DVD Video Player 633 DVD 1
Important Note DK S Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Klass 1 laserapparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kann användaren utsättas för laserstrålning, som översjruder gränsen för läserklass 1. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette.
English Index Français English ------------------------------------------------- 5 Deutsch Français ---------------------------------------------- 27 Nederlands Deutsch --------------------------------------------- 49 Nederlands ----------------------------------------- 71 CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BE
General Information The region code for this set is 2. Laser safety Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. This unit employs a laser.
Introduction Access Control Environmental Information ------------------------ 6 Supplied accessories -------------------------------- 6 Safety Information ----------------------------------- 6 Symbols Used in this Manual ---------------------- 6 Access Control: Child Lock ---------------------- 23 Access Control: Parental Control ---------- 23-24 Functional Overview Specifications Specifications --------------------------------------- 25 Front and Rear Panels ------------------------------ 7 Remote C
Introduction English Thank you for purchasing this Philips DVD player. This Owner’s Manual explains the basic operation of this DVD player. Environmental Information All unnecessary packaging has been omitted. Packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.
Functional Overview English Front and Rear Panels B; PLAY/PAUSE – to star t/interrupt playback STANDBY-ON – to switch the player to standby mode or ON 9 STOP – to stop playback / OPEN/CLOSE – to open/close the disc tray Disc Tray DVD633 DVD VIDEO PLAYER OPEN/CLOSE STANDBY-ON STOP PLAY/PAUSE MAINS (AC Power Cord) – connect to a standard AC outlet COAXIAL (Digital audio out) – connect to AUDIO inputs of a digital (coaxial) audio equipment CVBS VIDEO OUT – connect to CVBS Video inputs of a TV TV O
Functional Overview English Remote Control RETURN / RESUME – go back to previous menu / to continue playback after play was stopped DISC MENU – access menu of a DVD disc 1 2 3 4 – (left/right/up/down) select an item in the menu OK – acknowledge menu selection S – search backward* / go to a previous chapter or track STOP ( 9 ) – stop playback PLAY ( B ) – star t playback PAUSE ( ; ) – pause playback temporarily / frame-by-frame playback REPEAT – repeat chapter, track, title, disc POWER B – switch DVD ON o
Basic Connections ● Please refer to the instruction books of your TV, VCR, Stereo System or other devices as necessary to make the best connections. ● Make one of the following connections, depending on the capabilities of your existing equipment. 1 2 The following guidelines are options for the best picture and sound quality available on your DVD player. 1 2 If your TV has a CVBS Video input connector, Connect the CVBS VIDEO OUT on the DVD player to the CVBS VIDEO IN on the TV.
Preparation Inserting batteries into the Remote Control 1 2 If your receiver has a MPEG 2 or Dolby Digital™ decoder, Connect the COAXIAL DIGITAL AUDIO OUT of the DVD player to the COAXIAL DIGITAL AUDIO IN on your receiver. You will need to set the DVD player’s digital output to ALL (see ‘Personal Preferences’). REAR SPEAKERS REAR SPEAKERS RECEIVER with MPEG 2 or Dolby Digital™ decoder 3 Open the battery cover.
Preparation This player is equipped with an NTSC/PAL conversion feature that converts the video output of the disc to match your TV system. To activate the conversion refer to page 13. Switching On 1 2 3 Switch on the TV and DVD player. Set the TV to the correct Video IN channel. (eg. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. (Refer to your TV owner’s manual for detail) ➜ The player display lights up and the default screen appears on the TV. If you are using an external equipment (eg.
Preparation English Personal Preferences – Black level shift (NTSC output only) In the Personal Preferences settings menu, you can customize you player to suit your own particular requirements. Select ON for adapting the colour dynamics to obtain richer contrasts. General operation: 1 2 3 4 5 Press SYSTEM MENU on the remote control. The will be highlighted in the menu bar. Press 4 to activate the Personal Preferences menu.
– TV System (NTSC/PAL Conversion) – Analogue output Allows you to select between PAL, NTSC and AUTO mode depending on your TV. The conversions supported are as follows: Select Stereo, Dolby Surround-compatible or 3D Sound output to match your system’s playback capability. Disc Type 1 2 Format Output format Selected mode PAL NTSC AUTO PAL NTSC NTSC DVD NTSC PAL Not Supported PAL PAL VCD NTSC NTSC PAL NTSC PAL NTSC PAL PAL In the Personal Preferences Menu, select TV System.
Preparation English Language Selecting disc languages: Menu/Audio/Subtitle language ● This is to select the audio language, subtitle language and the language used in TV screen menus or DVD menus which will always be used for every disc to be played back. ● If the language selected is not available on the disc, the default language designated by each disc will be selected. – Bit Rate Indicator Press the DISPLAY key to activate the bit rate indicator.
