User manual

7EN
Set clock
Note
• You can set the clock in standby mode only.
1 In standby mode, press and hold CLOCK
to activate the clock setting mode.
2 Press PRESET/ALBUM / to select 12
hour or 24 hour format.
3 Press CLOCKtoconrm.
» The hour digits begin to blink.
4 Press PRESET/ALBUM / to set the
hour.
5 Press CLOCKtoconrm.
» The minute digits begin to blink.
6 Press PRESET/ALBUM / to set the
minute.
7 Press CLOCKtoconrm.
Note
• You can also press VOL -/+ on remote control or main
unit to set hour format/hour/minute.
• To exit clock setting mode without storing, press
/MENU.
• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
• You can press CLOCK to view the clock in any source
mode.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1 Turn on the unit.
2 Press SRC to select TUNER source.
» [AUTO INSTALL -- PRESS PLAY --
STOP CANCEL] (press
to start
automatic installation, or press
to
cancel)isdisplayed.
3 Press .
» The unit automatically stores radio
stationswithsufcientsignalstrength.
» After all available radio stations are
stored,therststoredradiostationis
broadcast automatically.
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby
• Press again to switch the unit to standby
mode.
» Theclock(ifset)appearsonthe
display panel.
Switch to ECO Power mode:
• Press and hold
for more than three
seconds.
» [ECOPOWER](EcoPower)is
displayedbriey.
Tip
• The unit switches to Eco Power mode after 15 minutes
in standby mode if no Apple device is docked to the
unit.
• Press and hold cannot switch the unit to Eco standby
mode if there is Apple device docked to the unit.
• Press and hold to switch the unit to standby mode if
the unit is in working mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold
to switch the unit to Eco Power/
standby mode.