Register your product and get support at www.philips.
1 2 3 4 5 6 Important 4 Your Micro Music System 6 Safety Notice Introduction What’s in the box Overview of the main unit Overview of the remote control Get started Connect speakers Connect power Prepare the remote control Demonstrate the unit’s features Connect FM aerial Set clock Turn on Store radio stations automatically 4 4 6 6 7 8 10 10 10 10 11 11 11 12 12 Play 12 Play iPod/iPhone/iPad 14 Listen to FM radio 15 Basic play operations Play from disc Play from USB Adjust sound iPod/
1 Important Safety • • Do no place any source of danger on the device (e.g. liquid filled objects. lit candles). Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Hearing Safety Caution •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
English Overview of the main unit a o b n c d e f m g h l i j a Dock for iPod/iPhone/iPad b Disc compartment • Hold the disc. c • USB socket. d MP3 LINK • Connect external audio device. e f • Headphone socket. • Turn on the apparatus, switch to standby mode, or Eco Power standby mode. k g IR sensor • Detect signals from the remote control. Always point the remote control at the IR sensor. h SOURCE • Select a source. i j k • • • / Skip to previous/next track. Search within a track/disc.
l - PRESET/ALBUM+ • Skip to previous/next album. • Select a preset radio station. • Navigate through iPod/iPhone/iPad menu. m Display panel • Show current status. n • Open or close the disc tray. o VOLUME • Adjust volume. • Adjust time.
b • • Turn on the unit. Switch to standby or Eco Power standby mode. • Mute volume. c CD • Select CD source. d • • • / Skip to previous/next track. Search within a track/disc. Tune to a radio station. e USB/ MP3 LINK f RDS/DISPLAY • For selected FM radio stations: display RDS information. • Synchronize clock with RDS station. • Display play information. g • o • • • /MENU Stop play. Erase a program. Access iPod/iPhone/iPad menu. English a p DOCK • Select the dock source for iPod/ iPhone/iPad.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Connect FM aerial b English a FM c Tip •• For optimal reception, fully extend and adjust the position of the antenna. •• For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL socket. Note •• If you are not going to use the remote control for a long time, remove the batteries. •• Do not use old and new or different types of batteries in combination. •• Batteries contain chemical substances, so they should be disposed of properly.
Note •• To exit clock setting mode without storing, press . •• If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Turn on 1 Press . »» The unit switches to the last selected source. Switch to standby mode 1 Press for over 3 seconds to switch the unit to Eco Power Standby mode. »» The backlight on the display panel turns off. To switch the unit to standby mode: 1 In Eco Power Standby mode, press for over 3 seconds.
Adjust sound 1 2 During play, you can adjust volume through following operations. 3 4 Press CD to select the CD source. Press OPEN/CLOSE. »» The disc compartment opens. Place a disc with the printed side facing up, then press . Play starts automatically. • If play does not start, press to select a track, then press / . Play from USB Key VOL +/DBB DSC English Play from disc Function To increase/decrease the volume. To mute/restore sound. To turn on or off dynamic bass enhancement.
5 Play iPod/ iPhone/iPad This system is equipped with a dock for iPod/ iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers. Load the iPod/iPhone/iPad 1 2 Push the lock key to open the lid of the dock. Load the iPod/iPhone/iPad onto the dock.
When the unit is connected to power, the docked iPod/iPhone/iPad starts charging. Tip 6 Listen to FM radio English Charge the iPod/iPhone/iPad Tune to FM radio stations •• For certain iPod models, it may take up to a minute before the charging indication appears. Note •• Ensure that you have connected and fully extended the supplied FM antenna. Remove the iPod/iPhone/iPad 1 2 Unload the iPod/iPhone/iPad from the dock. Flip down the lid to hide the dock. 1 2 3 4 Press FM. Press and hold station.
Program radio stations manually 2 »» Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)... Note •• You can program a maximum of 20 preset radio »» RDS clock stations. 1 2 3 4 Press RDS repeatedly to scroll through the following information (if available): »» Station name »» Frequency Tune to a radio station. Press PROG/CLOCK SETto activate programming mode. Press / to select a number from 1–20 for this radio station, then press PROG/CLOCK SET to confirm.
Activate/deactivate alarm timer 1 Set alarm timer This unit can be used as an alarm clock. You can select DISC, iPod/iPhone/iPad, playlist, TUNER or USB as alarm source. Note •• Make sure that you have set the time correctly. 1 2 3 4 5 6 In standby mode, press and hold SLEEP/ TIMER until [TIMER SET](timer set) scrolls on the display. »» [SELECT SOURCE] (select source) scrolls on the screen. Press SOURCE repeatedly to select a source: DISC, USB, TUNER, iPod/iPhone/ iPad or playlist.
Listen through headphone 1 Plug a headphone into the unit. socket on the 8 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio MP3-Link Input 2X10W RMS 40Hz-20kHZ, ±3dB >77dB 600mV RMS 22 kohm Disc Laser Type Disc Diameter Support Disc Audio DAC Total Harmonic Distortion Frequency Response S/N Ratio 18 EN Semiconductor 12cm/8cm CD-DA, CD-R, CD-RW, MP3-CD, WMA-CD 24Bits / 44.
Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.
9 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Remote control does not work • Before you press any function button, first select the correct source with the remote control instead of the main unit. • Reduce the distance between the remote control and the unit. • Insert the battery with its polarities (+/– signs) aligned as indicated. • Replace the battery. • Aim the remote control directly at the sensor on the front of the unit. the video content onto a supported disc to play these files.
© 2012 Koninklijke Philips Electronics N.V. All rights reserved. DCM2020_12_UM_V3.
