Firmware-Upgrade Software

Firmware Update Instruction
1. Download the firmware file from the product support page.
2. Unzip the firmware file and rename the .bin file into DTM9030_CD.bin
3. Put the DTM9030_CD.bin file into the root directory of a USB drive
4. Power on DTM9030 and go to the Source USB.
5. Insert the USB which contains the .bin file to the USB port of DTM9030.
6. When the display shows ‘CD UPD’, press Play
button to start the firmware update.
7. The display will shows ‘COMPLETE’ when the firmware update completes.
8. Change the source from USB to Disc.
9. IMPORTANT: Make sure there is no disc inside the loader.
10. When it shows ‘No Disc’, press the OK
button for 4 times to check the firmware
version.