DECT 311 GB_IE.qxp 28/06/2004 13:59 Page 1 Quick start guide : to select a menu or option and The Pilot key allows you to navigate into the menus. Press validate a setting. Up : to go left in the menus & options It is also used as short cut to some menus.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 13:59 Page 3 Icons on handset display On first use, it may be necessary to wait for a few minutes of charge before seeing symbols on the display. When charging, the battery bars scroll from empty to full status. When the handset discharges, the battery shows the status : Full , 2/3 , 1/3 and empty The ringer is deactivated. A message on your operator voice mailbox An external call is in progress.
DECT 311 GB_IE.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 6 Information Conformity, Environment and Safety Safety information :This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. Conformity : Hereby, PHILIPS, declares that DECT 311XX is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (See p. 43).
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 7 Installing the phone Installing the base station To properly install the base station, connect the line cord and the power cable. Plug the cord and the cable into the wall. Situate your product close enough to the telephone and mains power sockets so that the cables will reach.
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 8 Introduction Philips screen saver After 2 minutes of inactivity, the screen saver is displayed : You can deactivate it (See p.19) The screen in idle mode In idle mode, the DECT 311 display shows various information : - the date & time, the name of the handset and the instructions to access the menu. - Missed calls , new SMS or operator voice mailbox message , if any.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 10 In call features During an external call, some other options & menus are are available (Phonebook, Call log). Press to enter Options.
DECT 311 GB_IE.qxp 28/06/2004 14:00 Page 11 Editing system Case mode By default, the first letter of a sentence is in upper case. Use to change the case mode: - all characters in upper case (AB) - all letters in lower case (ab) - First letter in upper case and the rest of the text in lower case (Ab) Punctuation and mathematical marks are available through are available on and while other special characters . Scroll to move the cursor left or right.
DECT 311 GB_IE.qxp 28/06/2004 14:01 Page 12 SMS Send new SMS Read SMS SMS settings SMS menu is accessible via the carousel or ! Important information are available on the SMS information leaflet in the box SMS stands for Short Message Service.To benefit from this service you must subscribe to the Caller Display (Caller Line Identification) together with the SMS service from your network provider.
DECT 311 GB_IE.qxp 28/06/2004 14:01 Page 13 You can store an SMS before sending it. After entering the number Enter the destination box (if any)and press Enter the text and select OK OK Scroll to Store and select Note: If you store an SMS you can later retrieve it from Read SMS Read SMS A stored SMS is marked in the SMS list. A received SMS is marked .
DECT 311 GB_IE.
DECT 311 GB_IE.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:01 Page 17 Handset Date & time Display contrast Screen saver Babysit mode Registration Rename handset Babysit mode (only DECT3112) To activate/deactivate the babysit mode Press to enter the carousel menu Scroll to Handset and select Press to select Babysit mode Press to select ON or scroll to OFF and select Note: An intercom is necessary to monitor the room (See p.22).You can still answer/make a call with the handset.
DECT 311 GB_IE.qxp 28/06/2004 14:01 Page 18 To un-register a handset To un-register a handset Press to enter the carousel menu Scroll to Handset and select Scroll to Registration and select Scroll to Un-register handset and select Choose the handset in the list and press OK Enter the RC code (4-digit code) and press OK Note: Should you have your handset serviced alone, please make sure it is un-registered from the base before taking it back to the repair centre.
DECT 311 GB_IE.qxp 28/06/2004 14:01 Page 19 To set the time Press to enter the carousel menu Scroll to Handset and select Scroll to Date & time and select Scroll to Set time and select Enter the current time press OK Warning ! If your phone is connected to an ISDN line through an adapter, the date & time settings may change after each call. Please check the date & time settings in your ISDN system. Please contact your network provider. See FAQ.p.39.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 20 Intercom ! Intercom menu is accessible via the carousel or This feature allows you to make free internal calls, transfer internal calls from one handset to another or use the conference option (DECT 3112 only). It also enables you to use the babysit feature (room monitoring).
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 21 Call transfer via the in-call options During a call you can transfer the call via the in-call options. Press to enter the options (with handset 1) Scroll to Intercom and select If there is only one additional handset, it rings automatically. Otherwise : Select from the handsets list the handset you want to call and select The called handset rings (handset 2).The external call is put on hold.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 22 Initiate the babysit/Room monitoring To use the babysit mode feature you need to activate it (see p.16) and to initiate an intercom. Place the handset in the baby’s room and you will hear the noise on your additional handset. Press to enter the carousel menu Scroll to Intercom and select If there is only one additional handset, it rings automatically.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 23 Phonebook View Add new ! Phonebook menu is accessible via the carousel or 50 names and numbers can be stored in the phonebook (shared with all handsets). The phonebook contains all the information related to the callers, especially the group settings.The names & numbers are shared with all the handsets registered to your base. Group settings There are 3 groups (group A, group B & group C).
