3. 4. 5. 6. 7. 8. Turn on the player. Open the disc tray, and leave it opened with no disc inside. Press 2, 9, 1 and 8 on the remote. Press Enter. The screen should show you now a grey hidden menu.
NAD L55 1. 2. 3. 4. 5. 6. 7. 8. Set the Remote Control to DVD. Press Pause on the Remote Control. Press 3, 1, 4, 1, 5 and 9. The onscreen display should now show "Code --". Enter the code 01 for Region 1, 02 for Region 2, and so on, or 00 for multi-Region mode. Press Pause. Turn off your DVD player for 30 seconds. Turn on your DVD player. NAD T531 1. Power on the player. 2. Press Pause. 3. Press 3, 1, 4, 1, 5 and 9. 4. The onscreen display should now show "Code --". 5. Press 0 6. Press Pause 7.
Converting the player to Multi-Region if the above does not work: 1. 2. 3. 4. 5. Press Setup on the remote. Highlight the TV Aspect option. Place the cursor over the 16:9 Wide option. Press 1, 3, 9, 7, 1, 3, 9 followed by Enter. DO NOT change VCD settings! Beware, although the code is not listed here, there are reports that entering a code to enable VCD playback may result in the players firmware becoming corrupted thus making the player unusable Naiko N-2001 1. 2. 2. 3. 4. 5. 6.
Nakamichi DVD-10 Connect the machine to the mains but do not power on, also ensure there is no disc inserted Press and hold down both the Dimmer and Reverse Skip buttons on the front panel and then press the Power ON The display should show "NAKAMICHI" Hold the Dimmer & Reverse Skip buttons for a few seconds and the Display should change to "___ ___ ___ ___" from "NAKAMICHI".
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use the specific code for the Region of the disc. NEC NDV-24 1. 2. 3. 4. 5. 6. 7. Make sure there is no Disc in the unit when you turn it on. Press Pause on the remote. Press 3, 1, 4, 1, 5 and 9 on the remote. The word Code should appear on the screen Press the number for the required region (0 = multi-Region) Press Pause Turn the unit off then back on and you're good to go.
NOTE: The remote control must point at the remote sensor, in order for the DVD player to function correctly. Angle: Approximately 30° from each direction. Distance: Max. of 7m from the front of the remote sensor. 1. Open the player's tray. 2. Press 8, 4, 2 and 1. 3. The On Screen Display changes to region code and Macrovision setting. 4. Select the desired region code (9 = region free) and Macrovision setting with Enter. 5. Close the player's tray.
7. Insert DVD, press Play. NB: Region setting is preserved after power down. NOTE: This only works with models that have the serial number starting with HE112. 1. 2. 3. 4. 5. 6. Press Open/Close. Press Setup. Press 1, 3, 6 and 9 Press Left Arrow 3 times (the menu navigation arrow, not |<< or << ). Press Right Arrow 1 time (the menu navigation arrow, not >>| or >> ). Go to version and change the region to 0 for region free.
The unit is apparently Region-free and has no macrovision out of the box, however, if power-spikes hit the player, they can remove these options!!! Converting the player to Multi-Region if the above happens: 1. Press 2, 1, 8, 0 and 9 on the remote. 2. Press 0. 3. Press Enter. NB: The method may have to be repeated anything up to 5 times before it works. O Olidata 1999-E Press set-up and go down until the preferences menu, Press step, back, next.
Optim DS-8302 Press the Open button on the Remote Control to open the disc tray Press the Intro button Using the Remote Control, press the buttons 2, 0, 1, 1 and 0 The onscreen display should now read "Set OK" Orion DVD-2000 1. Power On the player. 2. Press and hold Stop, Open/Close, Skip Forward and Skip Back on the player simultaneously, and hold for 3 seconds. 3. A hidden menu should appear. 4. Release Stop, Open/Close, Skip forward and Skip Back buttons. 5. Select Region Number from the hidden menu. 6.
1. Power On the player. 2. Press and hold Stop, Open/Close, Skip Forward and Skip Back on the player simultaneously, and hold for 3 seconds. 3. A hidden menu should appear. 4. Release Stop, Open/Close, Skip forward and Skip Back buttons. 5. Select Region Number from the hidden menu. 6. Select Free for region free. NB: DO NOT make any selections from the Initialized Type menu as it can leave your machine inoperable. If you do by accident, return to this menu and select option 1. 7. Exit the menu.
Oritron DVD-100 RUBY Ensure the tray is empty Press 'Menu' Press '9' Press 'Open/Close' Press '5' 'Region 1 - 6' should be displayed on screen Enter Region code Press 'Mute Oritron DVD100, 200, 600, 650 With no cd in, press MENU, 1, 6, 7 and MUTE (unlock all regions) Or With no cd in, menu, 9, open, 5, mute.
3. Press Enter to cycle through the Regions or press until 9 appears for Region free operation. 4. Press Open/Close. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Open/Close to open the players tray. Press 9, 9 and 9 on the Remote Control. Press 9 for region free. Press Open/Close. How to disable Macrovision: 1. Press Open/Close to open the players tray. 2. Press 4, 5, 6 and 1. 3. Press Enter. Pacific PDVD-1000 Open tray, enter 8421, press enter until you get to no.
Insert any disc, select the PBC button on the remote control, then followed by selecting the play button. The PBC function is for high-level menus and RCE coding. Panasonic A112, A120, RP56, RV31, RV32, RC-HT80 1. 2. 3. 4. 5. 6. Ensure there is no disc in the tray and that the tray is closed. Press Stop. Press Stop. Press Setup. Press 3, 8, 8, 8 and 3. Press desired region number. Converting the player to Multi-Region if the above does not work: 1.
