622 DVD-612 DVD- DVD Video Player 1
Important Note DK S Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Klass 1 laserapparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kann användaren utsättas för laserstrålning, som översjruder gränsen för läserklass 1. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette.
English Index Français English -------------------------------------------------------- 5 Deutsch Français ------------------------------------------------------ 23 Nederlands Deutsch ----------------------------------------------------- 41 S ve n s k a Nederlands ------------------------------------------------- 59 Dansk Svenska ------------------------------------------------------ 77 Suomi Dansk -------------------------------------------------------- 95 Norge Suomi -----------------------
General Information The region code for this set is 2. 2 Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded. NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES.
Contents English Introduction Philips DVD-Video Introduction ------------------------- 6 Unpacking ---------------------------------------------------- 6 Remote Control Battery Installation ------------------- 6 Environmental Information ------------------------------- 6 Safety Information ------------------------------------------ 6 Cleaning Discs ---------------------------------------------- 6 Functional Overview Front and Rear Panels ------------------------------------- 7 Remote Control -------------
Introduction ¶ Insert batteries as indicated inside the battery compartment. Caution: Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.) DVD-Video You will recognise DVD-Video discs by the logo shown. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more Titles. + + Your Philips DVD-Video player will playback digital video discs conforming to the universal DVD-Video standard.
Functional Overview STANDBY-ON – switches the player to Standby mode or ON English Front and Rear Panels ; PAUSE – to interrupt playback DISPLAY – shows the current status of the player B PLAY – to star t playback 9 STOP – to stop playback DVD622 S PREV – go to previous chapter or track / OPEN/CLOSE – opens/closes the disc tray SOUND – selects Stereo, Dolby Surround or 3D Sound (TruSurround) Disc Tray T NEXT – go to next chapter or track TV OUT (TV) – connect to TV with SCART MAINS (AC Power) –
English Remote Control RETURN / RESUME – go back to previous menu / to continue playback after play was stop DISC MENU – access menu of a DVD disc 1 2 3 4 – (left/right/up/down) to select an item in the menu OK – acknowledge menu selection S – search backward* / go to a previous chapter or track STOP ( 9 ) – to stop playback PLAY ( B ) – to star t playback PAUSE ( ; ) – pause playback temporarily / frame-by-frame playback REPEAT – repeat chapter, track, title, disc REPEAT (A-B) – repeat a specific segmen
Preparation ¶ ¶ ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the player’s audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See ‘Connecting to optional equipment’.
English Note: – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. – Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. – To see the selected audio format of the current DVD in the Status Window, press SYSTEM MENU or Audio.
General In ‘Initial Setup’ you may have to set your preferences for some of the player’s features. (not applicable for all models) Operation After switching on the player for the very first time, the ‘Initial Setup Screen’ will appear. The menu for the first item to be set is displayed and the first option is highlighted. ¶ ¶ Use the 4 3 keys to go through the options in the menu. The icon of the selected option will be highlighted. Use OK to confirm your selection and to go to the next menu.
English Temporary Feedback Field Icons Picture – TV Shape See ‘Initial Setup’ Scan Repeat All Repeat Title – Black level shift (NTSC only) Select ON for adapting the colour dynamics to obtain richer contrasts. Repeat Track Repeat Chapter Shuffle Shuffle Repeat Repeat A to end Repeat A-B Angle – Video shift The factory centres the video on your screen. Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right.
Features – Digital output – Access Control Factory setting: ALL. This means coaxial output is on. If you are not connecting equipment with a digital input, change the setting to OFF. If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM (Pulse Code Modulation). Access Control contains the following features: Child Lock - When Child Lock is set to ON, a 4-digit code needs to be entered in order to playback discs.
Operation English Loading Discs General features Note: – Unless stated, all operations described are based on remote control operation. A number of operations can also be carried out via the menu bar on the screen. 1 Press OPEN/CLOSE on the front of the player to open disc tray. 2 Load your chosen disc in the tray, label side up. 3 Press OPEN/CLOSE again, to close the tray. ➜ READ appears in the status window and on the player display, and playback starts automatically.
¶ ¶ ¶ ¶ Time search Select (FAST MOTION) in the menu bar. Use the 4 keys to enter the FAST MOTION menu. Use the 1 2 keys to select the required speed: -32, -8 or -4 (backward), or +4, +8, +32 (forward). Select 1 to play the disc at normal speed again. To exit FAST MOTION mode, press B or 3. The Time Search function allows you to start playing at any chosen time on the disc. Select (TIME SEARCH) in the menu bar. Press 4. ➜ The player will now go into PAUSE mode.
English Special DVD features FTS-Video ¶ ¶ ¶ ¶ The FTS-Video function allows you to store your favourite titles and chapters (DVD) and favourite tracks and indexes (VCD) for a particular disc in the player memory. FTS programme can contain 20 items (titles, chapters). An programmed FTS will be placed on top of the list when playback is activated. When the list is full, a new programme will replace the last programme on the list. The programme can be selected and played at any time.
Playback Control (PBC) ¶ ¶ ¶ ¶ ¶ Load a Video CD with PBC and press B. Go through the menu with the keys indicated on the TV screen until your chosen passage starts to playback. If a PBC menu consists of a list of titles, you can select a title directly. Enter your choice with the numerical keys (0-9). Press RETURN to go back to the previous menu. You may also set to PBC OFF under Personal Preferences. Playing an audio CD ¶ ¶ ¶ ¶ ¶ ¶ After loading the disc, playback starts automatically.
English Downloading MP3 files from the Internet or ripping songs from your own legal discs, is a delicate process. Storing an FTS Programme 1 Load a disc and stop playback. 2 Use 4 to go to the list of available tracks. 3 Use 2 or 1 to select tracks from the list. 4 To go directly to any track, enter the track number using the numerical keys (0-9). Store each track by pressing OK. ➜ The track numbers will be added to the list.
Access Control English Access Control; Child Lock (DVD-Video and Video CD) Activating/deactivating the child lock 1 When disc playback is stopped, select ACCESS 2 3 4 5 6 7 8 CONTROL in the features menu using the 3/4 keys. Enter a 4-digit code of your own choice. Enter the code a second time. Move to “CHILD LOCK” using the 3/4 keys. Move to LOCK/UNLOCK using the 2 key. Select LOCK using the 3/4 keys. Press OK or 1 to confirm, then press 1 again to exit the menu.
English Activating/Deactivating Parental Control 1 When disc playback is stopped, select ACCESS 2 3 4 5 CONTROL in the features menu using the 3/4 keys. Enter your 4-digit code. If necessary, enter the code a second time. Move to Parental Control using the 3/4 keys. Move to VALUE ADJUSTMENT (1-8) using the 2 key. Then use the 3/4 keys or the numerical keys on the remote control to select a rating from 1 to 8 for the disc inserted. Rating 0 (displayed as ‘– –’): Parental Control is not activated.
Before Requesting Service English If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty. Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). Symptom Remedy No power – Make sure the mains cord (AC Power) is properly connected.
Specification English PLAYBACK SYSTEM DVD-Video Video CD & SVCD CD (CD-R and CD-RW) DVD+RW MP3 (DVD622 only) CONNECTIONS SCART Video Output Audio L+R output Digital Output OPTICAL READOUT SYSTEM Lasertype Semiconductor AlGaAs Numerical Aperture 0.60 (DVD) 0.