Doc_DSR2010_230205 9/03/05 11:50 Page 1
DSR2011_052005 17/05/05 14:52 Page 2 Foreword Dear Customer, Thank you for choosing the DSR 2011 digital receiver.With your new DSR 2011 digital receiver, the whole world of television is open to you for top-quality viewing! English This User Manual will help you get the best out of the extensive and fascinating functions of your new digital receiver. As a latest generation digital receiver, the DSR 2011 is also designed to receive and use Premiere services.
DSR2011_052005 17/05/05 14:52 Page 3 Quick installation for the reception of satellite ASTRA 19.2° East You already have one satellite antenna installed. Your antenna is fitted with one universal LNB. Your antenna is correctly pointed at the ASTRA 19.2° East satellite. You only want to install channels broadcast on the ASTRA 19.2° East satellite. - Connect your receiver the satellite antenna and TV set as shown below. Do not connect your receiver to the mains now.
DSR2011_052005 17/05/05 14:52 Page 4 English Satellite ASTRA 19.2° East is already selected. - Check your antenna pointing using the signal strength and quality bargraph indicators. If necessary, change the pointing of your antenna so as to maximize the level of the bargraph indicators. - Press to start searching for channels. During the search, a bargraph indicates the channel search progress. A message is displayed when the search has been completed. - Press to watch digital TV.
DSR2011_052005 17/05/05 14:52 Page 5 Safety and environmental instructions Your receiver has been manufactured to meet the appropriate safety standards, but the instructions below should be followed to operate it safely. These instructions must be kept for future reference. - The receiver does not contain any user-serviceable parts. All maintenance work must be carried out by qualified personnel.
DSR2011_052005 17/05/05 14:52 Page 6 TABLE OF CONTENTS Foreword 2 English Quick installation for the reception of satellite ASTRA 19.2° East 3 Meaning of symbols 4 Safety and environmental instructions 5 6 Day-today operation 19 6.1 Switching your receiver ON or to STAND-BY 19 6.2 Switching from watching digital TV to listening to digital radio 19 6.3 Changing channels while watching digital TV or listening to digital radio 20 1 Product description 8 1.1 Unpacking 8 1.
8 17/05/05 14:52 Page 7 Menu system 27 11.4 For Parents 37 11.5 Advanced settings 38 8.1 Menu tree 27 8.2 Menu navigation 29 11.5.1 TV Settings 38 39 8.2.1 Basics 29 11.5.2 System Settings 8.2.2 Changing settings 29 11.5.3 Country & Time Settings 39 29 11.5.4 Decoder Status 39 11.5.4.1 System Information 39 8.2.3 9 Cancelling/storing changes 11.5.4.2 Software Upgrade 40 11.5.5 Default Settings 40 Electronic Programme Guide (EPG) 30 Premiere Service Menu 30 11.6.
DSR2011_052005 17/05/05 14:52 Page 8 1 Product description 1.1 Unpacking Unpack the receiver and check to make sure that all of the following items are also included in the package: English - 1 remote control with 2 batteries (LR6 AA 1,5 V), 1 SCART cable, 1 mains cord, 1 user manual, 1 Worldwide Warranty booklet. Plastic bags can be dangerous.To avoid suffocation keep the bag away from babies and children. 1.
DSR2011_052005 1.3 17/05/05 14:52 Page 9 Front panel English R Q W E 1 Slot for stand positioning 2 Smartcard slot: 3 Stand-by button with red LED: 4 TV/RADIO button: 5 - button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channel down 6 + button 7 Green LED: 8 Red LED: ........................ ........ See chapter 4. Switch the receiver “On” or to Stand-by. Indicate Stand-by when lit. . . . . . . . . . . . . . . . . . . . . Toggle ...........................
DSR2011_052005 1.4 17/05/05 14:52 Page 10 Rear panel Q W English T Y U 1 TV (*): 2 Digital audio output (*): 3 Serial (*): 4 SAT IN (*): 5 230V~50Hz 25W max (**): 6 Label showing the type and serial number of the receiver. 7 VCR (*): 8 L/R Audio out (*): ................................ ............... .............................. ............................ ........... ............................... .....................
DSR2011_052005 14:52 Page 11 Inserting your Smartcard English 2 17/05/05 To de-scramble digital Premiere channels, you need a Premiere smartcard, which you will be delivered when taking up a Premiere subscription. Insert the smartcard with the golden chip facing up. Push the smartcard into the slot. Approximately 1 cm of the card will be visible outside the slot. New and updated information may be downloaded onto the smartcard from time to time.
