762 DVD-752 DVD- DVD Video Player 1
Important Note DK S Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Klass 1 laserapparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kann användaren utsättas för laserstrålning, som översjruder gränsen för läserklass 1. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette.
General Information The region code for this set is 2. 2 Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded. NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES.
Contents Introduction Philips DVD Video Introduction ------------------------- 5 Unpacking ---------------------------------------------------- 5 Remote Control Battery Installation ------------------- 5 Environmental Information ------------------------------- 5 Safety Information ------------------------------------------ 5 Cleaning Discs ---------------------------------------------- 5 Functional Overview Front and Rear Panels ------------------------------------- 6 Remote Control ----------------------
Introduction Philips DVD Video Introduction ¶ Insert batteries as indicated inside the battery compartment. Caution: Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.) You will recognise DVD Video discs by the logo shown. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more Titles.
Functional Overview Front and Rear Panels T NEXT – goes to next chapter or track STANDBY-ON – switches the player to Standby mode or ON B PLAY – star ts playback DISPLAY – shows the current status of the player SOUND – selects Stereo, Dolby Surround 3D Sound (TruSurround) or multichannel DVD/VIDEO CD/CD PLAYER STANDBY-ON SOUND PLAY PREV OPEN / CLOSE NEXT PAUSE STOP by ; PAUSE – interrupts playback / OPEN/CLOSE – opens/closes the disc tray S PREV – goes to previous chapter or track Disc Tray
Remote Control RETURN / RESUME – go back to previous menu / to continue playback after play was stopped DISC MENU – access menu of a DVD disc 1 2 3 4 – (left/right/up/down) select an item in the menu OK – acknowledge menu selection S – search backward* / go to a previous chapter or track STOP ( 9 ) – stops playback PLAY ( B ) – star ts playback PAUSE ( ; ) – pause playback temporarily / frame-by-frame playback REPEAT – repeat chapter, track, title, disc POWER B – switches DVD ON or to standby-on mode 0-9
Preparation General Notes ¶ ¶ ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the player’s audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See ‘Connecting to Optional Equipment’.
Digital Multi-channel sound Digital multi-channel connection provides the best sound quality. For this you need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital™ and DTS). Check the receiver manual and the logos on the front of the receiver. Analog connection to a multi-channel A/V receiver with 6 Channel connectors (Dolby Digital / DTS) This DVD player contains a multi-channel decoder.
NTSC/PAL Settings General Explanation You can switch the NTSC/PAL setting of the DVD player to match the video signal of your TV. This setting only affects the television’s on-screen display that shows the stop and setup modes. You may select either NTSC or PAL. To change the DVD player setting to PAL or NTSC, follow the steps below. About this manual This manual gives the basic instructions for operating the DVD player.
Initial Setup (Virgin Mode) General In ‘Initial Setup’ you may have to set your preferences for some of the player’s features. (not applicable for all models) Operation After switching on the player for the very first time, the ‘Initial Setup Screen’ will appear. The menu for the first item to be set is displayed and the first option is highlighted. ¶ ¶ Use the 4 3 keys to go through the options in the menu. The icon of the selected option will be highlighted.
Temporary Feedback Field Icons Picture – TV Shape See ‘Initial Setup’ Scan Repeat All Repeat Title – Black level shift (NTSC only) Select ON for adapting the colour dynamics to obtain richer contrasts. Repeat Track Repeat Chapter Shuffle Shuffle Repeat Repeat A to end – Video shift Repeat A-B The factory centres the video on your screen. Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right.
Sound – Karaoke vocal – Digital output Put this setting to ON only when a multi-channel karaoke DVD is being played. The karaoke channels on the disc will then be mixed into a normal stereo sound. Factory setting: ALL. This means coaxial and optical output is on. If you are not connecting to equipment with a digital input, change the setting to OFF. If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM (Pulse Code Modulation).
Operation Loading Discs General Features Note: – Unless stated, all operations described are based on remote control operation. A number of operations can also be carried out via the menu bar on the screen. 1 Press OPEN/CLOSE on the front of the player to open disc tray. 2 Load your chosen disc in the tray, label side up. 3 Press OPEN/CLOSE again, to close the tray. ➜ READ appears in the status window and on the player display, and playback starts automatically.
