Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Compliance Care of the environment Notice 2 2 2 2 3 2 Your Docking Speaker 4 4 4 3 Get started 5 5 5 4 Play 6 6 6 8 8 5 Charge 9 9 9 What's in the box Overview Charge DS3480 Switch on or off Play through the lightning dock Play through Bluetooth Play through an audio cable Adjust the volume Charge through the lightning dock Charge through the USB connector 6 Update the firmware 10 7 Specifications 11 11 11 11 8 Troubleshooting 12 12 Amplifier General informati
1 Important This product complies with the radio interference requirements of the European Community. Declaration of conformity Safety • • • • • • • Only use attachments/accessories specified by the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles).
is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Your Docking Speaker Overview a b What's in the box c d Check and identify the contents of your package: • Main unit • AC/DC power adapter • Quick start guide • Safety and notice iOS app for the dock With the lightning dock on DS3480, your iPhone/ iPod can work with the following app: • ClockStudioapp (allows you to select sound settings, listen to the Internet radio, set clock and alarm and update firmware) e f g a Tip •• You can get the ClockStudio app from the App Store on your iPhone/ iPod.
3 Get started Charge DS3480 Switch on or off • Press to switch on. »» , lights up amber. »» The Bluetooth status indicator flashes. DS3480 starts to pair or reconnect through Bluetooth. DS3480 has a built-in battery that can be charged through the supplied AC/DC power adapter. • Connect DS3480 to AC power through the supplied AC/DC power adapter. • To switch off, press again. »» During power charging, Automatic standby flashes in green if you have switched on DS3480.
4 Play Play through Bluetooth Play through the lightning dock Through Bluetooth, you can play on DS3480 from a Bluetooth device, such as an iPad, iPhone, Android phone, or laptop. With the lightning dock on DS3480, you can play from the following iPhone/ iPod: • iPhone 5 • iPod touch (5th generation) • iPod nano (7th generation) 1 2 Make sure that you have switched on DS3480. Mount your iPhone/ iPod onto the dock.
Play from a Bluetooth device 1 2 Make sure that you have removed your iPhone/ iPod from the lightning dock. After successful connection, start music play on DS3480. PHILIPS DS3480 2 On your Bluetooth device, activate Bluetooth and search for Philips DS3480. • For the first-time connection, select Philips DS3480 to start pairing. »» When the connection is complete, the Bluetooth indicator is always on in blue and two beeps sound.
Play through an audio cable Adjust the volume Through an MP3 link cable, you can also play on DS3480 from an external audio device, such as an MP3 player. • • 1 2 3 8 Use an MP3 link cable to connect DS3480 with an external audio device. On DS3480, do the following: • Make sure that you have paused the music on your iPhone/ iPod docked on DS3480; • Switch off Bluetooth on the Bluetooth device that is connected to DS3480. On the external audio device, start music play and change the volume.
5 Charge Charge through the lightning dock With the lightning dock on DS3480, you can charge your iPhone/ iPod when music play is on or off. 1 2 Mount your iPhone/ iPod onto the lightning dock on DS3480. Connect DS3480 to power. Charge through the USB connector With the USB connector on DS3480, you can charge your mobile phone. 1 2 Use a USB cable to connect DS3480 with the external device. Connect DS3480 to power.
6 Update the firmware With the ClockStudioapp on your iPhone/ iPod, you can update the firmware of DS3480. 1 2 Make sure that your iPhone/ iPod is connected to the Internet. Mount the iPhone/ iPod onto the lightning dock of DS3480. »» ClockStudio starts to search for available firmware update. »» When the firmware update is available, a message is displayed. 3 Follow onscreen instructions to complete firmware updating.
7 Specifications Amplifier Rated Output Power 2 X 5 W RMS General information Power supply - AC Power - Battery Operation Power Consumption Standby Power Consumption Max. load for iPod/iPhone Dimensions - Main Unit (W x H x D) Weight - Main Unit Operating temperature and humidity: Storage temperature and humidity: Model: KSASB0241200200HE (Philips); Input: 100-240 V ~, 50/60Hz, 0.6A; Output: 12 V 2 A Li-ion battery <18 W <0.5 W 5V 1 A 274 x 143 x 109 mm 1.
8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/support). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice. 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. DS3480_12_UM_V2.
