NOTICE DTR 320_290405.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 2 Welcome to digital television English Congratulations on choosing the PHILIPS DTR 320 digital terrestrial receiver, which will allow you to access Freeview digital terrestrial television, radio and interactive channels.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 3 Unpack your receiver and check that the following cables and accessories are also included in the package: - 1 remote control - 2 batteries (2 x LR6 AA 1.5 V) - 1 SCART lead - 1 RF coaxial lead - 1 mains cord - 1 user manual - 1 Worldwide Warranty booklet Plastic bags can be dangerous.To avoid suffocation keep the bags away from babies and children. Quick installation Please read the safety section before connecting your receiver.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 4 TABLE OF CONTENTS English Welcome to digital television 2 4.6 Changing the Subtitle selection Meaning of symbols 2 4.7 Changing the Audio language selection 15 Unpacking 3 4.8 Electronic Programme Guide 16 Quick installation 3 4.9 Timers 16 Table of contents 4 4.10 Important safety instructions 5 DIGITAL TEXT - MHEG interactive television 16 1 Product description 7 1.1 Front view 7 1.2 Rear view 8 1.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 5 For safe operation and optimal lifetime Your receiver has been manufactured to meet the appropriate safety standards, but the instructions below must be followed to operate it safely.These instructions must be kept for future reference. - Before connecting the receiver to the mains, check that the mains supply voltage corresponds to the voltage printed on the rear of the receiver. If the mains voltage is different, consult your dealer.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 6 Mains connection Important note English This apparatus is fitted with an approved moulded BS1363 plug. To change a fuse in this type of plug proceed as follows: - Remove fuse cover and fuse. - Fit a new fuse that should be a BS1362 ASTA approved type. - Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Product description 1.1 Front view Q 1 STANDBY button: English 1 Page 7 WE R ........................ Switch the receiver ON or to standby. 2 LED1 (Red): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display receiver status (see status indicator table). 3 LED2 (Red/Green/Orange): 4 Remote control receiver window .............. Display receiver status (see status indicator table).
NOTICE DTR 320_290405.qxd 1.2 29/04/05 14:07 Page 8 Rear view English Q W 1 AERIAL IN (*): E .......................... R T Y U I O Input to connect your UHF aerial. 2 RF OUT (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF output to be connected to the aerial input of your video recorder or TV set, refer to chapter 2 for recommended connection diagrams. 3 TV(*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTICE DTR 320_290405.qxd 14:07 Page 9 Using the remote control 0-9 number keys - In viewing mode: selects channels - In menu: directly selects a menu item or sets a setting - In standby: wakes up the receiver INFO - Opens the info banner - Then shows extended program information - Then closes the banner EXIT Currently inactive. For future use.
NOTICE DTR 320_290405.qxd 2 29/04/05 14:07 Page 10 Connecting your digital receiver English There are several ways you can connect and incorporate your digital receiver into your existing audio/video equipment set up. Warning! Before starting to connect: - Unplug all equipment (TV set,VCR and/or DVD, etc.) from the mains. - Do not connect your digital receiver to the mains supply now.
29/04/05 14:07 Page 11 Terrestrial Receiver to AC outlet 6 RF Cable TV set EXT 2 EXT 1 EXT 1 EXT 2 VCR/DVD ANT IN ANT OUT For optimum configuration - Plug your aerial lead plug into the “AERIAL IN” socket of your digital receiver. - Connect the “RF OUT” socket of your digital receiver to the “ANT IN” socket of your VCR by means of the RF coaxial lead supplied with your digital receiver.
NOTICE DTR 320_290405.qxd 2.2 29/04/05 14:07 Page 12 Connecting to your HiFi/Audio receiver equipment (Analogue/Digital) English Depending on your HiFi / Audio receiver equipment, you might have several options to connect your digital receiver.
NOTICE DTR 320_290405.qxd 14:07 First installation Requirements for a fast and successful first installation are as follows: • You already have an aerial. • Your aerial is correctly pointed at the terrestrial transmitter corresponding to your area (1). • Your digital receiver connection is according to the diagrams depicted in chapter 2.1 or 2.2. • Your TV set is switched on. 3.1 Page 13 Channel scan - Connect your receiver to the mains.The Setup screen appears.The selection is on Service scan.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 4 Day to day operation 4.1 Switching your receiver ON/OFF (standby) English To wake up your receiver from standby mode, press , , , or any number button of the remote control. Alternatively, press the button on the front panel of the receiver. To put your receiver in standby, press the remote control standby button. Alternatively, press the button on the front panel of the receiver.
4.4 29/04/05 14:07 Channel banner Each time you select a new channel, a banner appears at the top of the screen. This banner indicates: • the current channel number and name, • the start and end time of the current programme, • the current programme name, • the icons for the current programme properties, • the current time, • the time left before the next programme starts. Page 15 Then press again to display extended information. Then press again to close the channel banner. 4.
