Quick Install Guide

155 mm (6.10")
Note for mounting
To secure the mounting on wall, concrete wall is required.
M
Use screws to mount the main unit on the wall
1. Use this sheet as a template. Mark the position where you want to hang the unit on the wall (as shown above) and then drill two 6mm diameter holes.
2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave the screws 5mm proud of the wall.
3. Hang the unit on the fastening screws.
Wall mounting instructions
Drill holes on wall at hole positions
marked.*
DCM276_05_Wall mounting.indd 4DCM276_05_Wall mounting.indd 4 6/17/2009 9:34:45 AM6/17/2009 9:34:45 AM