Always there to help you Register your product and get support at www.philips.
Contents 1 Safety and Notice Safety Notice 2 Your Micro System Introduction What's in the box Overview of the main unit 3 Get started Connect power Prepare the remote control Set clock Store radio stations automatically Turn on Demonstrate the unit's features 4 Play Play a disc Play from USB 2 2 2 3 3 3 4 6 6 6 7 7 7 8 10 10 10 10 6 Listen to radio 11 11 11 11 11 11 7 Adjust sound 12 12 12 12 Tune to a radio station Program radio stations automatically Program radio stations manually Select a p
1 Safety and Notice Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Safety Safety Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment.
a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.
Overview of the main unit m a b c d e f g h l k j i o n a AUDIO IN • Connect an external audio device. j b Dock for iPod/iPhone c Disc compartment d • Turn on the unit, switch to Standby mode, or switch to Eco Power mode. e SRC • Select a source: DISC, USB, TUNER, ipod_iphone, or AUDIO IN. f g h • Eject the disc. • • • • Stop play. Erase a program. Access the iPod/iPhone menu. In standby mode, turn on/off feature demonstration. • Start or pause play.
Overview of the remote control a b c d r e g q h p o n m l i j k b h VOL -/+ • Adjust volume. • Adjust time. i MUTE • Mute or restore volume. k CLOCK • Set clock in standby mode. • Display the time in any source mode. l SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. m REPEAT/SHUFFLE • Select the repeat play mode. • Select the random play mode except in IPOD IPHONE mode. • Turn on the unit, or switch to Standby mode, or switch to Eco Power mode.
3 Get started Prepare the remote control Caution Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.
Set clock 2 Press SRC to select TUNER source. »» [AUTO INSTALL -- PRESS PLAY -STOP CANCEL] (press to start automatic installation, or press to cancel) is displayed. 3 Press . »» The unit automatically stores radio stations with sufficient signal strength. »» After all available radio stations are stored, the first stored radio station is broadcast automatically. Note •• You can set the clock in standby mode only. 1 In standby mode, press and hold CLOCK to activate the clock setting mode.
Tip •• The power indicator lights up when the unit is in Eco 4 Play Power mode. Demonstrate the unit's features • In standby mode, press /MENU. [WELCOME TO PHILIPS] (welcome to Philips) scrolls from the right to the left on the display, and then [DEMO ON] (demo on) is displayed briefly. »» This system's features are displayed one by one. • To turn off the demonstration, press /MENU again. Note Play a disc Caution •• Do not insert disc of 8 cm diameter. 1 Press SRC repeatedly to select DISC source.
• Program tracks Note •• You can program tracks only when the play stops. • 2 REP ALB: all the tracks in the album are played repeatedly. SHUF: all tracks are played randomly. To resume normal play, press REPEAT/ SHUFFLE repeatedly until no option is displayed. You can program a maximum of 20 tracks. 1 2 Press PROG to activate the program mode. »» [PROG] (program) is displayed. For MP3/WMA tracks, press PRESET/ALBUM / to select an album. 3 Press / to select a track, then press PROG to confirm.
5 Play iPod/iPhone When the iPod/iPhone is docked on the main unit, you can listen to music from the speakers. • To navigate the menu, press /MENU, and press PRESET/ALBUM / to select an option, and then press OK to confirm. Tip •• To search during play, you can also press and hold Compatible iPod/iPhone Apple iPod and iPhone models with a lightning dock connector: • iPod touch 5th generation • iPod nano 7th generation • iPhone 5 Play an iPod/iPhone 1 Insert the iPod/iPhone in the dock.
6 Listen to radio Tip •• For optimal reception, fully extend and adjust the position of the antenna. Tune to a radio station 1 Press SRC repeatedly to select the tuner source. 2 Press and hold / for more than 2 seconds. »» [SEARCH] (search) is displayed. »» The radio tunes to a station with strong reception automatically. 3 Program radio stations manually You can program a maximum of 20 preset radio stations (FM). 1 2 Tune to a radio station.
7 Adjust sound 8 Other features Adjust volume Set the sleep timer • During play, press VOL +/- to increase/ decrease the volume. Select a preset sound effect • During play, press SOUND repeatedly to select: • [BALANCED] (balanced) • [WARM] (warm) • [BRIGHT] (bright) • [POWERFUL] (powerful) • [CLEAR] (clear) Mute sound • During play, press MUTE to mute/unmute sound. This unit can switch to standby automatically after a set period of time.
4 Press SRC repeatedly to select a source: DISC, USB, TUNER, iPod_iPhone or PLAYLIST. 5 Press SLEEP/TIMER to confirm. »» The hour digits begin to blink. 6 Press PRESET/ALBUM hour. 7 Press SLEEP/TIMER to confirm. »» The minute digits begin to blink. 8 Press PRESET/ALBUM minute. 9 Press SLEEP/TIMER to confirm. »» The [VOL] (volume) begins to blink. 10 Press PRESET/ALBUM / to adjust the volume, then press SLEEP/TIMER to confirm. »» The timer is set and activated.
3 Play the external audio device. Adjust display brightness Note •• You can adjust the display brightness in standby mode only. In standby mode, press RDS/DISPLAY repeatedly to adjust display brightness.
9 Product information Sensitivity Note •• Product information is subject to change without prior - Mono, 26dB S/N Ratio < 22 dBf - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio < 43 dBf < 28 dBf < 2% > 55 dB notice.
• • • • • • WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 to v2.3 File name in Unicode UTF8 (maximum length: 16 bytes) Supported MP3 disc formats • • • • • ISO9660, Joliet Maximum title number: 999 (depending on file name length) Maximum album number: 99 Supported sampling frequencies: 32 kHz, 44.
10 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that the unit is nearby and the model number and serial number are available.
18 EN
EN 19
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DCM3155_93_UM_V1.
