User manual

10
Connect power to standalone
docking charger (optional)
To charge your iPod/iPhone/iPad, connect •
the AC power cord to
the • ~ DC IN socket on the docking
charger.
the wall power socket.•
Switch to standby
The unit switches on automatically after
power connection.
To switch the unit to standby mode, press •
on the back of the main speaker.
To switch the unit on from the standby •
mode, press
again.
ON/OFF
Connect power
Caution
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed on
the bottom of the unit.
Risk of electric shock! When you unplug the AC
•
power cord, always pull the plug from the socket.
Never pull the cord.
Before connecting the AC power cord, make sure
•
that you have completed all the other connections.
Connect power to speakers
Connect the AC power cord to •
the • ~ AC IN socket on the back of
the main speaker.
the wall power socket.•
It takes about 35 seconds for the •
speakers to boot up. During boot-up,
the LED indicator on the back of the
main speaker blinks in green quickly.
After boot-up, the LED indicator •
starts to blink in green slowly.
EN