DSR2011_052005 17/05/05 14:52 Page 12 3 Remote control 3.1 Inserting the batteries - Remove the remote control back cover. - Insert the two batteries (type LR6/AA - 1.5 V) supplied in the battery compartment as shown on the diagram. English The “Batteries marking symbol” means used batteries must not be disposed of together with your household waste. Please inquire about the local regulations regarding disposal of used batteries.
DSR2011_052005 3.
DSR2011_052005 4 17/05/05 14:52 Page 14 Connecting your Digital-Receiver There are several ways you can connect and integrate your Digital-Receiver into your existing audio / video equipment setup. Warning! English Before starting: - Unplug all equipment (TV set as well as VCR and/or DVD if required) from the mains. Do not connect your Digital-Receiver to the mains supply now. - Check your current wiring because you might keep existing connections of your current Audio/Video setup.
DSR2011_052005 4.1 17/05/05 14:52 Page 15 Connecting to a TV and VCR both fitted with SCART sockets English Incorporate your receiver in your existing installation as described below. - Connect the cable from the satellite dish to the “SAT IN” socket of your Digital-Receiver. - Connect the “TV” SCART socket of your Digital-Receiver to the RGB capable SCART socket of your TV using the SCART lead supplied with your Digital-Receiver.
DSR2011_052005 4.2 17/05/05 14:52 Page 16 Connecting to your audio equipment (analogue or digital) Depending on your audio equipment, you might have several options to connect your Digital-Receiver. English ANALOGUE CONNECTION (A) Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio equipment using a double CINCH cable (not supplied). Consult the user manual of your audio equipment to locate the proper analogue audio inputs.
DSR2011_052005 5 17/05/05 14:52 Page 17 First installation English Your receiver is connected to the satellite antenna,TV set and other equipment according to the diagrams in paragraph 4.1. - Switch on your TV set and select a channel. - Plug your receiver into the mains.The welcome screen appears. - Wait for a few seconds for the First installation screen to appear. Note: if no picture appears, press the button twice. 5.1 Installation settings - Select your favourite language.
DSR2011_052005 17/05/05 14:52 Page 18 Note: if you press during the scanning process, you interrupt the scanning and go back to the previous screen. In this case, none of the channels found are stored. English Once scanning has been successfully completed, a completion message is displayed. - Press ; a new screen appears, with a message indicating that a search for new software is in progress. - Press to stop searching and tune the receiver to the first channel in the main TV list.
DSR2011_052005 17/05/05 14:52 Page 19 6 Day-today operation 6.1 Switch your receiver ON or to STAND-BY English The left-hand side LED is lit in red. Your receiver is in Stand-by. To wake up your receiver: - Either press , , , or any number button. - Or press the <+>, <->, button on the front panel. You are watching digital TV or listening to digital radio. To put your receiver in Stand-by: - Press the remote < > button.
DSR2011_052005 17/05/05 14:52 Page 20 6.3 Changing channels while watching digital TV or listening to digital radio 6.3.1 Using number buttons - Dial a number using the remote number buttons to select the corresponding channel. English 6.3.2 Using / buttons - Press to select the next channel in the current channel list. - Press to select the previous channel in the current channel list. - Alternatively, use the <-> or <+> button on the front panel. 6.3.
17/05/05 14:52 Page 21 - icons indicating the channel properties, e.g. subtitles availability (see icon table), - NOW programme information (and NEXT programme information, accessible by pressing the ibutton), - a bargraph indicating: • the start time of the current programme, • the start time of the next programme, • the current progress. To display the banner anytime while watching digital TV or listening to digital radio: - Press the button.
DSR2011_052005 17/05/05 14:52 Page 22 - Select the desired setting using the uor i button. - Press to confirm and exit the screen. Alternatively, press the or button to quit the option screen. Note: by default, subtitles are disabled. 6.7 Electronic Programme Guide (EPG) English While watching digital TV or listening to digital radio: - Press the button to open the EPG for the current channel.The highlight is on the current programme (also called “NOW” programme).
DSR2011_052005 6.8.1 17/05/05 14:52 Page 23 Setting a timer from the banner While watching TV or listening to the radio press to display the banner.You have plenty of time to program your TIMER for the NOW or NEXT programme. - Press the button once to set a recording timer on the current programme, i.e. programme instant recording. Press again to cancel the timer. Setting a timer from the EPG English 6.8.
