Register your product and get support at www.philips.
1 2 3 4 5 6 7 Important 4 Safety Notice 4 5 Your product 7 Introduction What’s in the box Overview of the main unit Overview of the remote control 7 7 8 9 Get started 10 Placement Prepare the remote control Connect FM antenna Connect power Auto install radio stations Set clock Turn on 10 10 11 11 11 11 12 Play 12 Play disc Play from USB Pause/resume play Skip to a track Search within a track Display play information Program tracks 12 12 12 12 13 13 13 Adjus
1 Important Safety g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. Batteries (battery pack or batteries installed) shall not be exposed to G H * or the like. o Apparatus shall not be exposed to dripping or splashing.
This product complies with the radio ) % J Community. Your product is designed and manufactured ( < ) % # % * which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
E n glish 2 Your product Congratulations on your purchase, and ( % Q X " & % support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, iPod/iPhone/iPad, USB devices, and other external devices, or listen to radio stations. The unit offers Digital Sound Control (DSC) and Dynamic Bass Boost (DBB) to enrich sound.
Overview of the main unit l m n MP3-LINK h i d e f g FM ANT o j k a Turn on the unit, or switch to standby mode, or switch to Eco Power standby. b SOURCE Select a source: CD, FM radio, iPod/ iPhone/iPad, USB, or MP3 link. c / Skip to the previous/next track. Search within a track. Tune to a radio station. /OK Start or pause play. [ % = For FM radio, select stereo or mono sound output. d e /MENU Stop play. Access the iPod/iPhone menu.
b c CD Select disc source. d a / b c CD FM PRESET/ALBUM s r q d Mute or restore volume. E n glish Overview of the remote control OK Skip to the previous/next track. Search within a track. Tune to a radio station. e USB/MP3 LINK Select USB device source. Select external audio device source. f RDS/DISPLAY Select RDS broadcast information. Select display information during play. g MP 3 LINK e DOCK USB MENU DISPLAY f p o RDS g h h VOL +/ Adjust volume.
p DOCK Select iPod/iPhone/iPad source. q OK [ % 3 Get started = r PRESET/ALBUM / Skip to the previous/next album. Select a preset radio station. Navigate the iPod/iPhone/iPad menu. s FM Select FM radio source. Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply. » [AUTO INSTALL - PRESS PLAY KEY](auto install - press play key) is displayed. 2 Press on the main unit to start installation. » The unit automatically stores radio ( < < = Note If you are not going to use the remote control for a long time, remove the batteries.
8 Press PROG/CLOCK SET %= 4 Play Turn on Play disc 1 1 2 Press CD to select the disc source. 3 Insert a disc with the printed side facing outward, and then press to close the disc compartment. 4 If the disc doesn’t play, press To stop play, press . Press . » The unit switches to the last selected source. Switch to standby 1 When the unit is turned on, press to switch the unit to standby. In standby, press and hold to switch between normal standby and Eco power standby.
To select a track directly, you can also press a key on the numerical keypad. For MP3 disc and USB: 1 2 Press Press = You can program a maximum of 20 tracks. to select an album or folder. / to select previous/next track Search within a track 1 2 During play, press and hold / . Release to resume normal play. Display play information 1 Program tracks E n glish During play, press DISPLAY repeatedly to select different play information.
5 Adjust sound 6 Listen to radio Adjust volume Tune to a radio station 1 1 2 During play, press VOL +/- to increase/ decrease the volume. Select a preset sound effect 1 During play, press DSC repeatedly to select a preset sound setting. Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Enhance bass 1 Press FM. During play, press DBB to turn on or off dynamic bass enhancement.
7 Play iPod/ iPhone/iPad E n glish Program radio stations manually Note You can program a maximum of 20 preset radio stations. 1 2 Tune to a radio station. Press PROG/CLOCK SET to activate program mode. » [PROG] (program) begins to blink. 3 Press to allocate a number (1 to 20) to this radio station, and then press PROG/ CLOCK SET %= 4 Repeat the previous steps to program other stations. Note To overwrite a programmed station, store another station in its place.
Install the rubber pad If necessary, install the supplied rubber pad to keep the iPad/iPad 2 stable before you place the iPad/iPad 2. 8 Other features Set the alarm timer This unit can be used as an alarm clock. The disc/radio/USB/docked product is activated to play at a preset time. 1 Make sure that you have set the clock correctly. 2 Press to switch the unit to standby. Make sure that the clock is displayed (see “Turn on” > “Switch to standby”). 3 Press and hold SLEEP/TIMER.
This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, is displayed. 9 Product information E n glish Set the sleep timer Note Product information is subject to change without prior notice. To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. » When sleep timer is deactivated, disappears on the display.
General information AC power Operation Power Consumption Eco Standby Power Consumption USB Direct Dimensions - Main Unit (W x H x D) Weight - Main Unit AC 100-240V~, 50/60 Hz 32 W Supported MP3 disc formats <1 W Version 2.0/1.1 500 x 217 x 98 mm 2.
% % Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before ) < H = & % % unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power % Ensure that the AC power plug of the unit is connected properly.
Language Code Inupiaq Irish Íslenska Italiano Ivrit Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Kernewek Khmer Kinyarwanda Kirghiz Komi Korean Kuanyama; Kwanyama Kurdish Lao Latina Latvian Letzeburgesch; Limburgan; Limburger Lingala Lithuanian Luxembourgish; Macedonian Malagasy Magyar Malayalam Maltese Manx Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho; Navajo Ndebele, North Ndebele, South Ndonga Nederlands Nepali Norsk Northern Sami North Ndebele Norwegian Nynorsk; Occitan; Provencal
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCM3060_12_UM_V3.
