Always there to help you Register your product and get support at www.philips.
1 Important 2 Safety Notice 2 3 2 Your Entertainment System 5 5 5 5 6 7 3 Prepare 8 8 8 8 Introduction What's in the box What else you need Overview of the main unit Overview of the remote control Connect power Turn DS9100W on Prepare the remote control 4 Connect to your home Wi-Fi network for AirPlay Method 1: Use Wi-Fi network login sharing Method 2: Connect to a WPS router Method 3: Connect to a non-WPS Wi-Fi router 5 Play Stream audio from your iTunes music library to DS9100W Play and charg
1 Important Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Risk of overheating! Never install this apparatus in a confined space.
When you change the batteries, always keep all new and used batteries out of reach of children. Make sure that the battery compartment is completely secure after you replace the battery. • If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. Important notes for users in the U.K. Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug.
means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Tip •• Please visit www.philips.com/welcome for information about more Philips AirPlay-enabled devices.
List of compatible iTunes host devices for AirPlay a IR sensor • Detect signals from the remote control. Point the remote control directly at the sensor. In terms of AirPlay, DS9100W is compatible with: b Lightning dock for iPod/iPhone/iPad • a Wi-Fi enabled PC/Mac installed with iTunes 10.2.2 (or later); and c • the following iPod/iPhone/iPad models installed with iOS 4.3.
i • Switch between the AirPlay audio source and the iPod/iPhone/iPad dock source. English Overview of the remote control a i b c h d g e f a • Mute or restore volume. • Select the 3.5mm audio input source. b c Up/down keys • In dock mode, navigate through the iPod/iPhone/iPad menu. d Left/right keys • Fast reverse or fast forward within a track on your iPod/iPhone/iPad. • Skip to the previous/next track. • Start or pause play. e f VOL +/• Adjust volume.
3 Prepare »» During boot-up, the indicator on front panel blinks yellow. »» After boot-up, for first-time setup, the indicator turns solid yellow, and the unit is ready for Wi-Fi setup. If a Wi-Fi connection has been set up previously, the indicator blinks amber and white slowly to search for the set up Wi-Fi network. Always follow the instructions in this chapter in sequence.
Close the battery compartment. English 3 Note •• Before you press any function button on the remote control, first select the correct source with the remote control instead of the main unit. •• If you are not going to use the remote control for a long time, remove the battery. •• Point the remote control directly at the IR sensor on the front of DS9100W for better reception.
4 Connect to your home WiFi network for AirPlay Tip •• You can also set up and enjoy AirPlay through other Apple devices such as iPhone 4, iPhone 4S, iPad 2nd generation, iPod touch 4th generation. In this case, you can choose Method 2 or Method 3 for AirPlay setup. Before connection of DS9100W to you home Wi-Fi network, make sure that: a your Wi-Fi router is powered on and working properly. b DS9100W has been powered on and booted up successfully (see 'Turn DS9100W on' on page 8).
2 4 Tap ALLOW (allow) to share your Wi-Fi settings with DS9100W. »» After a while, the indicator on the front panel turns solid white, and the unit beeps. »» DS9100W is connected to your existing home Wi-Fi network successfully. Method 2: Connect to a WPS router Note •• Before you press any button on DS9100W, make sure that DS9100W has been booted up successfully (see 'Turn DS9100W on' on page 8). 1 Press the WPS button on your home Wi-Fi router.
Method 3: Connect to a nonWPS Wi-Fi router 5 Configure the internal Wi-Fi settings of DS9100W based on the settings you wrote on paper at step 1 (see 'Configure the internal Wi-Fi settings of DS9100W' on page 15). 6 Restore your Wi-Fi enabled device back to your existing home Wi-Fi settings (see 'Restore your Wi-Fi enabled device back to your existing home Wi-Fi setting' on page 16). Note •• You can also follow the procedures below to connect DS9100W to a WPS router manually.
• English Switch DS9100W to Assisted Wi-Fi Setup mode After successful boot-up (see 'Turn DS9100W on' on page 8), press and hold on the front panel of the unit. »» The indicator blinks white and yellow alternately. »» A new Wi-Fi network of DS9100W itself is created, with the network name (SSID) of Philips_Install XXXXXX. »» It takes about 45 seconds for successful creation of this new Wi-Fi network. Note •• After you finish manual Wi-Fi setting for DS9100W, this new Wi-Fi network disappears.
3 Wait until successful Wi-Fi connection on your iPod touch/iPhone/iPad. »» is displayed at the upper left corner of your iPod touch/iPhone/iPad. 3 Select Philips_Install XXXXXX from the list of available networks. Tip •• If Philips_Install XXXXXX is not in the list, try to scan the available Wi-Fi networks again. Philips_Install XXXXXX Option 2: Use your Wi-Fi enabled PC/Mac Note •• See the user manual of your PC/Mac for how to connect your PC/Mac to a Wi-Fi network.
