User guide

7 EN
Charge the iPod/iPhone
When the docking speaker is connected to wall
power outlet, the docked iPod/iPhone begins
to charge.
Tip
• You can also charge your iPod/iPhone through the
built-in battery.
Play from an external device
You can also listen to an external audio device
through this docking speaker.
1 Connect the MP3 link cable to:
• theaudioinsocket(3.5mm)onthe
back of the unit.
• the headphone jack on an external
device.
2 Start to play on the device (see the device
usermanual).
Adjust volume level
• During play, press VOL +/- to increase or
decrease the volume level.
• Slide DBB to the right to turn dynamic
bass boost on.
AUDIO IN
5 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2X5 W RMS
Signal to Noise Ratio 75 dB
MP3 Link 0.6 V RMS 22
kohm
General information
AC power (power
adaptor)
GFP241DA-1024B-1
Input: 100-240V~,
50/60Hz, 0.55A;
Output: 10V 2.4A;
Operation Power
Consumption
10W
Dimensions
- Main Unit (W x H
xD)
310 x 105 x 41mm
Weight
- Main Unit
0.65 kg