Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Docking Speaker 4 Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started 6 Prepare the remote control Connect power Turn on 4 Play Bluetooth General information 6 Troubleshooting About Bluetooth device 7 Notice 6 6 7 7 Play from iPod/iPhone/iPad Play from Bluetooth deivces Play from an external audio device Adjust volume Mute sound 4 4 5 6 7 9 10 10 10 11 11 11 12 12 EN 2
1 Important Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
2 Your Docking Speaker Congratulations on your purchase, and & ' ( ) # support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus.
Overview of the main unit c a b d f e a Dock for the iPod/iPhone/iPad b / Adjust volume. As LED indicators, show system status. c Select Bluetooth mode. Turn the docking speaker on. Switch to standby mode. 5 EN d Power supply socket Connect AC power. e Sync with PC through a USB cable. f MP3-LINK Connect an external audio device.
3 Get started Overview of the remote control Always follow the instructions in this chapter in sequence. f a e b d c Prepare the remote control Remove the protective tab to activate the remote control battery. 1 2 Open the battery tray. 3 Close the battery tray. Insert one CR2025 battery with correct < = ! CR2025 a Select iPod/iPhone/iPad mode. b / Skip to a track. Search within play. c Mute volume.
Connect the AC power adaptor to: the DC IN socket at the back of the docking speaker. the wall outlet. 4 Play Play from iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this docking speaker. Compatible iPod/iPhone/iPad Turn on Press and hold on the main unit for 2 seconds. » The / LED indicators light up. Switch to standby mode In the following situation, the docking speaker switches to standby mode: Press and hold for 2 seconds again; or The system is idle for 15 minutes.
2 N = % & # ? install DockStudio app on your iPod/ iPhone/iPad. 3 Tap [Yes] request. 4 Follow the on-screen instructions to complete the installation. 5 6 Launch the app after the installation. Play audio on your iPod/iPhone/iPad. » Audio comes out through this docking speaker. 1 V & & % OK. 2 Follow the on-screen instructions to & ! Tip You can press to select Dock source.
4 Launch iTunes to synchronize your docking speaker with PC. » The docked iPod/iPhone/iPad is synchronized with PC successfully through the iTunes. Note Due to different materials and product techniques, some USB cables may not work with this device. Play from Bluetooth deivces Note Before you connect a Bluetooth device to this docking speaker, familiarize yourself with the Bluetooth capabilities of the device. Keep this docking speaker away from other electronic devices that may cause interference.
Play from an external audio device 1 If no iPod/iPhone/iPad is docked, connect *'X ? # X!} % ~ the MP3-LINK socket at the back of the docking speaker. the headphone socket on an external device. 2 Play music on the device (see the device’s ! Tip You can select MP3 link source by pressing remote control. 3 Scan Bluetooth devices that can pair with your device. 4 When “PHILIPS DS3600” is displayed on your device, select it to start connection.
5 Specifications Note Warning Product information is subject to change without prior notice. # Rated Output Power 8 " Aux-in Link 2 X 10 W RMS > 62 dBA 500mV RMS Bluetooth Standard Output power Frequency band Range Bluetooth Standard Version 2.1+EDR Z [ 2.402 ~ 2.480 GHzISM Band Z General information AC Power Operation Power Consumption Standby Power Consumption Max.
About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. $ The device cannot be used with the system to play music. The audio quality is poor after connection with a Bluetooth-enabled device. $ The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. $ ) required for the system.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DS3600_12_UM_V1.