Open tray, Press 8926 ("*" will be seen on the screen). Then select area (1 to 6) or "0" for all. Press PLAY (tray will close). Philco DV-P2500 Open the player's tray, Press 8 8 8 8 (four "*" will be shown on the screen). Select the region (1 to 6) or "0" for region free. Press play to end the operation and the tray will close. Philco DV-P3000 Open the player's tray. Press 7, 7, 3 and 9. Select Region 0 for Region free (or Region 1 to 6). Press Play (the tray will close).
Press 7, 7. Press Enter (Some Remotes use the "Select" key). Set COUNTRY CODE: 13 then press Enter. Press Play. Put a DVD in the tray. Press Play. How to Disable Macrovison: Turn the player on. Press Eject on the Remote Control. Press 7, 7, Enter (Some Remotes use the "Select" key). Go to next page. Set MACROVISION: 0.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
4. Press 1, 3, 5 and 6. ("REGION CHANGE: XXXX" will appear on screen) 5. Press 0 for region free. 6. Press Stop 5 times to make the setup permanent. To check firmware version and firmware filename press: 'program','1','3','5','6','8' Works with versions: DVD580M171V01-ES-020717 and DVD580M001V01-ES-020827 Philips DVD-612 You will need a One-4-All universal remote for this (Send the infra-red code RC6 (aka Codeset 4, Key 235)): 1. 2. 3. 4. 5. 6. Set up the remote with the code 0, 5, 3, 9.
Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3. Press PLAY on the remote. Reset to factory defaults: 1. Press PLAY, 1, 5, 9 on the remote control. 2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote.
Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3. Press PLAY on the remote. Reset to factory defaults: 1. Press PLAY, 1, 5, 9 on the remote control. 2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote.
Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3. Press PLAY on the remote. Reset to factory defaults: 1. Press PLAY, 1, 5, 9 on the remote control. 2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Philips DVD-625 1. Press 9, 9, 9, 9 on the remote. 2.
digits and the last digit will not show on the on-screen display. 5. Press the Play button on the DVD player's Remote 6. The onscreen display should now show the words No Disc 7. Power off your DVD player, wait 10 seconds and then power back on You may also use the following methods for players with firmware 6.2: 1. Turn your DVD player on 2. The display will show you no disc 3. Press Play and then press 1, 5, 9 on the DVD Remote 4. On DVD display will appear ------ ----5.
1. 2. 3. 4. 5. 6. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 255. Press Enter. The player should now be region-free. To change to a specific region: 1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required.
To change Region code: Press Play on the Remote, followed by 1, 5 and 9 When the display reads '________' enter 005 000 128 156 using the Remote. (Note: the 12 digit code, when there are only 11 spaces.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
Philips DVD-726K Converting the player to Multi-Region: 1. Press 9, 9, 9, 9 on the remote. 2. Press 0 for region free (or press region number required). Philips DVD-727 1. Press 9, 9, 9, 9 on the remote. 2. Press 0 for region free (or press region number required). Philips DVD-728S Converting the player to Multi-Region: 1. Power on the unit. 2. Press Setup on the remote. 3. Open the tray 4. Press 8, 4, 2 and 1 on the remote. 5. The current zone of the player will be displayed on the screen. 6.
2. 3. 4. 5. 6. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 255. Press Enter. The player should now be region-free. To change to a specific region: 1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required.
3. Press 0 for region free or 1 for region 1, 2 for region 2 etc. 4. To check region Open the tray and press Display on the remote. To check the currently set region on this player: 1. Press Open on player to open the drive tray. 2. Press Display on on the remote control. 3. The second line of the onscreen display should display the word REG followed by the currently set region. Philips DVD-733K 1. 2. 3. 4. Open the tray. Press 0, 0, 0 and 0 on your remote control.
7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3. Press PLAY on the remote.
6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3.
5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point 6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2.
4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12 digits and the last digit will not show on the on-screen display. 5. Press the Play button on the DVD player's Remote 6. The onscreen display should now show the words No Disc 7. Power off your DVD player, wait 10 seconds and then power back on You may also use the following methods for players with firmware 6.2: 1. Turn your DVD player on 2. The display will show you no disc 3.
3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12 digits and the last digit will not show on the on-screen display. 5. Press the Play button on the DVD player's Remote 6. The onscreen display should now show the words No Disc 7. Power off your DVD player, wait 10 seconds and then power back on You may also use the following methods for players with firmware 6.2: 1.
3. Press PLAY and then press 1, 5, 9 on the DVD Remote. 4. On DVD display will appear ------ -----. 5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point. 6. Press Play. 7. The player will be turned off. Your DVD is ready. Philips DVD-870P For Region 1: 1. Press Play on the Remote Control. 2. Key in 1, 5, 9. 3. Now key in 005 000 128 156. For Region 2: 1. Press Play on the Remote Control. 2. Key in 1, 5, 9. 3. Now key in 013 000 128 156.
7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3. Press PLAY on the remote.
6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode. 3.
5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point 6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1. Press PLAY, 2, 7, 4 on the remote control. 2.
4. On DVD display will appear ------ ----5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point 6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3. Press PLAY on the remote. Region 2: 1.
3. Press Play and then press 1, 5, 9 on the DVD Remote 4. On DVD display will appear ------ ----5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point 6. Press Play 7. The player will be turned off Your DVD is ready Converting the player to Multi-Region if the above does not work: Region 1: 1. Press PLAY, 2, 7, 4 on the remote control. 2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode. 3.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
1. Press Open on player to open the drive tray. 2. Press Display on your remote. 3. The second line of the onscreen display should display the word REG followed by the currently set region. Philips DVD-Q40 1. 2. 3. 4. 5. Power up the unit ensuring its connected to a TV (OSD on TV is required). Press Open/Close to open the tray. From the Remote enter 1, 1, 1, 1. Press 0 (Country Code) for region free. Press Open/Close to close the tray and the process is complete.
5. Press the Play button on the DVD player's Remote 6. The onscreen display should now show the words No Disc 7. Power off your DVD player, wait 10 seconds and then power back on You may also use the following methods for players with firmware 6.2: 1. Turn your DVD player on 2. The display will show you no disc 3. Press Play and then press 1, 5, 9 on the DVD Remote 4. On DVD display will appear ------ ----5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point 6.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2.
