Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 Know these safety symbols Important safety instructions Hearing safety 2 2 3 2 Your micro music system 4 Introduction What's in the box Overview of the main unit Overview of the remote control 4 4 4 5 3 Before use 7 4 Get started 8 Connect the FM antenna Connect power Install the remote control battery Turn on Set the clock Select a source Adjust the brightness of LCD display 5 Play from hard media Play a disc Play from a USB storage device Control play Program tracks 7 7
1 Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Know these safety symbols This 'bolt of lightning' indicates uninsulated material within your unit may cause an electric shock. For the safety of everyone in your household, please do not remove product covering.
Risk of contamination! • Remove the battery if it is exhausted or if the remote control is not to be used for an extended period of time. • Batteries contain chemical substances, they should be disposed of properly. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this apparatus.
2 Your micro music system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
c d e • Start, pause, or resume play. • • Stop the play of music. Access the playlist of a docked iPod/ iPhone. • Connect a compatible USB storage device for music play. Connect a compatible USB device for charging. • f Disc compartment g h • • • • Press to eject the disc from the disc compartment. / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. q FM ANT • Connect to the FM antenna.
/MENU Stop the play of music. Access the playlist of iPod/iPhone. c DOCK • Connect a compatible iPod/iPhone/ iPad for music play. p d FM/ CD • Switch the source to FM tuner or the disc in the disc compartment.. q OK • Confirm the current option. e PRESET/ALBUM / • Skip to the previous or next album. • Select a preset radio station. • Navigate through iPod/iPhone playlist. f • • • / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station.
3 Before use Connect the FM antenna DC IN Note •• For optimal reception, fully extend the antenna and adjust its position, or connect an outdoor antenna. •• This product does not support AM (amplitude modulation) radio reception. Connect the AC power adaptor between • the DC IN socket on the back panel, and • the power supply. »» blinks. Install the remote control battery a c b Connect the FM antenna to the product. Connect power Note 1 2 3 Open the battery compartment.
4 Get started • Caution Press to switch this product • between the working mode and the normal standby mode, or • from the eco power standby mode to the working mode. •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
• • : the disc in the disc compartment : .mp3 files stored on the connected USB storage device • : the FM tuner You can also press source buttons on the remote control to select a source. • FM/ CD: the FM tuner or the disc in the disc compartment • DOCK: the playlist on the connected iPhone/iPod/iPad • AUDIO IN/USB: the audio input through the AUDIO IN socket, or the .
/ Note •• Gibson Innovations does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file system is not supported. / REPEAT/SHUFFLE 1 2 Connect the USB storage device to the socket. Press USB or SOURCE to switch the source to . »» Play starts automatically. If play does not start automatically, 1 2 3 Press / to select a folder. Press / Press to start play. to select a file. Control play During play, follow the instructions below to control play.
6 Use the dock You can enjoy audio from iPod/iPhone/iPad through this product. Note •• There is no audio output from the headphone socket of the connected iPod/iPhone/iPad. 2 Eject the dock. Compatible iPod/iPhone/iPad models This product supports the following iPod, iPhone, and iPad models.
4 Connect your iPod/iPhone/iPad to the dock. »» Once the iPod/iPhone/iPad is recognized, the charging starts. Unload your iPod/iPhone/iPad Note •• Risk of damage to the dock or your iPod/iPhone/iPad: Do not twist or shake your iPod/iPhone/iPad during unloading. 5 Play a track on your iPod/iPhone/iPad. Buttons MENU/ / / Functions Start, pause, or resume play. Access the playlist of iPod/iPhone. Navigate through the playlist of iPod/iPhone. Skip to the previous/next track.
7 Listen to FM radio Program radio stations automatically Note •• You can program a maximum of 20 preset radio stations. Tune to an FM radio station Note •• Make sure that you have connected and fully extended the FM antenna. Press and hold PROG until the frequency starts to change. »» All available stations are programmed in the order of waveband reception strength. »» The first programed radio station is broadcast automatically.
8 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 9 Other features Use the alarm timer This product can be used as an alarm clock. You can select the disc, iPod/iPhone/iPad library, FM radio station, or .mp3 files stored on a USB storage device as alarm source. Note Adjust volume level • • On the remote control, press VOL +/repeatedly.
Deactivate/Re-activate the alarm timer In standby mode, press SLEEP/TIMER. »» If TIMER disappears, the alarm timer is deactivated. Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. »» If TIMER is displayed, the alarm timer is activated. Stop an alarm When an alarm rings, press to stop it.
Charge your USB device You can charge your USB device, for example, smart phone, with this product. Note •• The output voltage through the USB socket is 5 V with output currency 0.5 A. •• Gibson Innovations does not guarantee the compatibility with all USB devices. Connect your USB device to this product with USB cable. 10 Product information Note •• Product information is subject to change without prior notice.
• Disc Laser type Disc diameter Support discs Audio DAC Total harmonic distortion Frequency response S/N Ratio Semiconductor 12 cm CD-DA, CD-R, CD-RW, MP3-CD 24 Bits, 44.1 kHz < 1.5% (1 kHz) 60 Hz - 16 kHz (44.1 kHz) > 55 dB Tuner (FM) Tuning range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search selectivity Total harmonic distortion Signal-to-noise ratio 87.
11 Troubleshooting Warning •• Never remove the casing of this product. • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Problem Solution Remote control does not work. Before you press any function button, select the correct source with the remote control instead of the main unit. Reduce the distance between the remote control and the main unit. Insert the battery with its polarity (+/– signs) aligned as indicated. Replace the battery. Aim the remote control directly at the sensor on the front panel of the main unit. Insert a disc. Make sure that you place the disc with its label facing upwards.
Trademark notice When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. DCM2260_DCM2260W_12_UM_V3.
