Register your product and get support at www.philips.
Contents 1 Important Hearing safety 3 3 2 Your Docking Speaker 4 3 Get started 5 4 Play 6 5 Specifications 8 6 Troubleshooting 9 7 Notice 9 Introduction What's in the box Overview of the speaker Connect AC power Turn on Play from iPod/iPhone Play audio from your PC Play from an external device Listen through headphone Adjust volume Amplifier General information 4 4 5 5 5 6 7 7 8 8 8 8 EN 2
1 Important • • • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical 2 Your Docking Speaker equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
Overview of the speaker 3 Get started Always follow the instructions in this chapter in sequence. ab c d Connect AC power Caution •• Risk of product damage! Make sure that the power e fg a DC IN • Connect AC power. b • Headphone jack. c USB • Sync with a computer through USB cable. • Play music from your computer. supply voltage matches the voltage printed on the bottom of the unit. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
4 Play 3 4 Play from iPod/iPhone 5 You can enjoy audio from your iPod/iPhone through this docking speaker. For first-time use, you will be asked to install DockStudio app on your iPod/ iPhone. Tap [Yes] (yes) to accept the installation request. Follow the on-screen instructions to complete the installation. Compatible iPod/iPhone The docking speaker supports the following iPod,iPhone models: Made for.
Charge the iPod/iPhone When the docking speaker is connected to AC power, the docked iPod/iPhone begins to charge. Play audio from your PC Sync iPod/iPhone with PC Note •• Make sure that iTunes has been configured properly in your PC. •• Due to different materials and product techniques, some USB cables may not work with this device. 1 2 3 4 With this docking speaker, you can enjoy audio from your PC. 1 2 Connect the speaker with your computer with the supplied USB cable. Play audio from your PC.
1 2 3 Press to turn the docking speaker on. Connect the MP3 link cable to: • the MP3-LINK socket at the back of the docking speaker. • the headphone socket on an external device. »» The docking speaker switches to MP3 link mode automatically. Play audio on the device. 5 Specifications Amplifier Rated Output Power General information AC power supply MP3 Link Listen through headphone Plug a headphone into the speaker.
6 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
specialized company. Please observe the local regulations regarding the disposal of packaging materials, and old equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DS6100_10_UM_V1.