¶ ¶ ¶ ¶ ¶ ¶ ¶ Repeat Time search DVD Video Discs Repeat chapter/title/disc To repeat the current chapter, press REPEAT. ➜ REPEAT CHPT appears on the player display. To repeat the current title, press REPEAT a second time. ➜ REPEAT TITL appears on the display. To repeat the entire disc, press REPEAT a third time. ➜ REPEAT appears on the display. To exit Repeat mode, press REPEAT a fourth time. The Time Search function allows you to start playing at any chosen time on the disc.
Special DVD Features FTS-Video ¶ ¶ ¶ ¶ The FTS-Video function allows you to store your favourite titles and chapters (DVD) and favourite tracks and indexes (VCD) for a particular disc in the player memory. FTS program can contain 20 items (titles, chapters etc.). A programmed FTS will be placed on top of the list when playback is activated. When the list is full, a new program will replace the last program on the list. The programme can be selected and played at any time.
Special VCD & SVCD Features Playback Control (PBC) ¶ ¶ ¶ ¶ ¶ Load a Video CD with PBC and press B. Go through the menu with the keys indicated on the TV screen until your chosen passage starts to playback. If a PBC menu consists of a list of titles, you can select a title directly. Enter your choice with the numerical keys (0-9). Press RETURN to go back to the previous menu. You may also select PBC OFF under Personal Preferences.
Downloading MP3 files from the Internet or copying songs from your own legal discs is a delicate process. Storing an FTS Programme 1 Load a disc and stop playback. 2 Use 4 to go to the list of available tracks. 3 Use 2 or 1 to select tracks from the list. 4 To go directly to any track, enter the track number using the numerical keys (0-9). Store each track by pressing OK. ➜ The track numbers will be added to the list.
Access Control Access Control; Child Lock (DVD Video and Video CD) Activating/deactivating the child lock 1 When disc playback is stopped, select ACCESS 2 3 4 5 6 7 8 CONTROL in the features menu using the 3/4 keys. Enter a 4-digit code of your own choice. Enter the code a second time. Move to “CHILD LOCK” using the 3/4 keys. Move to LOCK/UNLOCK using the 2 key. Select LOCK using the 3/4 keys. Press OK or 1 to confirm, then press 1 again to exit the menu.
Activating/Deactivating Parental Control 1 When disc playback is stopped, select ACCESS 2 3 4 5 CONTROL in the features menu using the 3/4 keys. Enter your 4-digit code. If necessary, enter the code a second time. Move to Parental Control using the 3/4 keys. Move to VALUE ADJUSTMENT (1-8) using the 2 key. Then use the 3/4 keys or the numerical keys on the remote control to select a rating from 1 to 8 for the disc inserted. Rating 0 (displayed as ‘– –’): Parental Control is not activated.
Before Requesting Service If it appears that the DVD Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty. Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). Symptom Remedy No power – Make sure the power cord is properly connected. – Check if there is power at the AC outlet by plugging in another appliance.
Appendix Speaker Settings Delay times 6 Channel settings Front speaker L (Large): When the front speakers can reproduce low frequency signals below 120Hz S (Small): When the front speakers cannot produce low frequency signals below 120Hz The DVD player is set to reproduce correctly synchronized Digital Surround Sound in a listening area where the surround speakers are about 150cm nearer to the listening position than the front speakers, and the center speaker is in line with the front speakers.
Specification PLAYBACK SYSTEM DVD Video Video CD & SVCD CD (CD-R and CD-RW) DVD+RW MP3 OPTICAL READOUT SYSTEM Lasertype Semiconductor AlGaAs Numerical Aperture 0.60 (DVD) 0.45 (VCD/CD) Wavelength 650 nm (DVD) 780 nm (VCD/CD) DVD DISC FORMAT Medium Diameter Playing time (12cm) VIDEO FORMAT DA Converter Signal handling Digital Compression Optical Disc 12cm (8cm) One layer Dual layer Two side Single layer Two side Dual layer CABINET Dimensions (w x h x d) Weight 2.15 h* 4 h* 4.