To change to a specific region: 1. 2. 3. 4. Set up the remote with the code 0, 5, 3, 9. Press the MAGIC button. Press 085. The display should read '----' Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required. If you do not have a One-4-All universal remote: If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .
Philips DVP 630 1. Switch on the player. 2. Open the tray. 3. Press 7 8 9 OK 0 on the remote 4. The number 0 will appear on the lower left side of your screen. 5. This player is now region free! Philips LX-3000 Home Cinema To change to region 1: 1. Press Play on the remote. 2. Press 159 111 001 08. 3. Press Play. To change to region 2: 1. Press Play on the remote. 2. Press 159 221 001 08. 3. Press Play. You must reset the player from the System menu after each change.
1. Press the Play button on the player. 2. Using the remote control, key in the following: 1, 5, 9, Play. Philips LX-7000 1. Press the Play button on the player. 2. Press 1, 5 and 9 on the remote. 3. The onscreen display should show spaces like this: '-----------' 4. Press 111 for region 1, or 221 for region 2. 5. Press 0, 0, 3. 6. Press 0, 8. 7. You should now have entered a code in the format XXX-YYY-08 which should be indicated on the onscreen display. 8. Press Play on the remote control.
4. Press 111 for region 1, or 221 for region 2. 5. Press 0, 0, 2. 6. Press 0, 8. 7. You should now have entered a code in the format XXX-YYY-08 which should be indicated on the onscreen display. 8. Press Play on the remote control. To reset the region change counter on this unit to enable another 25 maximum changes: 1. Press the Play button on the player. 2. Using the remote control, key in the following: 1, 5, 9, Play. Philips MX-1060D Converting the player to Multi-Region: 1. 2. 3. 4.
If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a downloadable .pdb file. 1. Download the .pdb file into your Palm Pilot: Palm (V) pdb (Zip file). 2. Press the OmniRemote key marked as 955 Multizone. 3. The onscreen display should show 11 spaces like this: '-----------'. 4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255.
Philips MX-3800D 1. Press the Play button on the player. 2. Press 1, 5 and 9 on the remote. 3. The onscreen display should show spaces like this: '-----------' 4. Press 111 for region 1, or 221 for region 2. 5. Press 0, 0, 2. 6. Press 0, 8. 7. You should now have entered a code in the format XXX-YYY-08 which should be indicated on the onscreen display. 8. Press Play on the remote control. To reset the region change counter on this unit to enable another 25 maximum changes: 1.
If 0 for Region free fails, try 9 Phonotrend DVD-2600 Power on the unit. Press Open on the player's front panel. Press 3, 3, 0, 8 and 8 on the remote. You will see in the top left of the screen "****" appear. Press 0 for region free (or press a the region number required). Converting the player to Multi-Region: Power on the unit. Press Open on the player's front panel. Press 8, 9, 2 and 6 on the remote. You will see in the top left of the screen "****" appear.
Pioneer DV-37 Turn on your DVD player without a disc Press "setup" Press "right Arrow" until "general" is selected Press "down arow" once Press "display" Press "condition Memory" Press "1", "2", "3", "4", "5" or "6" for the Regio Press "setup" After this the unit is ready to play the selected region Pioneer DV-505 With no DVD in the tray, Press MENU, select INITIAL, press DISPLAY, press CONDITION. Then input the number of the zone you want. PLU2 DS-6338B 1. 2. 3. 4.
3. Advance to the far right-hand tab "Preferences". 4. Enter Code # 1379 then use the "up & down arrows" to change the Region Code. 5. Once code is chosen, press Enter Polti DVD-101: 1. Eject the player's tray. 2. Press 1, 4, 5 and 6 on the remote. 3. Press 0 for region free.
Push the SETUP button on your remote control; Arrow down on the remote control to the "Exit Setup" option - BUT DON'T CHOOSE IT!; Now press, 1, 3, 6, 9 on your remote control (TIP - Get pretty close to the unit as the open tray may block the infrared); Using your remote control, press < three times and then > once; A new option appears on the Set Up Menu called "Version", choose it and press the ENTER/> button; Exit all the menus until you arrive back at the blue screen with the DVD logo on; Now press the P
To change it to region 4: 1. Turn on the player with no disc. 2. Enter the following code on the remote: 738 565 250 008 000 0 3. Press Info. 4. After pressing the info key you will see in the display of the DVD "locale 8". To change it to region 1: 1. 2. 3. 4. Turn on the player with no disc. Enter the following code on the remote: 738 565 250 001 000 1 Press Info. After pressing the info key you will see in the display of the DVD "locale 1".
Disable Macrovision and Enable VCD Playback: 2. Press Down twice: ver 4001= macrovision enable. ver 4000= macrovision disable. NB: press Left and Right arrows to change 3. Press Down three times: ver 5001= vcd and svcd disable. ver 5000= vcd and svcd enable. 4. Change to ver 5000 to play vcds or svcds. Enabling SVCD Playback: 1. Turn on the DVD player. 2. Press Setup. 3. Press 1 1 0. 4. In the lower right of the TV screen you'll see the message ON when you repeat these 3 steps it will display OFF. 5.
5. Press Enter on the remote control. 6. Press Setup' to clear the information once read. NOTE: It will always display NO.02 on this display even if you have performed the setup. Radionette RN3150 1. 2. 3. 4. 5. 6. 7. Power on the player with no disc in the drive. Press Pause, 3, 1, 4, 1, 5 and 9 on the remote The word COde appears on the DVD display for a few seconds. Enter region code required on remote (before COde disappears), using 0 for region free if needed. Press Pause on the remote control.