1 Launch Apple Safari browser or any other Internet browser on your Wi-Fi enabled device. 2 Type in 192.168.1.1 at the browser address bar and confirm. »» The DS9100W configuration web page is displayed. English Open the built-in web page of DS9100W 192.168.1.1 • Follow the on-screen instructions to configure and confirm the internal Wi-Fi settings of DS9100W. »» After a while, the indicator on the front panel of DS9100W stops blinking and turns solid white, and the unit beeps.
Tip 2 Select your network name (SSID) from the list of available wireless networks. 3 4 Enter the network key if required. •• If you like, you can change the name of your DS9100W in Philips Fidelio Device Name on the DS9100W configuration web page. This is helpful when you have multiple Philips AirPlay-enabled devices in your house and you need to distinguish between them.
Click -> Preferences. »» The Bookmarks menu is displayed. 2 Tick Include Bonjour for Bookmarks bar. 3 Select Philips DS9100W XXXXXX from the Bonjour pull-down list shown at the bookmarks bar. »» The DS9100W configuration web page is displayed. English 1 Philips DS9100W XXXXXX Philips DS9100W XXXXXX 4 Here, you can change the internal Wi-Fi settings or rename your device easily.
5 Play 3 Select Philips DS9100W XXXXXX (or user customized name) from the AirPlay list. 4 Select a media file and start play. »» After a while, you will hear music from DS9100W. Stream audio from your iTunes music library to DS9100W Note •• Make sure that your iTunes host device is connected to the same Wi-Fi network as DS9100W. Your iTunes device can be an iPod touch/iPhone/iPad installed with iOS 4.3.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10.2.2 (or later).
•• If you fail to hear music after successful setup, do one of the following on your iPod touch/iPhone/iPad: Select a media file and start play. »» After a while, you will hear music from DS9100W. •• (1) Disconnect and then re-connect to the same Wi-Fi router again; •• (2) Close all applications running at the background; •• (3) Power off and then power on your iPod touch/ iPhone/iPad again. Philips DS9100W XXXXXX Stream from your PC/Mac 1 Launch iTunes 10.2.2 (or a later version) on your PC/Mac.
Load the iPod/iPhone/iPad • Control play Dock your iPod/iPhone/iPad. You can select different play options from either your iTunes host device or DS9100W. Note •• The operations below are based on the supplied remote control of DS9100W. •• Make sure that you have successfully streamed audio from your iTunes music library to DS9100W. • To start or pause play in AirPlay or dock mode, press . • To skip to the previous or next track in AirPlay or dock mode, press left/right keys.
English Use advanced sound settings If your iTunes host device is an iPod touch/iPhone/iPad: For advanced sound settings and additional features, you can use your iPod touch/ iPhone/iPad to download the Philips SoundStudio app from Apple App Store. It is a free application from Philips. AUX IN Tip •• You can also upgrade the firmware of the device through the Philips SoundStudio app directly (see 'Option 1: Update through Philips SoundStudio (recommended)' on page 22).
6 Update firmware www.philips.com/support Warning XXXX •• Always connect your DS9100W to AC power for firmware upgrade. Never power off your DS9100W during firmware upgrade. You can update the firmware either through the Philips SoundStudio application directly or from a PC/Mac. XXXX. zip Option 1: Update through Philips SoundStudio (recommended) 1 On your PC/Mac, go to www.philips.com/ support. 2 1 Run the Philips SoundStudio app on your iPod/iPhone/iPad.
Make sure that DS9100W and your PC/ Mac are connected to the same Wi-Fi router. 3 Open Apple Safari on your PC/Mac, then select 'Philips DS9100W XXXXXX' from the Bonjour pull-down list. • English 2 Or open any other Internet browser on your PC/Mac, then type in the IP address of DS9100W (available on the Wi-Fi router configuration page) at the address bar. »» The DS9100W configuration web page is displayed.
7 Product information Note •• Product information is subject to change without prior notice.
Warning •• Never remove the casing of this apparatus. Remote control does not work •• •• •• Before you press any function button, first select the correct source with the remote control instead of the main unit. Reduce the distance between the remote control and the unit. Insert the battery with its polarities (+/– signs) aligned as indicated. Replace the battery. Aim the remote control directly at the IR sensor on the front of DS9100W. To keep the warranty valid, never try to repair the system yourself.
•• For some new types of Wi-Fi routers, a network name (SSID) may be created automatically when you use WPS for connection. Always change the default network name (SSID) to a simple one that consists of alphanumerical characters, and also change the Wi-Fi security mode to secure your network. Occasional breaking of AirPlay music streaming Do one or all of the following: •• •• •• •• •• •• Move DS9100W closer to your Wi-Fi router. Remove any obstacles between DS9100W and your Wi-Fi router.
Specifications are subject to change without notice. 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. DS9100W_UM_10_V3.
