User Manual

Introduction:

Philips strives to continually bring you the best experience from our products. To obtain the optimal

playback and latest features, you are highly recommended to upgrade the firmware of your player.

Preparation for firmware upgrade:

 A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).

 A USB flash device with enough free space to hold the firmware file. An empty one is advised to

avoid a crash among files.

Upgrade Procedure:

Step 1: Check your current firmware version

1. Turn on the player.

2. Press “Power” button on top of the device to enter Standby mode.

3. Hold “Source” button for more than 3 seconds and then press “play/pause”.

Note: Make sure you don’t release the “Source” button when you press “play/pause”.

4. The firmware version will be displayed on your player.

5. Compare the firmware version displayed to the latest version. If the existing firmware in your

player is of an earlier version than the new release, please proceed to Step 2.

Otherwise, the latest firmware is installed and hence an upgrade is not needed.

Step 2: Format a USB flash device via Windows OS

Note: The data stored in the USB flash device would be deleted after formatting. Backup the data if

needed.

1. Insert the USB flash device into the USB slot of the computer.

2. Select the USB flash drive.

3. Right click on the USB flash drive and select “Format”

4. On the pop-up box, make sure you follow the instructions below:

a. Select “FAT32” or “Default” for File system.

b. Select “Default allocation size” for Allocation unit size.

c. Deselect “Quick Format”

1. Check your current

firmware version

2. Format a USB flash

device via Windows OS

2. Upgrade the firmware

for your player

3. Confirm upgrade

successfulness

PAGE 1
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to upgrade the firmware of your player. Preparation for firmware upgrade:   A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows). A USB flash device with enough free space to hold the firmware file. An empty one is advised to avoid a crash among files. Upgrade Procedure: 1.
PAGE 2
5. Click on “Start” to start USB flash drive formatting. Step 3: Upgrade the firmware for your player Warning: DO NOT turn off the device or remove the USB flash device during the firmware upgrade procedure. If an error occurs during the upgrade, retry the procedure. If you need further assistance, please call your local Philips Consumer Care Center or use our Live Chat function. 1. Extract the firmware upgrade file from the downloaded firmware package.