DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 1 Conformity, Environment and Safety Safety information: this equipment is not designed to make emergency calls when power fails. An alternative has to be made available to allow emergency calls. Conformity : hereby, Philips declares that the DECT 521xx and 525xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 Phonebook / Right key - Press to access the phonebook from idle mode. - Press to move through the menus and options in menu screen. OK key 16:05 Seite 2 End key - Press to end a call Earpiece - Press to enter the carousel menu - Press to validate your choice Call log / Left key - Press to access the call log from idle mode. - Press to move through the menus and options in menu screen.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 3 Icons on the handset display The display gives information about the operation of your telephone On first use, it is sometimes necessary to wait for a few minutes of charge before seeing icons on the display. When charging, the battery bars scroll from empty to full status. When the handset discharges, the battery shows the status : Full , 2/3 , 1/3 and empty . The answer machine is activated (DECT 525).
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 4 Installing and replacing the batteries in the handset To insert the batteries, open the battery cover, place the batteries as indicated and put the battery cover back.When the handset is placed on the base station the 3 battery bars scroll (if charge is needed). Allow the handset to charge for 24 hours to reach full charge. On first use it may be necessary to wait for a few minutes before seeing symbols on the display.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 5 Handset Registration The additional handset will get full capability when it is registered to the base station (see p. 1). You can register up to 6 handsets to the DECT 521 or DECT 525 base station. To register a handset Unplug and plug back in the mains supply to put the base in registration mode and start the following procedure immediately after that. Press to enter the carousel menu. Scroll to Handset and press to select.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 Rename handset To rename a handset Press to enter the carousel menu. Scroll to Handset and press to select. Scroll to Rename handset and press to select. Long press to delete the current name. Enter the name and press . Language To change the language of the display Press to enter the carousel menu. Scroll to Handset and press to select. Scroll to Language and press to select. Browse through the list and select with .
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 7 Display contrast To set the display contrast Press to enter the carousel menu. Scroll to Handset and press to select. Scroll to Display contrast and press to select. Browse through the levels and select with the appropriate one. Backlight To set the display backlight duration or deactivate it Press to enter the carousel menu. Scroll to Handset and press to select. Scroll to Backlight and press to select.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 8 Intercom Using the Intercom (if there are at least 2 handsets) This feature allows you to make free internal calls, transfer external calls from one handset to another, use the conference option and the babysit feature (room monitoring). Internal call Press to call the selected handset + handset number (for example ). Hang up. Note: if the handset does not belong to the Philips DECT 521/525 range, this function may not be available.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 9 The called handset rings.The external call is put on hold. If there is no answer from the called handset you can resume the call on the first handset. Take the line on the called handset, both internal callers can talk. Press to select Transfer (with handset 1). Scroll to Switch and come back to the external caller. Note: to answer the call on the second handset you can press .
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 10 Sounds Setting the handset sounds The ringers can be set for: - the external standard ringer for callers whose number is not stored in the phonebook or stored with no group settings. - the internal ringer for the intercom (if there are at least 2 handsets). To set the 3 group ring tones see manual DECT 521 / DECT 525.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 11 Troubleshooting Problem No dial tone. Cause The handset is out of range, ( is not displayed). Solution Move closer to the base station and try again. The handset has not been registered to the base station ( is not displayed). Register the handset to the base station (page 5). Check the connections. The base station is not properly connected to the mains or the telephone line. The batteries are low ( displayed).
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 12 Declaration of conformity We, PHILIPS Consumer Electronics Route d'Angers 72081 Le Mans Cedex 9 France Declare that the products DECT521xx and DECT525xx are in compliance with ANNEX III of the R&TTE-Directive 1999/5/EC and then with the following essential requirements: Article 3.1 a : (protection of the health & the safety of the user) Safety : EN 60950-1 (10/2001) SAR : EN 50371 (2002) Article 3.
