Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your wireless music system with AirPlay Introduction What's in the box What else you need Overview of the main unit Overview of the remote control 3 Before use Connect the FM antenna Connect power Install/replace the remote control batteries 4 Get started Turn on Switch modes Set the clock 5 Connect to your home Wi-Fi network Method 1: Use iOS 5 Wi-Fi network login sharing Method 2: Connect to a WPS router Method 3: Connect to a non-WPS router 6 Stream audio by AirP
1 Important i Only use this product indoors. Do not expose the product to dripping / splashing water, rain or high humidity. j Keep this product away from direct Safety Information for Europe: Know these safety symbols k Do not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including l Do not place any other electrical equipment on the product. m Do not place any sources of danger on the product (e.g.
Hearing safety Listen at a moderate volume. ( Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. ( Sound can be deceiving. Over time your hearing 'comfort level' adapts to higher volumes of sound.
Class II equipment symbol: @G, HH " no protective earth provided. Care of the environment Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to V " X" =Z polystyrene foam (buffer) and polyethylene X" % &Z Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
" "! % Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this ! < < < ! wireless performance. , < ! < < , H & & & countries. iPad is a trademark of Apple Inc. | }~ @?] H~H? G mark of the Wi-Fi Alliance.
2 Your wireless music system with AirPlay @ ! < ! " < ! at www.philips.com/welcome. H ! < ! " model and serial number of this product. The model number and serial number are on the back of the main unit. Write the numbers here: Model No. __________________________ Serial No.
What else you need ! "! , < ! ! V ( | }~ ( ! " ! = < Q < Q < iOS 4.3 (or later) or a Wi-Fi enabled PC/ Mac with iTunes 10 (or later) installed on.
Overview of the main unit a b cd e f g h j i lm n o p 10 EN q r k
a ( ( Turn on the system. Switch the system to eco power standby mode or normal standby mode. b SOURCE ( Press repeatedly to select a source. c ( !& d ( ( Stop the play of music. Access the playlist of a docked iPod/ iPhone. e Disc compartment f ( g ( ( ( Press to eject the disc from the disc compartment. ( | }~ } WIFI SETUP for more than 3 seconds to reset Wi-Fi settings. ( Connect to a USB storage device.
c CD ( Switch the source to disc. Overview of the remote control d PRESET/ALBUM / ( Skip to the previous or next album. ( Select a preset radio station. ( Navigate through iPod/iPhone playlist. a e ( ( ( b c d s r e / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. f USB ( Switch the source to USB storage device. f q g p g RDS/DISPLAY ( Synchronize the clock with an RDS radio station that transmits time signals.
q / DOCKING ( Switch the source to the audio input that is transferred through the dock. r ( !& s TUNER/MP3-LINK ( Switch the source between FM tuner or the audio input that is transferred through the MP3-LINK socket.
3 Before use Connect the FM antenna Note ( ~ ! = ( # & This product does not support MW (medium wave) radio reception. Connect the AC power adaptor to ( the DC IN " ( the wall outlet. Install/replace the remote control batteries Caution ( ] = ) " ! & % " 1 Connect the FM antenna to the FM ANT socket on the back panel.
2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note ( Before you press any function button on the remote ( ( control instead of the main unit. If you do not use the remote control in a coming long % " & ~ " ! at the IR sensor on the front of the main unit.
4 Get started Caution 1 H "! PROG/ CLOCK to activate the clock setting. » 24HOUR (24-hour time format) blinks. 2 Press / to select 24HOURor 12HOUR XJ} Z press PROG/CLOCK & » The hour digits blink. ( Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. » If you select 12HOUR as the time PM or AM is displayed.
5 Connect to your home WiFi network Before you connect this system to you home Wi-Fi network, make sure that: ( your Wi-Fi router is powered on and working properly. ( this system has been powered on and booted up successfully (see 'Turn on' on page 16). ^ ! ! remember your home Wi-Fi settings. Whenever ! ! | }~ ! you can enjoy music streamed by AirPlay.
Method 2: Connect to a WPS router 1 Press the WPS button on your home Wi-Fi router. WPS 2 4 Tap ALLOW (allow) to share your Wi-Fi settings with this system. 5 Wait less than 1 minute until the light stops * ! & ! WIFI SETUP on the top panel. WIFI SETUP Note ( H " J check the IP address of this system (see ‘Adjust system settings’ on page 37). If the IP address is displayed as "0.0.0.0" or "192.168.1.
Tip 5 Change the internal Wi-Fi settings of this system based on the settings that you wrote down on paper at step 1 (see ‘Change the internal Wi-Fi settings of this system’ on page 23). 6 Restore your Wi-Fi enabled device back to your existing home Wi-Fi settings (see ‘Restore your Wi-Fi enabled device back to your existing home Wi-Fi setting’ on page 24).
