DTR 220/05 www.philips.
Contents English Quick Start Guide . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Environmental Markings . . . . . . . . . . . . . . 5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . 6 Identification of Parts . . . . . . . . . . . . . . . . . 6 The Remote Control . . . . . . . . . . . . . . . . . 7 Mains adaptor . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting Your Digital Set Top Box to other equipment . . . . . . . . .
Quick Start Guide English Connecting to a Television Example TV set, rear panel UHF Aerial SCART input on TV SCART cable (supplied) Set Top Box Power Supply Adaptor (supplied) SCART output to TV RF in connector 12V DC Set Top Box rear panel Connecting to a Television and Recorder UHF Aerial Example TV set, rear panel SCART input on TV SCART cable (supplied) RF In connector Set Top Box Power Supply Adaptor (supplied) 12V DC SCART output to TV Set Top Box, rear panel RF Out connector RF cable S
Introduction English Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble-free service. About This User Manual This user guide contains all the information you need to know about how to setup and watch available 'Freeview' channels using your set top box. Safety is Important To ensure your safety and the safety of others, please ensure you read the Safety Instructions before you operate this product.
Notes with regard to the installation location Environmental Markings - Do not expose this device to extreme temperatures. Therefore: -Avoid direct solar radiation and radiator heat; -Do not obstruct the air ventilation by covering the ventilation openings with objects, like for example magazines, table cloths, curtains, etc.; -Leave a minimum clearance of approx. 40 cm above and to the sides.
Getting Started English Remove your Digital Set Top Box carefully from the box, and remove the packaging from each part. Note: For optimum placement and use of product, ensure that the rear or the product is placed at least 10 cm from the edge of the table or shelf.
Digital Set Top Box English Front view IR Receiver / Blue LED, Normal Operation - off, Stand-by - on Rear view RF out RF in from Aerial Power Supply in, 12 V DC Scart output connector for VCR and DVD units Scart output connector for TV SPDIF (Digital audio out) Mains Adaptor Power cable (1.
Connecting Your Digital Set Top Box to other equipment English The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are unsure on how to connect to your set top box, always consult your manufacturer's user guide supplied with your equipment.
1 Connect your equipment according to the appropriate system diagram given on the previous pages and power up/turn on the equipment. During initialisation the indicator on the front panel will flash for a few seconds and then remain off. If the indicator is blue (stand by) press the Power key on the remote control. The front panel indicator will now be off. 2 To switch off the set top box, press Power again. Note: The displayed values for the start and stop frequency can be maintained in most cases.
Using the Set Top Box English Volume control - Use the volume keys + and - for increasing or decreasing the volume. Mute function By pressing the MUTE key, the sound reproduction is stopped. The sound is audible again if you... - ... press the MUTE key again, or - ... press one of the volume control keys. Channel List The Channel List presents a list of all channels found during the channel search. The list comprises radio and TV channels.
You can individually set the sequence of the channels within a favourites list. banner by pressing the INFO key again. The extended information banner supplies further details with regard to the current program. English Sorting channels in the favourite list 1 Press the I-II key to switch to the favourites list. 2 Highlight the channel you want to shift by using the arrow keys or . 3 Press the OK key to confirm the channel to be shifted.
How to use the options: 1 Call up the desired channel. English 2 Press e.g. the I-II key for sound selection. If a teletext is offered, you can call it up by using the TEXT key. - Due to the progressive technical development, more and more broadcasting services will extend this offer in the future. 1 Select the desired channel. 2 Press the EPG key to call up the electronic program guide. Using teletext 1 Press the TEXT key to call up the teletext.
2 Press the TIMER key. - the cycle (interesting for series and regularly recurring programs) English 3 Then highlight OK behind Apply, and press the OK key. Switching off current timer functions Note: During a timer program, only few keys can be activated: I-II, the volume keys + and -, as well as the MUTE key. To switch off the timer function: 1 Press On / Off. 3 Press the OK key. The window is closed and the selected program is stored in the timer list. A program message is displayed.
VCR output format Settings Menu English 1 Press the MENU key to open the main menu. The menu item Box Settings is highlighted by default. Note: You can close any menu by pressing the EXIT key. 2 Press OK. The Box Settings menu displays: Here you can choose between video (FBAS) and S-Video (Y/C). AFD Automatic The broadcast picture format may deviate from the picture format to be displayed. AFD recognizes and corrects the presentation if you select the option ON.
Here you set the transparency of the OSD. If you have difficulties to read the OSD with transparent setting, select not any. Miscellaneous settings Options here include: - Time Zone settings - Audio Format (Mono - Stereo) This is useful if programs are being broadcasted in multiple languages (right-left channel). Displaying channel and system information / adjusting the antenna This function solely serves to supply information on one channel.
Channel search English In the main menu you can choose between Automatic Search and Manual Search. 2 Successively select the adjustable values by using the arrow key or . - The desired Frequency is set by pressing the arrow key or . - The desired band width is set via the arrow keys. Note: In order to carry out a new initial installation, you have to reset the device to its default settings, see page 15. 3 Choose whether all channels or channels that are freeto-air only are to be searched for.
1 Press the MENU key. 2 Highlight the item Security by using the arrow keys and press the OK key. 3 Enter the PIN code and acknowledge by OK. Radio Note: A digital radio program currently is not broadcast in all countries via antenna. 1 If a digital radio program is broadcast, press the RADIO key to receive it. 2 In order to view the TV program again, press the RADIO key again. Note: The PIN code is set to 0000 at delivery. Also observe the displayed information.
Troubleshooting English If you experience an operating problem with your Digital Set Top Box, please refer to the trouble-shooting table below and then the notes that follow.
General Power Supply - DVB terrestrial Free-To-Air receiver compliant to EN 300 744 - Power supply 230VAC/50Hz to 12VDC - MHEG5 and LCN support English Technical Data - Operation power consumption: 7 W - Maximum stand-by mode consumption: 5 W - UHF frequency range support - Video and Audio out via 2x SCART - Digital audio out - Fast channel search - Reed-Solomon decoding support (EN 300 744) - Automatic FEC selection (1/2, 2/3, 3/4, 5/6, 7/8) - MPEG2 Transport Stream support: ISO/IEC 13818-1 - DVB-V
Guarantee English This set top box is guaranteed for 12 months from the date of original purchase. If any defect arises due to faulty materials or workmanship, the set top box will either be replaced, a refund given or repaired free of charge (where possible) during this period by the dealer from whom you purchased. The guarantee is subject to the following provisions: - The product must be correctly assembled and operated in accordance with the instructions contained in this user guide.
