GB_Anleitung_Philips_DTR200_Englisch.book Seite 1 Montag, 24.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 2 Montag, 24. Oktober 2005 10:47 10 Table of Contents English Control elements and functional components . . . . . . . . . . . . . . . . . . . . 3 Remote control . . . . . . . . . . . . . . . . . . . . . . 3 Front side . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Back side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 First steps . . . . . . . . . . . . . . . . . . . . . . 4 Scope of delivery . . . . . . . . . . . . . . . . . . . . .
GB_Anleitung_Philips_DTR200_Englisch.book Seite 3 Montag, 24.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 4 Montag, 24. Oktober 2005 10:47 10 First steps English Scope of delivery - Only the functions described in these Operating Instructions may be carried out with this device. Check the completeness of the individual parts provided: - If possible, keep the Operating Instructions ready at hand near the appliance.
Danger of electric shock by humidity - The device may not be exposed to dripping or splashing water. Prevent liquids from entering into the device. In case of need, immediately disconnect the power plug. - The device may not be used in damp locations (e. g. bathroom) or rooms with heavy dust accumulation. - The bottom side of the device features the device feet.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 6 Montag, 24. Oktober 2005 10:47 10 Connecting other devices English Connecting a DVB-T receiver to a TV set and DVD player, or to a video-tape recorder Exemplary view TV set from the back UHF antenna Antenna cable (Not contained in the scope of delivery. Please use your own cable) SCART input TV set SCART cable (contained in the scope of delivery) Optional - not required if a SCART cable is attached.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 7 Montag, 24. Oktober 2005 10:47 10 Switch-on/switch-off Switch the receiver on by pressing the ON/OFF button (standby button) on the remote control and wait until you see the welcome image on your screen. The LED is green if the receiver is switched on. When you switch on your receiver for the first time, an assistant will guide you through all the required steps.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 8 Montag, 24. Oktober 2005 10:47 10 Change of channel You can change the channel in different ways: English - By pressing the channel button + or -. While the information banner is displayed on the lower screen edge, you can call up the extended information banner by pressing the INFO button again. The extended information banner supplies further details with regard to the current programme. - By pressing the arrow button =or= .
GB_Anleitung_Philips_DTR200_Englisch.book Seite 9 Montag, 24. Oktober 2005 10:47 10 - The teletext display is enlarged if you press the I-II button. By pressing this button again, the teletext is displayed in its normal size again. English Example: Sound selection German/French - The automatic turning of a subpage (e. g. page 3/6) is interrupted if you press the TIMER/REC button.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 10 Montag, 24. Oktober 2005 10:47 10 NOTE: If the device is switched to radio mode, you can also carry out the previously described actions in the same manner for the stored radio channels. NOTE: You can readopt deleted channels to the list by effecting a new scan. English Defining channels as favourites Editing channel list Possibly the channel list may appear too complex to you or contain channels that you are not interested in watching.
2 Switch the active antenna On by using the arrow button or . - The frequency in MHz is entered via the numerical buttons of the remote control. 3 Press the EXIT button. - The desired band width is set via the arrow buttons. 4 Highlight the automatic scan mode and press the OK button. 5 Set the start or stop frequency via the arrow button or . 6 Specify by the arrow buttons whether all channels or channels that are free-to-air only are to be searched.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 12 Montag, 24. Oktober 2005 10:47 10 NOTE: Depending on the time of day, also "tomorrow" may be displayed. English - By pressing the channel + or - button, you can view the EPG of another channel. - If you want to adopt a programme into the timer list, highlight it and press the TIMER/REC button. Acknowledge the following request by pressing the OK button. NOTE: Detailed information on the subject "timer“ can be found in the next paragraph.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 13 Montag, 24. Oktober 2005 10:47 10 You can reset the device to default settings. In doing so, the individually composed favourites list is deleted. 1 Press the MENU button to open the main menu. 2 Highlight the item settings by using the arrow buttons =or= and press the OK button. 3 Highlight the item calling up default settings and press the OK button. 5 Press the EXIT button 1x and acknowledge the selection system information by using the OK button.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 14 Montag, 24. Oktober 2005 10:47 10 Video output VCR Settings English 1 Press the MENU button to open the main menu. The menu item settings is highlighted by default. NOTE: This item can only be selected, if you have not selected RGB with regard to "video output TV". Here you can choose between video (FBAS) and S-Video (Y/C). 2 Press OK.
Menu settings Calling up default settings Display duration of information banner This function has already been described elsewhere, see page 13. Here you define for how long the information banner, see page 8, is to be shown with regard to a change of channel. If you want to completely eliminate the information banner in case of a change of channel, select not any. Security 1 Press the MENU button.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 16 Montag, 24. Oktober 2005 10:47 10 Changing device PIN Here you can specify your personal PIN code. English 1 Press the OK button. 2 For this purpose, enter the current PIN code and acknowledge by pressing the OK button. 3 Following, enter your new PIN code and press the OK button. 4 For acknowledging your new PIN code, enter it again and press the OK button.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 17 Montag, 24. Oktober 2005 10:47 10 English Diagnostics Fault Possible cause Remedies Device does not start Short-circuit in the antenna cable or low-impedance antenna with simultaneously active antenna power Check antenna cable Remove antenna cable, start receiver and set option active antenna to OFF, see p.
GB_Anleitung_Philips_DTR200_Englisch.book Seite 18 Montag, 24. Oktober 2005 10:47 10 English Fault Possible cause Remedies Bad picture quality Incorrect TV SCART output signal Set other TV output signal, see p.