NOTICE DTR 320_290405.qxd 4.8 29/04/05 14:07 Electronic Programme Guide English You are watching digital TV or listening to a digital radio programme: - Press the button to open the programme guide.The current programme list (called “Now/Next”) appears. - Press the ibutton to consult the current day programme list. - Press the t or y to move to the wanted channel. - Press the button to select the channel. Page 16 4.9.
NOTICE DTR 320_290405.qxd 14:07 Page 17 Changing the settings of your receiver You can change the receiver settings to adapt the receiver to your aerial conditions, Audio/Video set up or other preferences. 5.1 General information 5.1.1 Basic menu navigation - When watching digital or listening to digital radio, press
NOTICE DTR 320_290405.qxd 29/04/05 14:07 - Scroll to the setting you want to change. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the settings. Page 18 Note: if the parental control is active, you must enter your PIN code to access the relevant sub-items of this menu. English 5.2.2 Location Location is selected in the Preferences submenu.This item is used to select the country where you operate your receiver and corresponding time zone.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 19 The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values: • Video Output: CVBS-PAL, or Y/C. CVBSPAL is the default and recommended setting. • Easy Record: select the control method that suits your VCR. Refer to your VCR user manual. 5.2.3.3 Digital audio output Select AC3 (digital audio 5.1) only if your receiver is connected to a Dolby Digital home entertainment system.
NOTICE DTR 320_290405.qxd 5.3 29/04/05 14:07 Installation English - Press the
29/04/05 14:07 - Press u to exit the screen and return to the Service lists sub-menu, or press the blue colour button to exit the menu. Page 21 5.3.2.1 Add new services This feature is used to install new available services. - Press ito enable the installation feature. - Press to start searching for new services. Note: to interrupt the search, press . No services are stored. 5.3.1.
NOTICE DTR 320_290405.qxd 5.3.3 29/04/05 14:07 Test reception English This feature is used to help you position your antenna and check the availability of signals on specific RF channels. The selection is on RF channel. - Press ito access the list of RF channels. Default selection corresponds to the current channel. - Scroll up or down the list to the RF channel you want to select. - Press to view the signal quality and strength for the selected channel.
29/04/05 14:07 - Press to confirm. - Press u to exit the screen and return to the System software item, or press the blue colour button to exit the menu. Note: to carry out the update when new software is available, simply follow the on-screen instructions. 5.5 Timers - Press the ibutton to access the Timers submenu. 5.5.1 Record/Remind This item is used to set and edit recording timers and reminders. - Press to access the timer list.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 24 Note: when a recording timer is active, you cannot zap through digital channels, but you can switch to analogue TV using the button and zap through analogue channels. English To cancel an active timer: Refer to paragraph 4.9.3. 5.6.1 5.5.2 Sleep This item is used to set sleep timers. - Press the i button to access the sleep timer values. - Scroll to the value you want to select: from 0 to 4 hours in steps of 30 minutes.
NOTICE DTR 320_290405.qxd 14:07 Page 25 Radio Stations This item is used to create and edit favourite radio lists. - If need be, press the button to switch to radio mode. - Proceed as indicated above. 5.7 Access Restrictions This item is used to enable and edit access restrictions. - Press the ibutton to open the Access restrictions setting menu: • Set Pin code protection: select On to enable access restrictions.
NOTICE DTR 320_290405.
29/04/05 14:07 7 Advanced settings 7.1 Changing the remote control setting If you have other items of equipment in your home and the remote control of the PHILIPS receiver interferes with them, you can change the setting of the remote control. For this you must change the setting of both your receiver and remote control. To change the setting of your receiver: Refer to paragraph 5.2.3.6.
NOTICE DTR 320_290405.qxd 7.2.2 29/04/05 14:07 Digital receiver and VCR settings English Refer to paragraph 5.2.3.2 on how to enable the “Easy Record” function of your digital receiver. - Depending on your VCR brand and type, you have to set the “VCR control” option to “Prepare Record” or “Record Link”. Refer to the user manual of your VCR alternatively try the two options to find out which is applicable. - Set your VCR to the mode allowing control by your digital receiver. 7.2.
NOTICE DTR 320_290405.qxd 14:07 Page 29 Troubleshooting guide Experiencing difficulty operating your digital receiver? Check the following points first! Problem Possible cause Action No picture, no sound and no front panel indication. Receiver is not plugged into the mains. Check mains connection and press the Standby button on the front of the receiver. No picture, no sound, but the front panel red LED is on. Your receiver is in Standby mode.
NOTICE DTR 320_290405.qxd 29/04/05 Problem 14:07 Page 30 Possible cause Action English You cannot select all of the channels and the P+/- or Arrow up/down buttons do not always work. Some channels have been selected as favourites and the favourites mode is on. Use the button to select another Favourite list. Use the All TV Channel list to see all available TV channels. You cannot access a particular channel, even using the number buttons.
NOTICE DTR 320_290405.qxd 14:07 Page 31 Technical specifications This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.
NOTICE DTR 320_290405.