Basic Playback 1 2 3 4 Press STANDBY ON on the front panel. Press OPEN/CLOSE / on the front panel to open disc loading tray. Place the chosen disc in the tray, with the label facing up. Press OPEN/CLOSE / again to close the tray. ➜ READING appears in the status window and on the player display, and playback starts automatically. Playing a DVD-Video ● DVD video discs may have one or more TITLES, and each TITLE may have one or more CHAPTERS. ● Playback stops at the end of each TITLE.
Operation English Playing a Video CD Playing an Audio CD ● Video CDs may have one or more TRACKS, and TRACKS may have one or more INDEXES. ● To make easy and convenient access, you can move between TRACKS and INDEXES. ● Some Video CDs have Play Back Control (PBC), which is a predefined playback sequence stored on the disc (see Playback Control section). VIDEO CD TRACK 1 INDEX 1 INDEX 2 TRACK 2 INDEX 1 INDEX 2 INDEX 3 ● Audio CDs contain only TRACKS.
Changing the audio language Special DVD Features DVDs may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the 4, 3, 2, 1 keys to highlight your selection in the DVD menu and press OK to confirm. 1 2 Subtitles Title/Disc menu 1 2 3 Press DISC MENU. ➜ If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu will be displayed.
Operation Search English General Features Note: – Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. Moving to another title/chapter DVD VCD 1 2 When a disc has more than one title/track or chapter, you can move to another title/chapter as follows: Press SYSTEM MENU, then select W or X in the menu bar. Press 34 or numerical keys to select a title/ chapter.
Still Picture and Frame-by-frame playback DVD VCD 1 2 3 Select (STEP) in the menu bar and press 4. ➜ Playback will pause. Use the cursor keys 1 2 to select the previous or next picture frame. To exit step by step playback, press PLAY or 3. 1 2 Note: – You can also activate frame-by-frame playback by pressing the PAUSE key repeatedly on the remote control. 3 Scan DVD VCD 1 2 Scanning plays the first 10 seconds of each chapter/track on the disc. Press SCAN.
Operation English FTS Video/Audio Programme Time search DVD VCD 1 2 3 4 The Time Search function allows you to start playing at any chosen time on the disc. Select (TIME SEARCH) in the menu bar and press 4. ➜ Playback will pause. ➜ The elapsed playing time is displayed in a time edit box. Enter hours, minutes and seconds from left to right in the time edit box using remote control numerical key pad. ➜ Each time an item has been entered, the next item will be highlighted.
Operation 2 3 4 5 1 2 3 Erasing a selection in a Programme While playback is stopped, select VIDEO FTS c in the menu bar. Use 4 to select PROGRAM. Use 2 and 1 to select the required number. Press OK to erase the selection. Press SYSTEM MENU to exit. Erasing all selections While playback is stopped, select VIDEO FTS c in the menu bar. Use 4 to select CLEAR ALL and press OK. ➜ All selections will be erased. Press SYSTEM MENU to exit.
Operation English ● ● ● ● ● ● ● ● ● ● MP3 Disc Features Album/Title Support following MP3-CD formats (ISO9660 format): Max. 30 characters Max. nested directory is 8 levels The max. ALB number is 32 Supported VBR bit-rate Supported sampling frequencies for MP3 disc are: 32 kHz, 44.1 kHz, 48 kHz Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192, 256 (kbps) This feature allows you to view and select the next or previous MP3 disc Album/Title. Press 3/4 to scroll through the previous or next Album.
– Each time a ‘child safe’ disc is played, it will be placed on top of the list.When the list is full, the last disc in the list will be replaced when a new disc is added. – Double-sided DVDs and multi-volume VCDs may have a different ID for each side. In order to make the disc ‘child safe’, each side has to be authorised. Child Lock DVD VCD Activating/deactivating the Child Lock 1 2 3 4 5 6 7 When disc playback is stopped, select ACCESS CONTROL in the Personal Preferences menu using the 3/4 keys.
Access Control English Activating/Deactivating Parental Control 1 2 3 4 5 When disc playback is stopped, select ACCESS CONTROL in the Personal Preferences menu using the 3/4 keys. Enter your 4-digit code. If necessary, enter the code a second time. Move to Parental Control using the 3/4 keys. Move to value adjustment (1-8) using the 2 key. Then use the 3/4 keys or the numerical keys on the remote control to select a rating from 1 to 8 for the disc inserted.
PLAYBACK SYSTEM AUDIO PERFORMANCE DVD Video Video CD & SVCD CD (CD-Recordable and CD-Rewritable) MP3 DA Converter DVD CD/Video CD SVCD TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback 625 Multistandard 525 (PAL/NTSC) VIDEO PERFORMANCE Video output RGB (SCART) output Black Level Shift Video Shift 1 Vpp into 75 ohm 0.7 Vpp into 75 ohm On/Off Left/Right AUDIO FORMAT Digital MPEG Compressed Digital 16, 20, 24 bits fs, 44.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair.