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 25 To define a group for a name and a number (See p.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 26 Call log View Delete all Call log settings ! Call log menu is accessible via the carousel or The call log can store up to 20 entries. - Unanswered call - Outgoing calls Answered calls Messages (voice mailbox) The call log shows the list of incoming & outgoing calls. If you have subscribed to the Caller Display (CLI), the name (or number) of the callers, will be displayed.The date & time of the call is also shown.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 27 To view the number Scroll up to directly reach the calls list Browse through the list Press to select an entry Scroll to View number and select To store Scroll up to directly reach the calls list Browse through the list Press to select an entry Scroll to Store and select Enter the name or number and press OK The name and number are stored in the phonebook.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 28 To send an SMS Scroll up to directly reach the calls list Browse through the list Press to select an entry Scroll to Send SMS and select Enter destination box (if any) and press OK Edit the text and press Press to select Send Now Note: Once in the list of names, a press on enables you to directly edit your SMS text.
DECT 311 GB_IE.qxp 28/06/2004 14:02 Page 29 Operator services This feature allows you to activate or deactivate operator services. Codes need to be set in the phone (See p.37). Contact your network operator for more details.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 30 Extra Call duration Alarm clock “Do not disturb” Call duration To view the time Press to enter the carousel menu Scroll to Extra and select Press to select Call duration The total time of communications is displayed Press to Reset the counter The alarm clock To activate/deactivate the alarm clock A long press on activates/deactivates the alarm clock with your own settings.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 32 “Do not disturb” mode This feature allows you to screen calls after a certain time in the evening when you do not want to be disturbed. Enter the time and select the group(s) allowed to call you. If the caller does not belong to an allowed group the handset will remain silent, while he will hear ringing. The operator voice mailbox (if any) will answer the call. A subscription to the Caller Display (CLI) service is needed.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 33 Sounds Handset ring tones Group ring tones Handset ring tone volume Settings Handset ring tones To set the handset ring tone You can set the ring tone heard on the handset when receiving a call.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 34 Group ring tones To set the group ring tone There are 3 groups of callers (See p.23).You can associate a ring tone to a group. Press to enter the carousel Scroll to Sounds and select Scroll to Group ring tones and select Press to select a group (A, B or C) Browse through the list of melodies and select Handset ring tone volume To set the ring tone volume Press to enter the carousel Scroll to Sounds and select Scroll to Handset ring tone vol.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 36 Base station Enable registration Line settings Service codes settings Enable registration This feature allows you to register a DECT peripheral without keypad Some DECT peripherals, such as repeaters, do not have keypad. A special menu-operated procedure is used to register such peripherals to the base station. Also use the peripheral instructions to register it to the base.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 37 To change the recall type Press to enter the carousel menu Scroll to Base station and select Scroll to Line settings and select Scroll to Recall type and select Press to select Short flash or scroll to Long flash and select Note:This setting is useful when using operator services.The use of some services accessed with R+1, R+2 and R+3 (call waiting, call forward...
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 38 Service codes settings When you subscribe to extra services with your operator you may need to set some codes in your phone. The default codes are codes used by the main national operator. If you subscribed to another operator you may need to change the codes. Contact your network operator for more information on the services.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 39 FAQ I have no dialling tone after having installed my phone. How do I solve this problem? Check that you have connected your phone using the supplied line cable and not the one from any previous phone (they are often wired differently). Check that you have fully charged the handset according to the instructions given for the phone. Check that the aerial icon (radio link with the base station) is displayed.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 40 What is CNIP (Caller Name Identification)? As with the CLI service this new feature is dependent on the Network and it has to be activated by your Operator (by subscription). It will allow you to have the name of the caller displayed upon an incoming call.This service may not be available from all Operators yet.We advise you to check with your Operator. NB.
DECT 311 GB_IE.qxp 28/06/2004 Troubleshooting 14:03 www.philips.com/support PROBLEMS The does not scroll when the handset is placed on the base No dialling tone Page 41 CAUSES - Bad battery contact - Dirty contact - Battery is full - No power - Batteries are too low - You are too far from the base station No ringer SOLUTIONS - Move the handset slightly - Clean the contact with a cloth moistened with alcohol - No need to charge - Check the connections.
DECT 311 GB_IE.
DECT 311 GB_IE.qxp 28/06/2004 14:03 Page 43 Declaration of conformity We Philips Consumer Electronics Route d’Angers 72081 Le Mans Cedex 9 France declare that the products DECT 311XX are in compliance with the Annex III of the R&TTE-Directive 1999/5/EC and then with the following essential requirements : Article 3.1.a (protection of the health & the safety of the user) : EN 60950-1 (10/2001) Article 3.1.b (protection requirements with respect to electromagnetic compatibility : ETSI EN 301 489-6 V1.2.
DECT 311 GB_IE.