2. 3. 4. 5. 6. Select 'TV Aspect'. Place cursor on '16:9 wide'. Using the remote control, key in the following: 1, 3, 9, 7, 1, 3, 9. Press Enter on the remote control. Press Setup' to clear the information once read. NOTE: It will always display NO.02 on this display even if you have performed the setup. Radionette RN6500 1. 2. 3. 4. 5. 6. 7. Power on the player with no disc in the drive. Press Pause, 3, 1, 4, 1, 5 and 9 on the remote The word COde appears on the DVD display for a few seconds.
On the Remote Control press Setup Then Mute Then Last Then Next RCA DRA-4008AUK 1. Turn on the player, and without a disc in the drive, (using the remote). 2. Press Menu, 1, 6, 7 on the remote. 3. The player will ask you for a region code. Enter the required region number. This player does NOT region free setting. 4. Alternatively, press the required region number. have a Note: This player can play both PAL and NTSC DVD's after the region setup. Anamorphic PAL DVDs play perfectly, as well. RCA DRC-220N 1.
R3 - 5, 6, 7, 3, 2 R4 - 7, 6, 8, 8, 4 R5 - 5, 3, 8, 1, 4 R6 - 2, 4, 4, 6, 2 Setup does not work on all 1150 models. The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 ( or faster ). RCA MRP-5910P Always perform a Cold Start before applying this setup: 1. 2. 3. 4.
1. Open drawer 2. Press setup 3. Enter code 728180 or 628180 The last digit is for the region. Reoc A3 1. 2. 3. 4. 5. 6. Turn the player on. Press Open/Close to open the disc tray. Enter the password(s) 8, 4, 2, 1 or 9, 9, 9, 9, you will then see the current region code on the screen. Select a Region code by pressing Enter continuously. The Region free code is 9. Press Open/Close to close the disc tray. The process of selecting a Region code is now completed. This may not work on all A3 firmware models.
Open the drive tray. Make sure there's no DVD in it then Type 9 8 1 7 or 8 4 2 1 on the remote keypad. You will then be into a hidden menu and Choose regions 1-6 or 9 for region free clicking SELECT (Enter) button. close the tray. Turn the player off for few seconds. Turn it on again. Roadstar DVD-3000 Open the player's tray and ensure there is no disc in it. Press 7 on the remote. Press 7. Press Enter. This should bring up a hidden menu.
3. Press Enter to select VERSION from the menu. 4. On REGIONAL CODE press RIGHT (>). 5. Use Down to change REGIONAL CODE to '0' for region free, or any region number required. 6. Press Enter on Remote Control to save. Converting this player to Multi-Region if this fails: 1. Press Setup on Remote Control. 2. Press 1, 3, 7, 9, 8, 8, 8 and 8 on the remote. 3. Press Enter to select VERSION from the menu. 4. On REGIONAL CODE press RIGHT (>). 5.
Saba DVD-430-SA 1. 2. 3. 4. 5. Press Menu on the remote. Press 1. Press 6. Press 7. You should be able to select any region required, or Mute for region free. Audio select: 1. 2. 3. 4. 5. Press Menu on the remote. Press 1. Press 7. Press Audio. Using "1" will enable 5.1 channel, or "2" for 2 channel. Dealer lock: 1. 2. 3. 4. 5. Press Menu on the remote. Press 2. Press 4. Press 6. You can select "1" for yes to lock, or "2" for no. VCD Enable: 1. 2. 3. 4. 5. Insert an audio CD. Press 1 on the remote.
1. Press Setup button on the Remote. 2. Press 1, 2, 3 and then 4. 3. You should now see the firmware version date. Converting this player to Multi-Region: 1. Press Setup button on the remote. 2. Using the onscreen menu, select the Preferences option. 3. Press Still/Step. 4. Press Prev. 5. Press Next. 6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. You can also disable Macrovision from this menu. Sampo DVD-360 Check firmware revision: 1.
3. You should now be in a hidden menu. 4. You can change the region or set it to region-free. Alternate Multi-Region method: 1. Press the Setup button on your remote. 2. Press 3, 7, 7, 4. 3. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. Select PAL or NTSC: 1. Press Setup on the remote. 2. Press 7, 2, 5, 5, 5 on the remote control. 3. You should now be able to change the output between PAL, NTSC and AUTO. Setting CSS and Macrovision: 1. 2. 3. 4.
2. Press 3, 7, 7, 4. 3. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. Select PAL or NTSC: 1. Press Setup on the remote. 2. Press 7, 2, 5, 5, 5 on the remote control. 3. You should now be able to change the output between PAL, NTSC and AUTO. Setting CSS and Macrovision: 1. 2. 3. 4. 5. Press Setup. Press 5, 9, 0, 4, 1, and 9 on the remote. There are then two options available: CSS and Macrovision.
3. You should now be able to change the output between PAL, NTSC and AUTO. Setting CSS and Macrovision: 1. 2. 3. 4. 5. Press Setup. Press 5, 9, 0, 4, 1, and 9 on the remote. There are then two options available: CSS and Macrovision. CSS allows you to set to Auto (plays all DVDs), or Off (will not play copyrighted DVDs). Macrovision allows you to set to Auto (Copy protection on), or Off (Copy protection off). Sampo DVD-K535 Check firmware revision: 1. Press Setup button on the Remote. 2.
Converting this player to Multi-Region: 1. Press Setup button on the remote. 2. Using the onscreen menu, select the Preferences option. 3. Press Still/Step. 4. Press Prev. 5. Press Next. 6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. You can also disable Macrovision from this menu. Converting this player to Multi-Region if this fails (newer players): 1. Press the Setup on the remote. 2. Press 3, 8, 8, 8, 3 on the remote.
