DVD Video Player Read this manual first! Congratulations on purchasing this Philips product. We’ve included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: • Hookups, • First Time Setup, and • Feature Operation.
Important Note DK S Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Klass 1 laserapparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kann användaren utsättas för laserstrålning, som översjruder gränsen för läserklass 1. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette.
English Index Français English ------------------------------------------------- 5 Deutsch Français ---------------------------------------------- 25 Nederlands Deutsch --------------------------------------------- 45 Español ---------------------------------------------- 85 Italiano CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
General Information The region code for this set is 2. Laser safety Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded. This unit employs a laser.
Introduction Setup Menu Environmental Information ------------------------ 6 Supplied accessories -------------------------------- 6 Safety Information ----------------------------------- 6 Symbols Used in this Manual ---------------------- 6 Before Getting Started ----------------------------- 7 Basic Operations ---------------------------------- 18 General Setup ---------------------------------- 18-19 TV Display ------------------------------------------ 18 PIC mode -----------------------------------
Introduction English Thank you for purchasing this Philips DVD player. This Owner’s Manual explains the basic operation of this DVD player. Environmental Information All unnecessary packaging has been omitted. Packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.
Introduction English Before Getting Started 1 Stand to support the DVD player DVD player TV OUT S-VIDE O 12V VIDEO COAX IAL OPTIC AL FL FR SL Cente r Multi-5 .1 SR Sub-W oofer 2 3 TV OUT 12V S-VIDEO VIDEO COAXIAL OPTICAL FR FL SL Cente r Multi-5 .1 SR Sub-W oofer You can place your DVD player in two positions as the following: Horizontal Position 1 2 Place the DVD player on the DVD stand in horizontal position.
Functional Overview 9 STOP – to stop playback English Front and Rear Panels S PREV – goes to previous chapter or track STANDBY – light appears when power is in Standby mode T NEXT – goes to next chapter or track Disc Tray – inser t a disc here Display – message about current DVD player operations POWER – press to turn the power on or off 2; PLAY/PAUSE – to star t or interrupt playback / EJECT – to reload or to eject the disc IR Sensor – receive signals from remote control MULTICHANNEL 5.
Functional Overview PBC ON/OFF – to switch on or off PBC mode VIDEO SYS – to select between MULIT/ NTSC/PAL system DISPLAY – to display time information during playback DVD B – switch DVD ON or go to standby-on mode 0 to +10 numerical key pad – select numbered items in a menu 1 2 3 4 – (left/right/up/down) select an item in the menu OK – acknowledge menu selection SLOW REV – to go backward in slow motion PREV ( ¡ ) – go to previous chapter or track NEXT ( ™ ) – go to next chapter or track SLOW FWD – to go
Preparation English Remote control (Speaker) Basic Connections ● Please refer to the instruction books of your TV, VCR, Stereo System or other devices as necessary to make the best connections. ● Make one of the following connections, depending on the capabilities of your existing equipment. The following guidelines are options for the best picture and sound quality available on your DVD player.
Connecting to a TV 1 Connecting to an Audio System Connect the SCART (TV OUT) on the DVD player to the corresponding connector on the TV. Note: – Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to the DVD player. 1 2 You can also listen to the sound of audio CDs and DVD video discs by connecting to an optional stereo system.
Preparation English Connecting to Philips Speaker System ● Connect the MULTI 5.1 channel output on the DVD player to the dedicated Philips Speaker system (cable supplied with the speaker system). ● This device is equipped with a multichannel decoder and permits playback of DVDs recorded in the multichannel sound process. ● To activate the 6-channel mode: select the system menu and in SPEAKER SETTINGS set the option DOWNMIX at OFF.
Connecting to a Multi-channel Audio/(Video) receiver with 6 connectors ● This player contains a multi-channel decoder and it enables playback of DVDs recorded in Multichannel. 1 2 3 4 5 Connect the audio Left and Right outputs for Front speaker connection (1) to the corresponding input sockets on your receiver using the audio cable supplied. Connect the audio Left and Right outputs for Surround speaker connection (2) to the corresponding inputs on your receiver using an optional audio cable.
Preparation English NTSC/PAL Conversion Switching On ● This player is equipped with an NTSC/PAL conversion feature that converts the video output of the disc to match your TV system. ● Allows you to select between PAL, NTSC and MULTI mode.
