Quick start guide

ManualsBrandsPhilips ManualsCordlessDECT1221S/05

Welcome

Quick start guide

Connect

Install

Enjoy

philips

Problem

! Check the connections.

! Use the line cord provided in

the box.

! Try to place the base station at

least one metre away from any

electrical appliances.

! Make sure the product is plugged.

! Recharge the batteries.

! Check you have one DSL filter

plugged directly on each line

socket used in the house.

! Check the modem and the phone

are plugged in correct filter slot

(one specific for each).

! Filters can be defective, replace

it and make another test.

Troubleshooting

For expended overview see user manual page 25.

Tip

! No dialling tone.

! Poor audio quality.

! No symbol on the display.

! No Caller ID, poor connection

quality with broadband DSL

Internet.

Need help ?

User manual

See the user manual that came with your DECT 122.

Online help

www.p4c.philips.com

To set or change the alarm clock settings

1. Press and press Down to reach CLOCK/ALARM.

2. Press and press Down to reach SET ALARM.

3. Press

, scroll to select OFF or ON ONCE or

ON DAILY.

4. Press to confirm.

If you select ON ONCE or ON DAILY :

Enter the time and press to confirm.

To rename a handset

1. Press and press Down to reach PERSONAL SET.

2. Press and press Down to reach HANDSET NAME.

3. Press and enter the name (text entry, see manual page 10).

4. Press to confirm.

TIP :When the alarm rings,

press any key to stop the alarm.

QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2

Summary of content (6 pages)

PAGE 1
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2 To set or change the alarm clock settings 1. Press and press Down to reach CLOCK/ALARM. Troubleshooting For expended overview see user manual page 25. Problem 2. Press and press Down to reach SET ALARM. ! No dialling tone. Tip ! ! 3. Press , scroll to select OFF or ON ONCE or ON DAILY. 4. Press ! Poor audio quality. ! ! No symbol on the display. ! to confirm.
PAGE 2
05.09.2005 10:16 Seite 1 1 What’s in the box A Connect 3 Connect the base station ! ! OR ! ! Handset DECT 122 Base station DECT 122 Power supply unit Line cord Quick start guide User manual Guarantee To make a call Press and dial the number. TIP :You can predial the number before seizing the line. To adjust earpiece volume while on line Press Up or Down A Install to increase or decrease the volume. Always use rechargeable batteries.
PAGE 3
05.09.2005 10:16 Seite 1 1 What’s in the box A Connect 3 Connect the base station ! ! OR ! ! Handset DECT 122 Base station DECT 122 Power supply unit Line cord Quick start guide User manual Guarantee To make a call Press and dial the number. TIP :You can predial the number before seizing the line. To adjust earpiece volume while on line Press Up or Down A Install to increase or decrease the volume. Always use rechargeable batteries.
PAGE 4
05.09.2005 10:16 Seite 1 1 What’s in the box A Connect 3 Connect the base station ! ! OR ! ! Handset DECT 122 Base station DECT 122 Power supply unit Line cord Quick start guide User manual Guarantee To make a call Press and dial the number. TIP :You can predial the number before seizing the line. To adjust earpiece volume while on line Press Up or Down A Install to increase or decrease the volume. Always use rechargeable batteries.
PAGE 5
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2 To set or change the alarm clock settings 1. Press and press Down to reach CLOCK/ALARM. Troubleshooting For expended overview see user manual page 25. Problem 2. Press and press Down to reach SET ALARM. ! No dialling tone. Tip ! ! 3. Press , scroll to select OFF or ON ONCE or ON DAILY. 4. Press ! Poor audio quality. ! ! No symbol on the display. ! to confirm.
PAGE 6
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2 To set or change the alarm clock settings 1. Press and press Down to reach CLOCK/ALARM. Troubleshooting For expended overview see user manual page 25. Problem 2. Press and press Down to reach SET ALARM. ! No dialling tone. Tip ! ! 3. Press , scroll to select OFF or ON ONCE or ON DAILY. 4. Press ! Poor audio quality. ! ! No symbol on the display. ! to confirm.