TSDVDREG-2001-9629735-R3 for just Region 3 playback. Samsung DVD-E235D 1. Turn the player on with no disk in the tray. 2. Press Repeat. 3. Press 5, 7, 5, 3, and 8. 4. Press 9 for region free, or choose a region using the following codes: for Region 1 use 2, 9, 3, 3 and 4 for Region 2 use 3, 8, 7, 6 and 7 for Region 3 use 5, 6, 7, 3 and 2 for Region 4 use 7, 6, 8, 8 and 4 for Region 5 use 5, 3, 8, 1 and 4 for Region 6 use 2, 4, 4, 6 and 2 Samsung DVD-H40A 1. Turn the player on with no disk in the tray. 2.
for Region 2 use 3, 8, 7, 6 and 7 for Region 3 use 5, 6, 7, 3 and 2 for Region 4 use 7, 6, 8, 8 and 4 for Region 5 use 5, 3, 8, 1 and 4 for Region 6 use 2, 4, 4, 6 and 2 3. 4. 5. 6. A code should be displayed on the screen indicating the current Region setting of your unit Press 9 for Region free, or press 1 for Region 1, 2 for Region 2 and so on Press Open. Press Standby. Further information has emerged for the very latest players.
NOTE: for the V7000 model, push play and fast forward for about 10 seconds, then quickly press the Subtitle key as in step 2. 1. 2. 2. 3. The player should be powered on, the tray closed without any disc inside. The logo "DVD Video Samsung" visible on screen and the message No Disc must have already appeared. Press Subtitle on the remote - nothing should appear.
1. Turn on the player 2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work.
3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work. Converting to Multi-Region if the above options fail: 1.
Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08: 1. Turn on the player 2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5.
2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work.
5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work. Converting this player to Multi-Region (older firmware): If you have: Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7 Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8 Firmware version 5.02Da through 5.
Converting this player to Multi-Region (older firmware): If you have: Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7 Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8 Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version 5.02Ee. The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or faster.
5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work. Converting this player to Multi-Region (older firmware): If you have: Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7 Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8 Firmware version 5.02Da through 5.
Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version 5.02Ee. The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or faster. Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision.
The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or faster. Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung DVD-S124 If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page.
Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version 5.02Ee. The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or faster. Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung DVD P142 1. Ensure disc tray is empty. 2.
2. Press and hold both the FF and Pause buttons on the players front panel (or Stop and Pause, if that does not work). 3. After a short while you should be presented with a set of language options (choose from 1 to 6). 4. Release the Play and Stop buttons on the player. Converting this player to Multi-Region (newer firmware - 5.02E and above): 1. Press Repeat on your Remote Control. 2. Using the Remote enter the code below.
for Region 4 use 7, 6, 8, 8 and 4 for Region 5 use 5, 3, 8, 1 and 4 for Region 6 use 2, 4, 4, 6 and 2 Samsung DVD-S423 Always perform a Cold Start before applying the setup below: Power on your player whilst pressing hold both the FF and Pause buttons on the front player After a short while you should be presented with a set of language options.
3. 4. 5. 6. A code should be displayed on the screen indicating the current Region setting of your unit Press 9 for Region free, or press 1 for Region 1, 2 for Region 2 and so on Press Open. Press Standby. Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08: 1. Turn on the player 2, Open the DVD tray 3.
for Region 3 use 5, 6, 7, 3 and 2 for Region 4 use 7, 6, 8, 8 and 4 for Region 5 use 5, 3, 8, 1 and 4 for Region 6 use 2, 4, 4, 6 and 2 3. 4. 5. 6. A code should be displayed on the screen indicating the current Region setting of your unit Press 9 for Region free, or press 1 for Region 1, 2 for Region 2 and so on Press Open. Press Standby. Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off.
Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08: 1. Turn on the player 2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5.
Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung DVD-709 If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page. Remember that the steps may need to be entered quickly and from a cold start. Always perform a Cold Start before applying this setup: 1. 2. 3. 4.
Samsung DVD-711 If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page. Remember that the steps may need to be entered quickly and from a cold start. Always perform a Cold Start before applying this setup: 1. 2. 3. 4. Power on your player Press and hold both the Play and Stop buttons on the players front panel After a short while you should be presented with a set of language options (choose from 1 to 6).
Converting this player to Multi-Region (older firmware): 1. Press DVD on your remote control. 2. Press Open/Close. 3. Place a Region 1 disc in the tray (or any different region). 4. Press Open/Close. 5. Wait until the player ejects the disc, displaying an error message and leaving the tray open. 6. Remove the Region 1 disc from the tray. 7. Press Open/Close. 8. Wait until the display shows the words 'NO DISC'. 9. Press Time Search. 10. Press 1, 1, and 9 in order, one at a time. 11. Press Open/Close. 12.
3. 4. 5. 6. A code should be displayed on the screen indicating the current Region setting of your unit Press 9 for Region free, or press 1 for Region 1, 2 for Region 2 and so on Press Open. Press Standby. Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08: 1. Turn on the player 2, Open the DVD tray 3.
5. Press Open. 6. Press Standby. Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08: 1. Turn on the player 2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5.
10. Press 2, 0, and 0 in order, one at a time. 11. Press Open/Close. 12. Place a Region 1 disc in the tray. 13. Press Open/Close. Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung DVD-909 If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page.
The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or faster. Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung HT-DM150 Converting this player to Multi-Region: 1. Switch Off player and Unplug from mains wait 30 seconds. 2. Reconnect to mains. 3. Turn On player with remote. 4. Press Enter on the remote. 5.
2, Open the DVD tray 3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen 4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player 5. Put any Region of DVD in and it will play NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work.
Samsung SV-DVD3E If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page. Remember that the steps may need to be entered quickly and from a cold start. Always perform a Cold Start before applying this setup: 1. 2. 3. 4. Power on your player Press and hold both the Play and Stop buttons on the players front panel After a short while you should be presented with a set of language options (choose from 1 to 6).
2. Press Subtitle on the remote - nothing should appear. 3. Using the remote control, Enter in the code for your original region (see setups above): Region 1 - 2, 9, 3, 3, 4 Region 2 - 3, 8, 7, 6, 7 Region 3 - 5, 6, 7, 3, 2 Region 4 - 7, 6, 8, 8, 4 Region 5 - 5, 3, 8, 1, 4 Region 6 - 2, 4, 4, 6, 2 4. 5. 6. 7. A number should appear - this is the player's region number that was last programmed. Press the number of the region you require, or 9 for region-free. Open the player's tray using the front panel.
NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 setup, it MAY work. Converting this player to Multi-Region (older firmware): If you have: Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7 Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8 Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version 5.02Ee.
If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page. Remember that the steps may need to be entered quickly and from a cold start. Always perform a Cold Start before applying this setup: 1. 2. 3. 4. Power on your player Press and hold both the Play and Stop buttons on the players front panel After a short while you should be presented with a set of language options (choose from 1 to 6).
Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove setup. This setup also removes Macrovision. Samsung V7000 If the any of the setups listed below fail to work then you may want to consider using the other codes listed further down this page. Remember that the steps may need to be entered quickly and from a cold start. Always perform a Cold Start before applying this setup: 1. 2. 3. 4.
6. 7. 8. 9. Change this number to 13 for region free. Select the option below "Region". Change this number to 0 for macrovision free. Press the Eject on the remote control to exit. Not all version allow Macrovision disabling. Sansui DVX 2100 Turn on, eject DVD (leave open), press 2,9,1,8, or 2,8,1,2 then enter, and you are in maintenance menu. Choose the region free option Sansui DVX-2100K 1. 2. 3. 4. 5. 6. 7. 8. 9. Make sure your player is powered on. Make sure the CD tray is Open.
Download the spookytooth-sanyo1500crack.zip. It can be found on this website http://freeloader.stpatricks.tas.edu.au/stats/logs/freeloader.stpatricks.tas.edu.au/usage_200208.html Don’t be fooled by the site’s appearance, this zip is on this website. Sanyo DVD-6070, Sanyo DVD-7201 and Other Sanyo Models Press the Program button on your remote control, Right Cursor, Right Cursor, Enter and then Play. Sanyo SL20 1. Download the file DVDSL20.ZIP . http://members.lycos.co.uk/brobert99/Programs/ 2.
6. Press Shuffle. 7. Press Next. Convert to Multi-Region (newer firmware), if the above does not work: 1. 2. 3. 4. 5. 6. 7. Press Open button on your Remote Control. Press Setup. Press 9 for Region Free, (or 1 to 6 for region). Press 4, 0, 1, 0. Press Step. Press Shuffle. Press Next. To check the current region setting (newer firmware): 1. Press Open on the Remote Control. 2. Press Setup. 3. Press Shuffle 4. Press Step. 5. Press Next. 6.
Scan SC-2500 Open Tray. Enter:0106 on the Remote Control then Enter:Region Number on the Remote Control. (1=Region 1,2=Region 2,0=Multi-region none RCE etc ). OK will now appear on screen. Schaub Lorenz SL-2000 1. Power on the player. 2. Press Open to open the tray. 3. Press Setup to enter the setup menu, 4. Press 4, 9, 5, 4, 0 on remote control in turn, ( press the keys rapidly ). 5. You should see a new menu item. 6. Select VERSION and then Press Play. 7. Select REGION CODE. 8.
Press Volume Up on your Remote Press Fast Forward on your Remote The on screen display will show 321 followed by the current Region code Press Volume Up on your Remote Press Fast Forward on your Remote Repeat steps 5 and 6 until the desired Region code is shown on the display Press and hold the Angle button on the Remote for approximately five seconds to select the Region Schneider DVD-511 Converting this player to all region: Press the Menu button on the Remote Press the 1 button Press the 6 button Press
Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 0 for multi-region playback Press the Open/Close button on your remote control Schneider DVD-1003 Press Open/Close button on your remote control. Press Clear. NB: This is located next to the Zoom button. Press 1. Press 3. Press 6. Press 9. Press 0 for region free (or press desired region number). Schneider HCS-201 1. 2. 3. 4. 5. 6. Open the player's tray. Press 8, 1, 3, 2, 8 on your remote.
Sharp DV-620 1. Power on the player and press the Setup button on your remote 2. Press 3, 8, 8, 8 and 3 3. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free Converting this player to Multi-Region if the above fails: 1. Power on the player and press the Setup button on your remote 2. Press 3, 7, 7, 7 and 4 3.
TSDVDREG-2001-8918448-R0 2. 3. 4. 5. Save the file as CREGIN.TXT Burn this single file to a CD-R using ISO 9660 Mode 1 format (not Joliet). Insert the CD into the DV-740H - note this is not a firmware flash, merely accessing a factory setting. "R0" should appear in the bottom left of the screen - if it does not you may already have a multi-region player. UK/Europe DV-740H/DV-740S: 1. Open a text editor and start with a new blank page. Type the exactly the following: TSDVDREG-2001-8939912-R0 2. 3. 4. 5.
Press the Enter button on your remote control. Press the 7 button again on your remote control. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code. Shinco DVD 360 Press Eject, Remove CD, Close then Press Pause, 1, 2, 3 Or Load the disc. A map will show on the screen. Press the stop button twice. Wait until the "press play to continue" sign disappeared. Press the play mode once.
Press 9, 9, 9, 9 on the remote. You should now be in the hidden region menu. Press Ok to change region code. Region 9 is region free. Close the player's tray. Skyworth DVD-650 To change region code, or make the machine multi-region follow these steps: Open the drive tray Key in using the Remote 8926# (where # = Region number i.e. 1, 2, 4 etc. 0 = multi region and no Macrovision) Skyworth DVD-750 Open the tray.
number). 9. Turn Off and On. Converting this player to Multi-Region (older firmware): 1. Ensure the players tray is empty and closed. 2. On the Remote control Press Setup. 3. Then On the Players Front Panel. 4. Press Next. 5. Press Stop. 6. Press Pause/Step. 7. Press Prev. 8. Press Next. 9. You should now see a new menu. 10. Go to Select Region and make your choice. Bypass is region free. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup.
