Download

23
English
EN
[Audio Sync]: Set audio delay if audio and video
cannot be matched.
[Sound Mode]: Turn off or select your preferred
sound mode.
• [Original] (original)
• [Movie Mode]
• [Music Mode]
• [Gaming] (gaming)
• [News] (news)
[Night Mode]: Make loud sound level softer
and soft sound level louder so that you can
watch the DVD movies at a low volume,
without disturbing others.
• [On]-enjoyquietviewingatnight(DVDs
only).
• [Off]- enjoy surround sound with its full
dynamic range.
Preferences
On the [Preference] page, you can set the
following options:
[Audio]: Select the preferred audio language for
disc play.
[Subtitle]: Select the preferred subtitle language
for disc play.
[Disc Menu]: Select the preferred disc menu
language.
Note
• If the language you have set is not available on the disc,
the disc uses its own default language.
• For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental Control]: Restrict access to discs that
are unsuitable for children. These types of discs
must be recorded with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
• Rated discs above the level you set in [Parental
Control]requireapasswordtobeplayed.
• The ratings are country-dependent. To allow all discs to
play, select [8 Adult].
• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC]: Play VCD interactively according to the
menu screen.
• [On]- the menu screen is displayed.
• [Off]- normal play is resumed.
[Password]: This setting allows you to change
the password for parental control. The default
password is 000000.
1) Press the numeric keys to enter '000000'
or your last set password at [Old
Password]eld.
2) Enter the new password at [New
Password]eld.
3) Enter the new password again at [Conrm
PWD]eld.
4) Press OK to exit the menu.
Note
• If you forget the password, enter '000000' before you
set a new password.
[DivX Subtitle]: Select a character set that
supports the DivX subtitle.
Note
• Ensurethatthesubtitlelehastheexactsamele
nameasthemoviele.Ifforexamplethelenameof
the movie is ‘Movie.avi’, and then you will need to name
thetextle‘Movie.sub’or‘Movie.srt’.
[Version Info]: Display the software version of
this device.
[Default]: Reset all the settings to factory
default, except for the password and parental
settings.