User manual

Introduction
8
http://www.philips.com/faqs/dect
To set the handset melody volume
Introduction
The screen in idle mode
- the date & time, the name of the handset and the instructions
to access the menu.
Example of navigation in the menus
To access the carousel menu from idle screen, press on the side of the handset.
The carousel represents a loop of icons that gives access to the different first level menus.
Scroll up or down to reach the desired menu. Press to enter that menu.
The sub-menus are listed and represented by little squares at the bottom of the display.
To reach one particular sub-menu (option) use the “pilot key” and press to enter it.
A shows the selected sub-menu (option).
The shows the sub-menu (option) your are browsing.
Certain menus are directly accessible via a dedicated key (Example : SMS or Intercom )
Understanding the menu system
- “Do Not Disturb” mode , and the alarm clock , if activated.
- Missed calls , new SMS or operator voice mailbox message
, if any.
In idle mode, the DECT 311 display shows various information :
To activate/deactivate these functions press or
Philips screen saver
After 2 minutes of inactivity, the screen saver is displayed :
You can deactivate it (See p.19)
Press to enter the carousel menu
Scroll to Handset ring tone vol. and select
Browse through the levels and select one
The current level is heard, to hear other levels
Scroll to Sounds and select
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 8