2. 3. 4. 5. Press 8, 4, 2, 1 on the remote. You should now be in the hidden region menu. Press Select to change region code. Region 9 is region free. Close the player's tray. Converting this player to Multi-Region if the above does not work: 1. 2. 3. 4. 5. Open The player's tray. Press 9, 9, 9, 9 on the remote. You should now be in the hidden region menu. Press Ok to change region code. Region 9 is region free. Close the player's tray. SM Supervision 2550 1. 2. 3. 4. 5. Open The player's tray.
Press 7,7, Select on the Remote Control. A service menu will now appear. Scroll down to "Country Code" and press Select on the Remote Control. Change the setting to the desired Region or 13 for multi-region use. Press Select. Press Return to exit the menu. Starmedia 3023 NOTE: It is possible that this machine is region free out of the box. If not, try this: 1. 2. 3. 4. Open the player's tray. Press 7, 5, 1 and 8 on the remote. Press Setup. Press Next. Studi ST533 1. 2. 3. 4. 5.
Power the player on. Open disc drawer. Type in 0391 on handset then press Enter. Scroll to select country. Enter 9210 and press Enter. Press Setup. Tatung TDV5100 Open the tray then, Press set-up, stop, rew skip, FF skip. Teac DV-1000 1. 2. 3. 4. 5. Turn the player on using the remote control. Press Open button to open the disc tray. Press 2, 1, 6, 8 on the remote. The current region should now be displayed. Press the Enter key to change the region. 9 is region free. Timer/Counter functions MAY be lost.
2. 3. 4. 5. Press 3, 8, 3, 8 on the remote control. A menu will appear. Choose which region you want, or use 9 for region free. You can also turn off Macrovision here. Close the tray Teac PLD-1200 1. 2. 3. 4. 5. Open the disc tray. Press 8, 1, 3, 2, 8 on the remote control. Press Enter. Select 9 for region free. Close the tray Technika 108 1. Press the Open to open the drive tray 2. Press the Setup on your remote control 3.
Technika DVD-512 1. 2. 3. 4. 5. 6. Press Setup on the remote control. Press Stop on the front panel of the player. Press Previous on the front panel of the player. Press Next on the front panel of the player. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free. You can also disable Macrovision from this menu. Technika DVD-1010 1. 2. 3. 4. 5. 6. Press Setup on the remote control. Press Stop on the front panel of the player.
6. Select "Region Code". 7. With Up and Down cursor select Region "0" for region free. 8. Exit Setup. Technosonic DVD-202 1. 2. 3. 4. 5. Ensure there is no disc in the player. Press Setup, Setup, Next, Prev, Next, Prev. repeated pressing of Next and Prev may be necessary. You will then see VER followed by number on the top right hand corner of the screen. Using the right arrow key, change the number to 255 for region free. Disble Macrovision 1. Use the steps 1-3 above to get to the VER numbers. 2.
Thomson DTH195 Turn on the player without a disc inside Wait for the menu Using the remote enter the following: 1, 6, 7, 1, 9. Chose region (0 for multi region). Turn the player off! Thomson DPL-900VD 1. 2. 3. 4. 5. 6. 7. Turn player On in DVD mode, with the tray empty. You should see "Reading Disk" as it is starting up. Wait for "No Disk" Message on the screen. Press 2, 6, 8, 6, 2, 2, 0 and 0 on the remote. Press 0 for region free. Message will now shoe "Reading" Insert your disk and begin playing.
1. 2. 3. 4. 5. 6. 7. 8. Turn player On and ensure there is no disc is in the player Press 1 on the remote. Press 6. Press 7. Wait a few seconds until a service menu appears Press 1 for region 1, 2 for region 2 or 0 for region free The player will now show All Press OK. Thomson DTH-460 1. 2. 3. 4. 5. 6. Turn player On and ensure there is no disc is in the player Press 1 on the remote. Press 6. Press 7. Press 0 for region free. Press Stand by.
2. 3. 4. 5. 6. 7. 8. Press 1 on the remote. Press 6. Press 7. Wait a few seconds until a service menu appears Press 1 for region 1, 2 for region 2 or 0 for region free The player will now show All Press OK. Thomson DTH-4008 1. 2. 3. 4. 5. 6. Turn player On and ensure there is no disc is in the player Press 1 on the remote. Press 6. Press 7. Press 0 for region free. Press Stand by. Converting this player to Multi-Region if the above does not work. 1. 2. 3. 4. 5. 6. 7. 8.
1. 2. 3. 4. 5. 6. 7. 8. Turn player On and ensure there is no disc is in the player Press 1 on the remote. Press 6. Press 7. Wait a few seconds until a service menu appears Press 1 for region 1, 2 for region 2 or 0 for region free The player will now show All Press OK. Thomson 24WT2US 1. Open the disc tray. 2. Insert any DVD but do not close the disc tray. 3. Press and hold Eject, FFWD and OK buttons. Note that this may take several attempts to achieve correctly. You will be in region free mode. 4.
Tiny TPSL-102 1. 2. 3. 4. 5. 6. 7. 8. Turn on the player, and ensure the tray is empty. Press 1 on the remote. Press 0. Press +10. Press Prev. Press Next. You will then see the current Region number. Press Prev or Next to change the Region. Beware, this machine will not playback RCE encoded discs.
Toshiba SD210E, Toshiba SD2150, Toshiba SD220E, Toshiba SD2800, Toshiba SD3750 Put DVD ( region 1) into player - wait for regional code violation screen to appear. Once this happens press the M (Memory) button on your remote control. Then press 1 for Title 1 and press play on the remote.
U Umax DVD-6000 1. 2. 3. 4. Press Setup and choose Preferences menu. Press Step, FFwd, FBwd on the remote. Press Pause, Stop, Vol- and you should then be able to select region or use 0 for region free. Press Play to start disc. Umax DVD-6500 1. Press Eject on the Remote Control. 2. Press 7, 7, 7, 7. 3. Press 9 for Region Free (or press required region number). NB: Do not use numbers above 9 for region! 5. Press Eject to exit the menu. Converting this player to Multi-Region: 1.
