Digital receiver Terrestrial DTR3202 User manual
Congratulations! This High Definition Digital Television Receiver (DTR) is an innovative product dedicated to Digital Terrestrial Television. Equipped with a silent hard disk drive, it allows easy reception and recording of digital programmes, including those broadcasted in High Definition. The Philips recorder follows a continuous development strategy. Therefore, we reserve the right to make changes and improvements to the product described in this user manual without any prior notice.
Contents 1 Safety recommendations Where to put your Set-top box? Warnings and safety instructions Batteries Interference USB Storage devices Cleaning the Set-top box 2 What‘s in the box 12 Timeshift/Record 4 4 4 5 5 5 5 6 Front panel of the Set-top box Rear panel of the Set-top box Overview of the remote control 7 7 8 3 Connecting your devices 9 Connection to the terrestrial antenna Connection to the TV set Connection to a Home cinema system 4 Before starting Basics of the menu system Menu tree 5
1 Safety recommendations Use of the Set-top box is subject to safety measures designed to protect users and their environment. Where to put your Set-top box? In order to guarantee the correct operation of your Set-top box, you must: place it indoors to protect it from lightning, rain, and direct sunlight, place it in a dry and well ventilated area, keep it away from heat sources such as radiators, candles, lamps,etc.
Always keep the power cord unit out of the reach of children or domestic animals. Only personnel approved by the manufacturer can repair the Set-top box. Failure to comply with these safety precautions will invalidate the guarantee. Have a specialised installer perform all connections if you want to use cables that are not provided with the Set-top box. Batteries Batteries are easily swallowed by young children. Do not allow young children to play with the remote control.
2 What‘s in the box Your new equipment includes: High Definition Digital Television Recorder (DTR) Safety condition 6 Remote control with 2 batteries (AAA) Quick start guide warranty card
Front panel of the Set-top box 1 1 2 3 Digital display 4 5 6 7 8 4 Antenna input Shows the current time when the Set-top box is in standby. 5 Antenna output (Loopthrough only) Shows the programme number when the Set-top box is on. 6 LAN connector Shows hard disk activity(recording in progress,programme playback,...
6 Overview of the remote control EPG • Display the Electronic Program Guide • Move in a page,a menu...
3 Connecting your devices Before installing your Set-top box: • Please check that the delivery is complete (see What‘s in the box, page 6). • Please ensure that the appliances to be connected together (recorder, TV set, VCR/DVD…) are unplugged before making any connections. • Please ensure that Digital Terrestrial Television (DTT) is available in your area.
Connection to a Home cinema system Some programmes are broadcast with a high quality multichannel digital sound. The connection of your Set-top box to a Home cinema system will give you a cinematic surround sound experience when watching these programmes.
4 Before starting Basics of the menu system How to access the main menu? Press the key. How to access a feature? You can access some features using the remote control as well as the main menu. When both possibilities are available, the corresponding procedures are proposed.
Menu tree The tree below introduces the Set-top box menus: Edit Channel Installation TV Channel List Radio Channel List Delete All Auto Scan Channel Scan LCN System Setup Language TV System Language Primary audio Secondary audio Subtitle Language Teletext Subtitle Video Resolution Aspect Mode Digital Audio Out Local Time Setting Region GMT Usage GMT Offset Summer Date Time Timer Setting Timer Mode Timer Service Wakeup Channel Wakeup Date On time Duration Parental Lock Menu Lock Rating Lock New
Tools Information Load Factory Setting Software upgrade by OTA Software upgrade by USB Remove USB device safely Network Network setting Network application Media Player Records Video Music Image HDD Information DVR Setting Game Othello Sudoku 13
5 Getting Started Channel Scan 1 Select "Channel Scan", press the "OK" button to enter the Channel Scan menu. 2 Press cursor button to set Scan mode, Scan Band ,Channel No., Frequency and Bandwidth, then highlight "Search", press "OK" button to start channel scan . Welcome If you use the Set-top box for the first time, the "Welcome" menu appears. Press cursor button to setup the Region, Language, Display Mode and Aspect Mode. Highlight "OK" and press the "OK" button to start Auto Scan channel.
6 Operation Edit Channel Accessing the Electronic Program Guide (EPG) Accessing the EPG of all channels: 1 2 Press "EPG" button to enter EPG menu . Edit Channel menu 1 Press the "MENU" button to enter main menu. 2 Press "UP" or "DOWN " button to highlight "Edit Channel", 3 press "RIGHT" button to enter the Edit Channel menu. 4 Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK" button to enter the sub-menu . Press "EXIT" button to exit.
Edit Channel All TV Sort Rename Delete 0009 TMF 0010 The HITS 0011 Film4 0012 BBC THREE 0013 BBC NEWS DVBT Film4 538000/8K/64QAM PID:701/702/701 GI:1/32 FEC:7/8 0014 BBC TWO 0015 BBC ONE Radio Channel List 1 In the Edit Channel menu, select "Radio Channel List", press "OK" button to enter the Radio Channel list menu. 2 Press "UP" or "DOWN" button to highlight channel press the "OK" button to listen the desired Radio channel.
