Register your product and get support at www.philips.
1 2 3 4 5 6 Important 4 Safety Notice 4 4 Your Micro Music System 6 Introduction What’s in the box Overview of the main unit Overview of the remote control 6 6 7 8 Get started 10 Connect speakers Connect power Prepare the remote control Demonstrate the unit’s features Connect FM aerial Set clock Turn on Store radio stations automatically 10 10 10 11 11 11 12 12 Play 12 Basic play operations Play from disc Play from USB Adjust sound 12 13 13 13 Play iPod/iPhone/iPad 14 iPod/iPhone/iPa
1 Important Safety Do no place any source of danger on the Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Hearing Safety Caution To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Your Micro Music System Congratulations on your purchase, and - ! J X ( * * ! support that Philips offers, register your product at www.philips.com/welcome.
E n gl i sh Overview of the main unit a o b n c d e f m g h l i j a Dock for iPod/iPhone/iPad b Disc compartment Hold the disc. c USB socket. d MP3 LINK Connect external audio device. k g IR sensor Detect signals from the remote control. Always point the remote control at the IR sensor. h SOURCE Select a source. i e Headphone socket. / Skip to previous/next track. Search within a track/disc. Tune to a radio station. Start or pause play. Stop play.
l - PRESET/ALBUM+ Skip to previous/next album. Select a preset radio station. Navigate through iPod/iPhone/iPad menu. m Display panel Show current status. n Open or close the disc tray. o VOLUME Adjust volume. Adjust time.
o Turn on the unit. Switch to standby or Eco Power standby mode. b Mute volume. c CD Select CD source. d / Skip to previous/next track. Search within a track/disc. Tune to a radio station. e USB/ MP3 LINK f RDS/DISPLAY For selected FM radio stations: display RDS information. Synchronize clock with RDS station. Display play information. /MENU Stop play. Erase a program. Access iPod/iPhone/iPad menu. E n gl i sh a p DOCK Select the dock source for iPod/ iPhone/iPad.
3 Get started Connect power Caution Caution Risk of product damage! Ensure that the power supply Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
Connect FM aerial b FM E n gl i sh a c Tip For optimal reception, fully extend and adjust the position of the antenna. For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL socket. Note If you are not going to use the remote control for a long time, remove the batteries. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed of properly.
Note 4 Play To exit clock setting mode without storing, press . If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Basic play operations You can control play through following operations. Turn on 1 Press . » The unit switches to the last selected source. Switch to standby mode 1 Press for over 3 seconds to switch the unit to Eco Power Standby mode. » The backlight on the display panel turns off.
Adjust sound 1 2 During play, you can adjust volume through following operations. Press CD to select the CD source. Press OPEN/CLOSE. » The disc compartment opens. 3 Place a disc with the printed side facing up, then press . 4 Play starts automatically. If play does not start, press to select a track, then press Key VOL +/DBB / . DSC Play from USB E n gl i sh Play from disc Function To increase/decrease the volume. To mute/restore sound. To turn on or off dynamic bass enhancement.
5 Play iPod/ iPhone/iPad This system is equipped with a dock for iPod/ iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers. Load the iPod/iPhone/iPad 1 Push the lock key to open the lid of the dock. 2 Load the iPod/iPhone/iPad onto the dock.
When the unit is connected to power, the docked iPod/iPhone/iPad starts charging. Tip 6 Listen to FM radio E n gl i sh Charge the iPod/iPhone/iPad Tune to FM radio stations For certain iPod models, it may take up to a minute before the charging indication appears. Note Ensure that you have connected and fully extended the supplied FM antenna. Remove the iPod/iPhone/iPad 1 Unload the iPod/iPhone/iPad from the dock. 2 Flip down the lid to hide the dock. 1 2 Press FM. Press and hold station.
Program radio stations manually 2 Press RDS repeatedly to scroll through the * - * ! * ' » Station name » Program type such as [NEWS] - ; [SPORT] ; [POP M] (pop ! Note You can program a maximum of 20 preset radio » RDS clock stations. » Frequency 1 2 3 4 Tune to a radio station. Press PROG/CLOCK SETto activate programming mode.
Activate/deactivate alarm timer 1 Set alarm timer This unit can be used as an alarm clock. You can select DISC, iPod/iPhone/iPad, playlist, TUNER or USB as alarm source. Note Alarm timer is not available in MP3 LINK mode. If DISC/USB/iPod/iPhone/iPad source is selected, yet no Note Make sure that you have set the time correctly. 1 2 In standby mode, press and hold SLEEP/ TIMER until [TIMER SET] ! on the display. » [SELECT SOURCE] scrolls on the screen.
1 Connect the audio device. For audio device with headphone sockets: Connect MP3 Link cable to the MP3 LINK socket and to the headphone socket on the audio device. 2 3 Select MP3 LINK source. 8 Product information Note Play the device. Product information is subject to change without prior notice. Listen through headphone 1 Plug a headphone into the unit.
Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.
9 Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site --- !`- ! " contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Remote control does not work \ * * ; select the correct source with the remote control instead of the main unit. Reduce the distance between the remote control and the unit. Insert the battery with its polarities (+/– Replace the battery. Aim the remote control directly at the sensor on the front of the unit.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCM2020_12_UM_V2.