United DVD-3155 Open the player's tray. Press 3, 3, 0, 8 on the remote. You should see **** on the top left of the screen. Enter 9 for region free, or region number of your choice. You should now see your selected region at the top left of the screen. Press Play. United DVH 3160 Turn the machine on and open up the DVD tray. Using the remote control press 9817 or 3838, and the magic menu appears.
Venturer STS-20-S 1. 2. 3. 4. 5. 6. Open the player tray. Press 8, 1, 3, 2, 8 on your remote. A window will appear on your TV screen. Press Enter to move to region 9 (region free). Press Play to close the tray. The machine is now permanently multi region. Enabling VCD playback: 1. 2. 3. 4. 5. Turn On the player and place a VCD on the open tray Press Close quickly followed by Menu (on the player's front panel). Press 5 on the remote This should load and play the disc.
Press Shuffle. Press Next. Nothing noticeable will happen either. You can check if it worked on a hidden menu: Open, Setup, Shuffle, Step, Next. If the value for 'debug' is 9, it worked. Vieta DVD-Uno Press, OPEN, SETUP, SHUFFLE, STEP, NEXT. Then select the right region Voxon DVD250 1. Press Open/Close on the remote handset NB: Disc tray remains open and TV screen remains the same while pressing the following buttons. 2. Press Clear. 3. Press 1, 3, 6, 9. 4.
Welkin T-123 Switch on. Press "open/close" -leave drawer open. Press "clear" Press 1,3,6,9,0 (where 0 is region 0/multi region) Press "open/close" and close drawer Open drawer insert disc for required region Close drawer May take a couple of attempts and there's no obvious sign that it works other than trying a disc. Wharfedale DVD-750 Open the DVD players tray. Place a Region 1 disc in the tray, but don't close it. Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time.
11. Power off your player. 12. Power on your player. There may be a newer firmware version for this model, for which there is no setups at the current time.
3. 4. 5. 6. 7. Press 1. Press 6. Press 7. You should now see a new menu. Select 0 for region free (or select required region number). XLogic DVD-838J 1. 2. 3. 4. 5. 6. 7. 8. 9. Press Setup on the remote. Press 1. Press 3. Press 6. Press 9. Press Left Arrow three times. Press Right Arrow once. You will see a hidden menu. Select your region and Macrovision preferences.
Code 2 Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: Yamakawa DVD-780, 820, 860 Set Region: SETUP, LOW, SKIP-RIGHT Region Free: Setup, Slow, Skip-links, Pause Yamakawa 713 Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: Yamakawa 715 Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired
Then Setup Then Mute Then Last Then Next Yukai 520 Converting this player to Multi-Region (newer firmware): 1. Empty Tray. 2. Press Setup on Remote. 3. Press Next. 4. Press Prev. 5. Press Next. 6. Press Prev. 7. On Right Upper Corner will be written Ver#. 8. Press Left or Right to get to number 255 (which is for region free - these version numbers correspond to region number). 9. Turn Off and On. Converting this player to Multi-Region (older firmware): 1. Ensure the players tray is empty and closed. 2.
6. Press Prev. 7. On Right Upper Corner will be written Ver#. 8. Press Left or Right to get to number 255 (which is for region free - these version numbers correspond to region number). 9. Turn Off and On. Converting this player to Multi-Region (older firmware): 1. Ensure the players tray is empty and closed. 2. On the Remote control Press Setup. 3. Then On the Players Front Panel. 4. Press Next. 5. Press Stop. 6. Press Pause/Step. 7. Press Prev. 8. Press Next. 9. You should now see a new menu. 10.
9. You should now see a new menu. 10. Go to Select Region and make your choice. Bypass is region free. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press the volume + and - keys alternating until you see "VER #" (# is your current Region code). Use the Cursor keys to choose VER 255 (Region free). Press Setup. Converting the player to Multi-Region if the above fails: 1. 2. 3. 4. Press Setup. Press Next, Prev, Next, Prev. Then you will find the menu. It says 'ver x'.
Z Zenith DVB-312 Enabling (S)VCD Setup: 1. Power on the player with no disk in the drive 2. Press Pause on the Remote. 3. Press 1, 4, 7, 2. 4. At the EEPROM screen write down the code for backup (eg: 55 53 00 45 14 55 64 FF). **Use the left and right arrows on the remote to move **Press the number keys on the remote for number entry **Press and hold numbers 1 thru 6 for letter entry 5a.If you want to enable VCD AND disable Macrovision: Enter: 55 53 00 47 14 55 FE FF OR: 55 53 00 46 14 55 FE FF 5b.
Enabling VCD Setup: 1. Power on the player with no disk in the drive 2. Press Pause on the Remote. 3. Press 1, 4, 7, 2 (the characters 01 47 should appear on the display, if your player is a non UK model, this number will probably be different). 4. Press Arrow Up Three times (the characters 04 Fd should appear on the display). 5. Press Program, 6, Program, 5 (the characters 04 FE should now be displayed). 6. Press Enter (the display should flash briefly). 7. Press Return. 8.
3. You should now be in a hidden setup menu where you can change the region code to 1 for Region 1, 2 for Region 2, and so on, or All for multi-region playback. Converting this player to Multi-Region if the above does not work: 1. When the logo is displayed on the onscreen display, press the Stop button on your remote control. 2. Press 2, 3, 1 and 7, in order, one at a time. 3.
Make you DVD Drive on your Desk Top or Lap Top multiregional. Many DVD’s on computer systems will only allow the user to change the region code a maximum of 5 times before locking the DVD in the region it was last used. This is frustrating to say the least, especially if you work abroad and have the opportunity to view films from different regions (or purchase films on E Bay). Follow these instructions to make the DVD on your desktop or laptop multiregional.