7 System Setup TV System Video Resolution System setup menu 720p@50HZ Aspect Mode System setup menu allows you to set Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Favorite, Audio Description Setting, Multiview Setting and Other. Auto Digital Audio Output LPCM Out 1 Press the "MENU" button to enter main menu. 2 Press "UP" or "DOWN" button to highlight "System Setup", 3 press "RIGHT" button to enter the System Setup menu.
Timer Setting OSD Setting 15:21 28-11-2015 1 2 Timer Mode Timer Service 3 OSD Timeout OSD Transparency Off 3 Off Channel Wakeup Channel Film4 4 Wakeup Date 5 On Time 18:20 6 Duration 02:00 15:21 28-11-2015 7 Save 8 Cancel Favourite Parental Control This menu allows you to rename the favorite group. This menu allows you to restrict access to some menus and channels. 1 In Channel menu, select "Favorite", press "OK" button to enter Favourite menu.
Multiview Setting Other This menu allows us to set Multiview This menu allows you to set Antenna Power, Channel Play Type, Beeper and Auto Standby. 1 In "System Setup" menu, select "Multiview Setting" and press "OK" button, you can set your desired screen view to 4+1 Pictures or 3x3 Pictures . 2 After you set your screen view, press "EXIT" button to exit the main menu,then press "BLUE" button to enter multiview.
3 8 Tools Press "EXIT" button to exit . Factory Setting Tools main menu This operation will load default settings and erase all Use this menu, you can see the current informations of this Set Top Box,Load Factory Setting, Update S/W and Remove USB device safely. 1 2 Press the "MENU" button to enter main menu. 3 Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK" button to enter the sub-menu. existing channels.
9 Network Network menu This menu allows you to watch the weather forecast, and listen to the Net Radio.
Music: 10 Media Player Media Player main menu Media Player menu allows you to play musics, videos , pictures and native recorded files from USB disk. 1 2 Press the "MENU" button to enter main menu. 3 Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK"button to enter the sub-menu. Press "UP"or "DOWN" button to highlight "Midia Player", press "RIGHT" button to enter the Midia Player menu. 4 Press "EXIT" button to exit. "RED" button: Press "RED" button to show Play List.
HDD Information HDD Information This menu can display storage state of HDD. 1 In "Media Player" menu, select "HDD Information", press "OK" button to open PVR Storage information window. 2 Press "EXIT" button to exit. . Format USB Disk A:3.75G bytes DVR Set DVR Type FAT/NTFS Volume Total Size: Free Size: Rec Size: TMS Size: File System: "YELLOW" button: Press YELLOW button to open Disk Mode menu. "LEFT" or "RIGHT" Press "LEFT" or "RIGHT" cursor button to button: change Disk Mode.
11 Game Game menu This menu allows you to play games by the function. 1 2 Press the "MENU" button to enter main menu. 3 Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK" button to enter the game. Press "UP" or "DOWN" button to highlight "Game", press "RIGHT" button to enter the Game menu. 4 Press "EXIT" button to exit.
12 Timeshift/Record Start Timeshift Plugging an external Mass Storage Device on the USB port gives you access to Time Shift/Record a broadcast programme. Pause a broadcast programme and continue watching it later (Time Shift ) 1 Ensure Timeshift is actived, in channel mode, press the“Pause” button to switch to Timeshift mode. 2 Press "RIGHT" or "LEFT" button to move the cursor to the time you desired to view. 3 Press "OK" button to enter the Timeshift playback. Record a broadcast programme.
13 Environment Preservation of the environment is an essential concern of Philips. The desire of Philips is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination. Meaning of logos present on the product or its packaging European regulations require packaging to be recycled. It must not be discarded with unsorted waste.
14 Troubleshooting Using the Set-top box Problem Solution What to do Standby light not lit Mains lead unplugged Check mains lead No signal found Aerial is disconnected Check aerial lead Aerial is damaged/misaligned Check aerial Out of digital signal area Check with dealer No picture or sound Scart/AV is not selected on your TV Reduce to another channel Scrambled channel message Channel is scrambled Select the right input on your TV No response to remote control Set-top box power off Plu
15 Customer Support At Philips we believe that a high quality product should come with the highest quality customer service. In the design of this product we have taken great care to ensure the maximum quality possible and are sure that you will be delighted with your purchase. However, in the rare event that you have any problems with the product and need advice or support you can be confident that wewill do our best to help you.
16 Specifications Multichannel 5.
Power supply Mains supply voltage: 220-240 V~ 50 Hz Max. Power consumption: < 12 W Standby consumption: < 1 W Physical Specifications Set-top box Size (wxdxh): 148x110x35 mm Weight: 0.27Kg Operating temperature: 0°C to +40° Storage temperature: -25°C to +65°C Accessories 1 x Remote control 2 x AAA batteries 1 x Safety condition 1 x Quick start guide 1 x Warranty card Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by X-GEM SAS, further referred to in this document as X-GEM SAS, and is the manufacturer of the product. 2015 © X-GEM SAS. All rights reserved Headquarters: X-GEM SAS 9 rue de la Négresse 64200 Biarritz – FRANCE Tel : +33 (0)5 59 41 53 10 Fax : + 33 (0)5 59 41 53 09 www.xgem.
