Technical data

10
Using with other audio devices
You can use iBoom JukeBox as an external speaker
for other audio devices using a standard 1/8”
(3.5mm) stereo mini-jack cable (available separately).
1. Connect one end of the 1/8” (3.5mm) stereo mini-
jack cable into the Aux-In Jack on the back of iBoom
JukeBox.
2. Connect the cable’s other end to your audio device’s
headphone or Line-Out jack.
3.Turn on iBoom JukeBox.Then use the Volume Buttons
on iBoom JukeBox to adjust your device’s volume.
D Note:To get the best sound quality from iBoom
JukeBox when using the Aux-In, carefully adjust the
volume level of your device until there is no distortion.
Then, control the overall volume of your music with the
iBoom JukeBox controls.
Using to enjoy iPod videos
You may use your iBoom JukeBox to enjoy the
audio of your iPod videos in stereo sound.
Simply connect iBoom JukeBox to yourTV or
video screen via the AV-Out Jack on the back of
the iBoom JukeBox (AV cable available
separately).Then you can use the Display
Remote to navigate your iPod video content
and control video playback
.
C Important: With the iPod docked to iBoom
JukeBox, make sure that the iPod TV Out setting
(found under theVideo Settings) is set to either
Ask or On.
ENGLISH
9
About
The About setting is mainly used for informational
purposes, but should you have a problem with
your Display Remote communicating with the
iBoom JukeBox base unit, you can pair the Display
Remote with iBoom JukeBox as follows:
1. Ensure that there is no iPod connected.
2. With the iBoom JukeBox on, hold the Power
Button down for 5 seconds to enter “Pairing
Mode”.You will know you are in Pairing Mode
when the iBoom JukeBox touch panel flashes in
blue.
3. On the Display Remote, navigate to “About” in the
Settings Menu. Press the Next Menu/Select Button
to tell the Display Remote to pair with iBoom
JukeBox.The iBoom JukeBox base unit will
acknowledge by a quick flashing of the touch panel
in white.
4. Once the Display Remote is paired, you will see a
“no iPod” message on the display screen.
Settings and features
Settings menu
The Display Remote features a simple Settings Menu
with the following options:
Sleep
In the Sleep Menu, you can set the amount of time it
will take the Display Remote to enter Sleep Mode.
To change the time, navigate to “Sleep” in the
Settings Menu and press the Next Menu/Select
Button. Use the Menu Line Item Up or Down
Button to highlight the desired time setting, and
press the Next Menu/Select Button to select your
highlighted option.You may choose from: 30 sec,
1 min, 2 min, or 4 min.
Language
The Language Menu is used to configure the Display
Remote for a specific language.To change the
language selection, use the Menu Line Item Up or
Down Button to highlight the desired language, and
press the Next Menu/Select Button to select your
highlighted option. iBoom JukeBox supports English,
Spanish, Italian, French, German, Dutch, Korean,
Simplified Chinese,Traditional Chinese and Japanese.