Basic Playback 1 2 3 4 Press POWER on the front panel to turn on the DVD player. Insert the chosen disc in the tray, with the label facing up. Disc playback starts automatically or press PLAY to start playback depending on the disc menu on the TV screen. Press EJECT to eject or reload the disc. 1 2 1 2 1 2 Notes: – DVDs may have a region code.Your player will not play discs that have a region code different from the region code of your player.
Operation English Repeat Display DVD VCD DVD Repeat chapter/title/disc ● To repeat the current chapter, press REPEAT. ● To repeat the current title, press REPEAT a second time. ● To exit Repeat mode, press REPEAT a third time. Information about the disc will be display by pressing the DISPLAY button on the remote control during disc playback. DVD disc: TITLE CHAPTER NUMBER 1 2 3 / TIME ELAPSED TITLE REMAIN CHAPTER ELAPSED VCD CD Repeat track/disc ● To repeat the current track, press REPEAT.
Disc Menu Camera Angle DVD DVD 1 2 3 Press DISC MENU key to display the chapters available on the DVD disc. Use the 1 2 3 4 keys to move to the required title and OK to confirm. You can also enter the numerical key pad to play the selected chapter. 3 The Zoom function allows you to enlarge the video image and to pan through the enlarged image. Press ZOOM key on the remote control. Select the required zoom factor: 1.5 or 2 or 4 or OFF using 1 2 3 4 keys to pan across the screen.
Setup Menu English 1 2 3 4 Basic Operations TV Display Press SYSTEM MENU to enter the Setup menu. ➜ Setup menu appears on the TV screen. Use the 1 2 3 4 keys to toggle through the functions and select your preferred option. Press OK to confirm a highlighted selection. Press SYSTEM MENU again or move 4 key to EXIT SETUP MENU on the screen and press OK to quit. Select the aspect ratio of the TV to be connected. 16:9 (WIDE) ➜ when you connect a widescreen TV to the DVD player.
Angle Mark Channel setup ON: Current angle setting will be display on the right hand side of the screen. OFF: Disable the current angle setting display. This menu contains setup options for your speaker system to reproduce high quality surround sound. OSD Lang English Setup Menu - - CHANNEL SETUP PAGE - - There are seven options available for information display on the TV screen. ENGLISH: OSD information will be displayed in English. FRENCH: OSD information will be displayed in Français and etc.
Setup Menu Dynamic English Audio Setup --- AUDIO SETUP --AUDIO AUDIO OUT OUT DUAL MONO LPCM OUTPUT DYNAMIC ANALOG SPDIF(RAW) SPDIF(PCM) MAIN PAGE To optimised the dynamic sound output. High volume outputs are softened, enabling you to watch your favourite action movie without disturbing others. The levels for dynamic selection: 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, 8/8 and OFF.
Audio / Subtitle / Disc menu Password DVD discs are available for multi-audio / subtitle / disc menu languages. Use these settings to choose your preferred default language. Audio: English, French, Spanish, Chinese, ...etc. Subtitle: English, French, Spanish, Chinese, ... etc. Disc menu: English, French, Spanish, Chinese, ... etc. You can change the setup of parental setting with a recognise password. Enter your password when required by the DVD player. Enter the current 4 digit code.
JPEG Picture and MP3 Playback Notes: – The disc reading time may exceed 10 seconds due to the large number of songs compiled onto one disc. – Playback of multi-session disc is supported for the first 10 sessions with the same format. – For multi-session discs with different formats, only the first session will be available. English This DVD player can playback JPEG format pictures and MP3 files. --- SMART NAVI --ROOT PLAY MODE 1 2 3 4 ROOT ALEX TO 99P MP3 BACK KAREN HX AILFE.
PLAYBACK SYSTEM AUDIO PERFORMANCE DVD Video Video CD & SVCD CD (CD-Recordable and CD-Rewritable) MP3 CD DA Converter 24 bits DVD fs 96 kHz DVD/SVCD fs 48 kHz SVCD/VCD/CD fs 44.1 kHz Signal-Noise (1kHz) Dynamic Range (1kHz) Crosstalk (1kHz) Distortion and Noise (1kHz) MPEG MP3 MPEG Audio L3 TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback 625 Multistandard 525 (PAL/NTSC) VIDEO PERFORMANCE Video output S-Video output RGB (SCART) output 1 Vpp into 75 ohm Y: 1 Vpp into 75 ohm C: 0.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair.
