User manual

18
Stream from your Wi-Fi enabled PC
or Mac installed with iTunes 10
Note
Before you open iTunes, make sure that you have •
enabled Bonjour service in your PC. To enable the
service, you can click Start->Settings->Control
Panel, and double-click Administrative Tools->
Services->Bonjour Service, then click Start followed
by OK on the pop-up menu.
1 Open iTunes 10.
2 Click the AirPlay icon at the bottom right
corner of the window.
3 Select Philips_Fidelio XXXX (or user
customized name) from the list.
4 Select a media file and start play.
5 Wait until successful audio streaming to
the speakers.
Control play
You can select different play options from
either your AirPlay device or the supplied
remote control.
Note
All the operations below are based on the supplied •
remote control.
To start or pause play, press • .
To skip to the previous or next track, •
press
/ .
To adjust volume, press • +/- repeatedly.
To mute or restore volume, press •
.
To switch to the MP3 link source •
(if connected), press
.
To switch back to the AirPlay device •
source, press
.
3 Select Philips_Fidelio XXXX (or user
customized name) from the list.
4 Select a media file and start play.
5 Wait until successful audio streaming to
the speakers.
EN