Always there to help you Register your product and get support at www.philips.
Contents 1 Important Risk of swallowing coin battery 3 4 2 Your Docking Speaker 5 3 Get started 7 4 Play 9 Introduction What's in the box Overview of the main unit Overview of the remote control Prepare the remote control Connect power Turn on Play from iPod/iPhone Play from an external device Adjust volume Mute sound 5 5 5 6 7 7 8 9 11 12 12 5 Specifications 13 6 Troubleshooting 14 7 Notice 15 Amplifier iPhone Speakers Gen
1 Important • • This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Risk of swallowing coin battery • • • • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your Docking Speaker Overview of the main unit Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. a b c Introduction d With this docking speaker, you can • enjoy audio from the iPod/iPhone, and other external audio devices; and • synchronize the iPod/iPhone with your computer through USB socket.
Overview of the remote control a f b e c a b c d e f d • • • • Select iPod/iPhone dock mode. / / Skip to a track. Search within play. Adjust volume. • Mute or restore volume. • Start or pause play. • Select MP3 link mode.
3 Get started Always follow the instructions in this chapter in sequence. Connect the AC power adaptor to: • the power socket at the back of the docking speaker. • the wall socket. Prepare the remote control For first-time use: Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 2 3 Open the battery compartment. Insert one CR2025 battery with correct polarity (+/-) as indicated. Close the battery compartment.
Turn on Press to turn the docking speaker on. »» The / LED indicators light up. Switch to standby mode The docking speaker switches to standby mode in following situations: • Press again; • The speaker is idle for 15 minutes when powered by AC supply. • The iPod/iPhone or external audio device is disconnected when the speaker is operated on batteries. »» The / LED indicators light off.
4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone 2 3 4 For first-time use, you will be asked to install DockStudio app on your iPod/ iPhone.
Note •• With the DockStudio app, you can enjoy music, set 2 Follow the on-screen instructions to complete the firmware update. clock and alarm, adjust sound settings, and update firmware if necessary. • • • To pause or resume play, press . To skip to a track, press / . To search during play, press and hold / , and then release to resume normal play. Update firmware If firmware update is available, the DockStudio app will search for it automatically and ask you to download it.
Charge the iPod/iPhone Note •• If the docking speaker is operated on the batteries, you cannot charge your iPod/iPhone. When the docking speaker is connected to AC power, the docked iPod/iPhone begins to charge. Tip Play from an external device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. Note •• Make sure that no iPod/iPhone is docked in the speaker. 1 •• For certain iPod models, it may take up to a minute before the charging indication appears.
Adjust volume To adjust volume: • Press +/- on the remote control; • Press +/- on your docking speaker; or • Adjust the volume control of your iPod/iPhone or external device. Tip •• If the docking speaker is powered by batteries, the volume is lower than that by AC supply. Mute sound During play, press to mute or restore sound.
5 Specifications Power supply - AC Power Amplifier Rated Output Power Signal to Noise Ratio Total Harmonic Distortion MP3 link 2 X 6 W RMS >62 dBA <1% 500 mV RMS iPhone Signal to Noise Ratio Total Harmonic Distortion >62 dBA <1% Speakers Speaker Impedance Speaker Driver 13 EN General information 4 ohm 2 X 2" full range - Battery Operation Power Consumption Standby Power Consumption Max.
6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DS3150_12_UM_V1.
