Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Compliance Care of the environment Notice 2 2 3 3 4 2 Your Docking Speaker 4 4 4 5 3 Get started 5 5 6 4 Play 6 6 8 9 5 Specifications 9 9 9 Introduction What's in the box Overview of the main unit Connect power Turn on Play from iPod/iPhone Play from an external device Adjust volume Amplifier General information 6 Troubleshooting 10 EN 1
1 Important moving the cart/apparatus combination to avoid injury from tip-over. Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
the disconnect device shall remain readily operable. s This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Compliance Any changes or modifications made to this product that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Notice “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
3 Get started Overview of the main unit Always follow the instructions in this chapter in sequence. Connect power a This docking speaker can be powered by either AC power or batteries. b c d e f a Dock for the iPod/iPhone b c • • • • / Adjust volume. As LED indicators, show system status. Option 1: AC power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit.
Open the battery compartment. 1 2 Insert 4 x 1.5V AA batteries with correct polarity (+/-) as indicated. 4 Play Close the battery compartment. 4X1.5V UM3/LR6 Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod and iPhone models: Made for. • iPod touch (5th generation) • iPod nano (7th generation) • iPhone 5 Turn on Press to turn the docking speaker on. »» The / LED indicators light up.
6 7 Launch the app after the installation. Play audio on your iPod/iPhone. »» Audio comes out through this docking speaker. Note •• With the ClockStudio app, you can enjoy radio, set clock and alarm, adjust sound settings, and update firmware if necessary. 2 Follow the on-screen instructions to complete the firmware update. Update firmware If firmware update is available, the ClockStudio app will search for it automatically and ask you to download it.
3 4 Connect your docking speaker and PC with a USB cable. Launch iTunes to synchronize your docking speaker with PC. »» The docked iPod/iPhone is synchronized with PC successfully through the iTunes. Note •• Due to different materials and product techniques, some USB cables may not work with this device. Play from an external device Note •• Do not disconnect power or undock the iPod/iPhone during the updating process.
Adjust volume To adjust volume: • Press +/- on your docking speaker; or • Adjust the volume control of your iPod/iPhone or external device. 5 Specifications Amplifier Rated Output Power 2 X 5 W RMS General information Power supply - AC Power - Battery Tip •• If the docking speaker is powered by batteries, the volume is lower than that by AC supply. Model: KSAS0151200150HE; Input: 100-240 V ~, 50/60Hz, 0.4A; Output: 12 V 1.5 A 4 x AA (LR6) batteries Operation Power Con- <10.
6 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DS3400_37_UM_V1.