Switch this system to Assisted Wi-Fi Setup mode 1 Select Settings (Settings) -> Wi-Fi (Wi-Fi) on your iPod touch/iPhone/iPad. 2 Select Philips DCW8010 XXXXXX from the list of available networks. Note ( > ! ! " sure that the system has been booted up successfully (see 'Turn on' on page 16). Press WIFI SETUP on the top panel. » The LED indicator in the middle of WIFI SETUP button stays solid yellow.
3 Wait until successful Wi-Fi connection on your iPod touch/iPhone/iPad. » is displayed at the upper left corner of your iPod touch/iPhone/iPad. 3 Select Philips DCW8010 XXXXXX from the list of available networks. Tip ( If Philips DCW8010 XXXXXX ! scan the available Wi-Fi networks again. DCW8010 Option 2: Use your Wi-Fi enabled PC/Mac Note ( See the user manual of your PC/Mac for how to connect your PC/Mac to a Wi-Fi network.
Open the built-in web page of this system 1 2 Launch Apple Safari browser or any other internet browser on your Wi-Fi enabled device. If you use Safari on your Wi-Fi enabled PC/ Mac, you can also select 'Philips DCW8010 XXXXXX' from the Bonjour pull-down list to 1 Click -> Preferences (Preferences). » The menu for preferential settings is displayed. 2 In the Bookmarks X> Z " Include Bonjour (Include Bonjour) for Bookmarks bar (Bookmarks bar).
Change the internal Wi-Fi settings of this system ^ " ! you can change the internal Wi-Fi settings for connection of this system to your existing home Wi-Fi network. Note ( If the LED indicator in the middle of WIFI SETUP ( Note " ! Wi-Fi connection has failed. Reboot your Wi-Fi router ! ! is connected to your Wi-Fi network.
Restore your Wi-Fi enabled device back to your existing home Wi-Fi setting 2 Select your network name (SSID) from the list of available wireless networks. 3 4 ? Note ( Make sure that the settings at steps 2 to 3 below match your home Wi-Fi network settings you wrote on paper. 1 24 Select Settings (Settings) -> Wi-Fi(Wi-Fi) on your iPod touch/iPhone/iPad. ( Or open the list of available Wi-Fi networks on your PC/Mac.
6 Stream audio by AirPlay 3 Select Philips DCW8010 XXXXXX (or user customized name) from the AirPlay list. Stream audio from your iTunes music library Note ( Make sure that your iTunes host device is connected ( to the same Wi-Fi network as this system. Your iTunes device can be an iPod touch/iPhone/iPad installed with iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later). For iPhone 4S users: To ensure optimal performance , < ! ! < ^ 5.
4 !& » , ! this system. Stream from your PC/Mac 1 Launch iTunes 10 (or a later version) on your PC/Mac. 2 Click the AirPlay icon on the window. 3 Select Philips DCW8010 XXXXXX (or user customized name) from the AirPlay list. 4 !& » , ! this system.
Tip Use advanced sound settings ( When you stream audio from your iTunes music library ( <@Qq ! , < !} enabled devices (if available) at step 3 to stream music to all of them at the same time. H ! % , < ! icon may be instead of . Control play You can select different play options from either your iTunes host device or this system.
7 Use the dock 2 Push the dock tray to eject it. 3 Connect your iPod/iPhone/iPad to the dock. 4 Play a track on your iPod/iPhone/iPad. You can enjoy audio from iPod/iPhone through this system. Note ( No audio output from the headphone socket in this situation. Compatible iPod/iPhone/iPad models ! < < and iPad models.
Charge your iPod/iPhone/iPad Once the iPod/iPhone/iPad is docked and & Undock your iPod/iPhone Note ( Risk of damage to the dock or your iPod/iPhone: Do not twist or shake your iPod/iPhone/iPad. 1 2 Pull the iPod/iPhone/iPad out of the dock. Push the dock tray inwards until you hear a "click" to store it.
8 Listen to FM radio Program radio stations manually Note ( You can program a maximum of 20 preset radio stations. Tune to an FM radio station Note ( Make sure that you have connected and fully extended the FM antenna. 1 2 Press SOURCE or TUNER/MP3-LINK repeatedly to switch the source to FM tuner. » FM $ ! displayed. Press and hold / until SEARCH + or SEARCH - (Searching) is displayed. » The FM tuner tunes to a station with strong reception.
Display RDS information RDS (Radio Data System) is a service that allows FM stations to show additional information. 1 2 Tune to an RDS radio station. Press DISPLAY/RDS repeatedly to scroll through available information: ( Station name ( Program type such as NEWS X Z SPORT X Z POP M (pop music)... ( Text messages ( RDS clock ( ~ $ ! Synchronize clock with RDS You can synchronize system clock with an RDS radio station. 1 Tune to an RDS radio station that transmits time signals.