DSR2011_052005 17/05/05 14:52 Page 24 TIMER and recover full control of your receiver. 6.9 Switching to analogue TV The button is used to switch between watching digital channels through your receiver and standard analogue channels through your TV set. While watching digital TV or listening to digital radio: - Press the button to switch to analogue TV. - Press again to revert to digital TV or radio. English 6.
DSR2011_052005 7 17/05/05 14:52 Page 25 Premiere features 7.1 English Some Premiere channels include special features. On multifeed channels, for instance during sports broadcasts, you can choose between different matches (e.g. Bundesliga football), change audio soundtracks (e.g. stadium/commentary) or choose between different camera angles (Formula 1). On PREMIERE DIREKT channels, you can also choose the start time of your choice for the movie you're ordering.
DSR2011_052005 17/05/05 14:52 Page 26 - Select from the available video channels the one corresponding to the appropriate programme/time using the u or i button. 7.3 Premiere PIN code English Child protection is a high priority at Premiere. By entering your PIN code, you can watch programmes that have been locked for child protection at any time of the day or night without neglecting the issue of child protection.
DSR2011_052005 17/05/05 14:52 8 Menu system 8.
DSR2011_052005 17/05/05 14:52 Page 28 English For Parents Decoder lock Settings TV Settings TV screen format Display format System Settings TV/VCR SCART output Dolby digital VCR Control TV Audio VCR Audio Default Volume Country & Time Settings Channel lists Time Offset Decoder Status System information Software upgrade Antenna Configuration LNB LNB control (DiSEqC ON/OFF) Scan LNB Configuration LNB 1/2/3/4 (active/inactive) Filter Configuration Channel Access Channel Type Channel Lists
DSR2011_052005 17/05/05 14:52 8.2 Menu navigation 8.2.1 Basics Page 29 English While watching digital TV or listening to the radio: - Press the
DSR2011_052005 9 17/05/05 14:52 Page 30 Electronic Programme Guide (EPG) For day-to-day use, refer to paragraph 6.7. English Note: EPG information has to be updated regularly. Updates are performed automatically every time you turn your receiver to stand-by. To allow for complete update of EPG information, make sure you regularly put your receiver in stand-by, for instance every night when you stop watching digital TV or listening to digital radio.
DSR2011_052005 17/05/05 14:52 Page 31 10.2 Smartcard This screen is used to display information about your smartcard. 10.3 System English This screen is used to display information about your receiver, including the Premiere Serial Number and software version. 10.4 Software Upgrade 10.4.1 Automatic software upgrade notification While in Stand-by, your receiver searches for software upgrade. If available, a notification is displayed at receiver wake-up from Stand-by.
DSR2011_052005 17/05/05 14:52 Page 32 10.6 Display English This screen is used to set your receiver according to the screen and Scart format of your TV set. - Select values for the following: • TV Screen Format: select 4: 3 or 16: 9 depending on your TV screen format • TV SCART Output: default setting is RGB. Do not modify it unless your TV does not support RGB. • AV Control: for proper operation, it is recommended to keep this setting to ON. - Press to exit the screen. 10.
DSR2011_052005 17/05/05 14:52 Page 33 11 Settings 11.1 Timer Manager The Timer Manager is used to set, edit or delete: English o recording timers for the programmes you want to record using your VCR or DVD recorder, o reminders for the programmes you want to see in the near future. To be able to record a digital channel using a VCR or DVD recorder, you must set both your recorder and receiver: - You must set a timer on your receiver.
DSR2011_052005 17/05/05 14:52 Page 34 • End Time: select a end time using the numerical keys or the u or i key to modify the default time in steps of 1 hour. • Timer Type: select Recording or Reminder • Frequency: select Once for a single recording at the selected time and date, Daily to record once every day, or Weekly to record once every week using the u or i key. - Press to confirm, or to go back to the timer list screen.
DSR2011_052005 17/05/05 14:52 Page 35 - Edit the channel list name, using the uor i key to move to the character to be modified, and the yt keys to scroll through available characters. Note: use the red colour key to delete a character, and the green colour key to switch from upper to lower case. English - Press to confirm or to cancel your changes and return to the previous screen. To confirm your changes and exit the List Organization screen: - Press . 11.2.
DSR2011_052005 17/05/05 14:52 Page 36 To add channels to the selected list: - Press the green colour key to add all the new channels available in the selected channel pool, displayed on the left hand side of the screen. - Alternatively, scroll to the channel(s) you want to add using the yt keys and press . - Press to exit the screen. 11.2.3 Channel Pool English The channel pool contains all the channels found during the scan.
