Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 2 Your Docking Speaker 3 3 3 4 3 Get started 5 5 5 4 Play 6 6 7 8 9 5 Product information Specifications 9 9 6 Troubleshooting 10 Safety Notice Introduction What's in the box Overview of the main unit Connect power Turn on Play audio from iPod/ iPhone/ iPad Play through an audio cable Other features Update the firmware EN 1
1 Important Safety Only use attachments/accessories specified by the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPod and iPhone are trademarks of Apple Inc.
i Overview of the main unit / Adjust volume. j Toggle switch for lightning/30-pin control a k k j b c i h g f e d a 30-pin connector b Lightning connector c TIME/DATE • Set time and date. d AUDIO IN • Audio input connector for connecting an external audio device. e POWER OUT • USB socket for charging your mobile phone. f DC IN • AC power connector for the supplied AC power adapter. g Bottom light h Display panel 4 • EN • Adjust brightness of display and bottom light.
3 Get started Turn on Always follow the instructions in this chapter in sequence. In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.
4 Play Play audio from iPod/ iPhone/ iPad You can enjoy audio from iPod/ iPhone/ iPad by connecting DS1600. Compatible iPod/ iPhone/ iPad The docking system supports the following iPod/ iPhone/ iPad models.
2 When using DS1600 for the first time, a required software application automatically pops up. Listen to the iPod/ iPhone/ iPad Note •• Make sure that the iPod/ iPhone/ iPad is loaded correctly. • 3 4 Start music play in your iPod/ iPhone/ iPad. »» You can hear music from DS1600. Charge the iPod/ iPhone/ iPad Tap [Yes] (yes)to accept the installation request. Follow the on-screen instructions to complete the installation. »» DS1600 synchronizes time and date from the docked iPod/iPhone/iPad.
Charge your mobile phone Adjust volume Charge your mobile phone through the USB socket in DS1600 with a USB cable (not supplied). During play, press +/- repeatedly to increase or decrease the volume. Other features Set time and date format Adjust brightness Press TIME/DATE repeatedly to display time or date. • Set time format • 1 2 3 In standby mode, press TIME/DATE to selected time format. Press and hold TIME/DATE for 2 seconds to select the 12 or 24 hour format. Press TIME/DATE to confirm.
Update the firmware With the ClockStudioapp on your iPod/ iPhone/ iPad, you can update the firmware of DS1600. 1 2 Make sure that your iPod/ iPhone/ iPad is connected to the Internet. Mount the iPod/ iPhone/ iPad onto the lightning dock of DS1600. »» ClockStudio starts to search for available firmware update. »» When the firmware update is available, a message is displayed. 5 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Max.
iPod/iPhone Charging current Dimensions: - Main Unit (W x H x D) Weight: - Main Unit ≤ 2100 mA 225 x 149 x 96 mm 6 Troubleshooting Warning •• Never remove the casing of this device. 0.83 kg To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support).
2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V DS1600_05_UM_V1.