9 Play ( HDD: hard disc drive (This product can detect only a portable HDD with USB power peak current no more than 500 mA.) Note Play a disc ( Philips does not guarantee compatibility with all USB storage devices. ( ~ X ! ~ ! Z ! Caution supported. ( Never insert any object other than a disc of 12-cm diameter into the disc compartment. 1 2 Press SOURCE repeatedly to switch the source to DISC. ( You can also press CD to switch the source.
Control play ! Buttons / / REPEAT/SHUFFLE " !& Functions Pause or resume play. Stop play. Skip to the previous or next track. Press and hold to rewind a track or search forward fast within a track. Skip to the previous or next album when one or more album exit. Enter the number of a track to play it. Select an available play mode.
( 10 Other features SLEEP/SNOOZE until ALM STOP is displayed. Tip Set alarm timer ( you can set the hour/minute digits by the numeric keypad. You can use this system as an alarm clock. Note Set sleep timer ( Make sure that you have set the clock correctly. 1 H "! SLEEP/SNOOZE until DISC blinks. 2 Press / alarm source. 3 Press SLEEP/SNOOZE & » The hour digits blink.
3 Play the external device. (See the user manual of external device). Listen through headphone Plug a headphone with 3.5-mm plug into the socket on the top panel. Note ( No audio output from the headphone socket when you play the playlist of a docked iPod/iPhone/iPad. Listen through the speakers instead.
11 Adjust sound The following operations are applicable to all supported media. Adjust volume level ( ( ^ VOL +/repeatedly. ^ VOL+/VOLrepeatedly. Mute sound ( Press to mute or restore the sound. Adjust default sound settings 1 Press SOUND repeatedly to select one of the setting menus. ( DSCV $ & ( DBB: Select a DBB sound effect or disable it. ( FULL SOUND: Enable to enjoy fullrange sound output. 2 Press 36 EN / to select an option.
12 Adjust system settings 1 Press SETTINGS to access the menu of system settings. » WIFI is displayed. 2 Press / to select a menu option. ( WIFI IP ADDR DIMMER NET RST FAC RST VERSION 3 Press to view system status or change system settings. ( } % . Menu Option Function Remarks WIFI Display the status of connection between this system and your home Wi-Fi network. Display the IP address of this system in your home Wi-Fi network.
13 Update firmware " Warning % ! < ! ! & Please register your product at www.philips. com/welcome for information about the latest & ( Make sure that the power is not interrupted during & Note ( If you use an internet browser other than Apple Safari ! <@Qq " | }~ H< this system.
Note ( H ( ! ! " % procedures again. , ! " | }~ ! | }~ network for this system again (see 'Connect to your home Wi-Fi network' on page 17).
14 Product information Signal to Noise Ratio Speakers Speaker Impedance Speaker Driver Note ( Product information is subject to change without prior notice. >45 dB Sensitivity 8 Ohm 2 X 2.75" full range speaker > 82 dB/m/W Wireless # $ Rated output power ~ $ ! 40 W K } J ±3 dB > ]q Signal-to-noise ratio MP3 LINK input Wireless standard Wireless security ~ $ ! range PBC (one button push) 802.
USB playability information RDS program types Compatible USB devices: ( > * ! X > J& >&Z ( > * ! X > J& >&Z ( ! X $ card reader to work with this unit) NO TYPE NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M MOR M GH q CLASSICS OTHER M WEATHER FINANCE CHILDREN Supported formats: ( > ! ~, J ~, K ~, J X V J "! Z ( MP3 bit rate (data rate): 32-320 Kbps and variable bit rate (
15 Troubleshooting Warning ( Never remove the casing of this product. ! % % ! ! & H ! " " $ % & H " % < | " X & & Q Z& | ! < "! " " available. Problem Solution No power.
Problem Solution @ ! USB storage device. Radio reception is poor. q & q $ ! = = & Increase the distance between the system and other electrical appliances. Fully extend the antenna and adjust its position. Connect an outdoor FM antenna instead. Set the clock correctly. Switch on the timer. Power is interrupted or cut off. Reset the clock/timer.
Problem Solution Occasional breaking of AirPlay music streaming Do one or all of the following: ( Move this system closer to your Wi-Fi router. ( Keep the space between this system and your Wi-Fi router clear of any obstacle. ( Do not use Wi-Fi channel that is overlapped by the nearby Wi-Fi network. ( Check whether your network speed is fast enough (in cases where % , < ! may be affected). Turn off the other devices connected to your home router.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DCW8010_12_UM_V1.