DSR2011_052005 17/05/05 14:52 Page 37 11.3 Your Preferences Your Preferences is used to set: o Display options o Language options 11.3.1 Display options English This screen is used to set display options according to your preferences. - Select values for the following: • Banner Duration: select a banner display duration, from 2 to 8 seconds using the uor i key. • Banner Transparency: select On to enable banner transparency.
DSR2011_052005 17/05/05 14:52 Page 38 Additionally, you may modify your receiver PIN-Code from this screen. To modify your password: - Press the red colour key to access the Password Change feature. - Enter your current password. Note: if you enter an incorrect password, a pop up screen appears. Enter your password again. English - Enter your new password using number buttons. - Enter your new password again to confirm. - Press to exit the Password Change screen. 11.
DSR2011_052005 17/05/05 14:52 Page 39 11.5.2 System Settings English This screen is used to set your receiver audio/video output settings. - Select values for the following: • TV/VCR SCART Output: select the SCART output format supported by your TV set and VCR (refer to your TV and VCR user manual for more information) • Dolby Digital: select Yes to enable Dolby Digital sound • VCR Control: select the Easy Record feature your VCR supports (for more information, refer to paragraph 12.
DSR2011_052005 17/05/05 14:52 Page 40 English 11.5.4.2 Software Upgrade This item is used for software upgrades. Select it to check the current software version as well as launch a search for new software. After a while, the Software Upgrade screen indicates whether new software is available. - Press to exit the screen in case no new software is available.
DSR2011_052005 17/05/05 14:52 Page 41 11.6.1 Antenna Configuration - Select appropriate antenna control (Tone Burst or DiSEqC) depending on your setup. - Allocate the appropriate satellite(s) to the LNB(s). Alternatively, launch auto-detection using the red colour key for automatic identification of available satellites, then press to go back to the Antenna Configuration screen. English Note: the system can detect the following satellites: ASTRA 19.
DSR2011_052005 17/05/05 14:52 Page 42 • Channels lists: select RESET to replace all channel lists, VIRGIN to reset the receiver to the factory settings by pressing the red colour key, and then launch first installation, or NO CHANGE to keep your channel lists as they are. Note: in the latter case, you will need to use the Channel Manager feature to add channels to your lists from the updated channel pool. English - Press to go back to the Antenna Configuration screen. 11.6.
DSR2011_052005 17/05/05 14:52 Page 43 12 Other settings 12.1 Restoring default settings 12.2 Changing the remote control setting If you have other items of equipment in your home and the remote control of the Philips receiver interferes with them, you can change the setting of the remote control. For this you must change the setting of both your receiver and remote control.
DSR2011_052005 17/05/05 14:52 Page 44 12.3 Easy Record to enable VCR or DVD control 12.3.1 Connecting your equipment for Easy Record English The Easy Record feature allows automatic recording without requiring you to programme your VCR or DVD recorder. All you need to do is set a recording timer on your receiver.Your VCR or DVD recorder will then start/stop recording automatically.
DSR2011_052005 17/05/05 14:52 Page 45 - Plug all your equipment, excluding your Digital-Receiver, into the mains. - Read the Quick installation chapter to proceed with the channel scan if not already done. With this connection set up: - You can watch digital TV while you record analogue TV. - You can watch analogue TV while you record digital TV. - You can record the digital TV channel you are watching. 12.3.
DSR2011_052005 17/05/05 14:52 Page 46 13 Troubleshooting Please be aware that new software may change the functionality of your receiver. Should you experience any difficulties with the operation of the receiver, please consult the relevant section of this manual, including this Troubleshooting section. If the problem cannot be solved, call your dealer or a customer service adviser. Symptom Cause Remedy English The display on the front panel does not light up.
17/05/05 14:52 Page 47 Symptom Cause Remedy Intermittent reception. Faulty connections. Incorrect dish pointing. Check all connections and cable. Adjust the dish pointing. Fasten the antenna securely. The picture is not sharp and onscreen text is difficult to read. TV SCART output format not set to RGB. Change the setting of the TV SCART item to RGB from the System Setting menu. TV SCART not connected to the RGB capable SCART socket of your TV set. Inappropriate TV SCART.
DSR2011_052005 17/05/05 14:52 Page 48 14 Technical specifications This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.
17/05/05 14:52 Page 49 English DSR2011_052005 RUNNING HEADS 49
