Register your product and get support at www.philips.com/welcome DCM186B EN User manual DCM186B_79_UM_V1.0.
Contents 1 Important Safety Notice 2 Your Micro Hi-Fi System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Connect speakers Connect power 4 Get started Prepare the remote control Set clock Turn on 5 Play disc Play options 6 Play from iPod/iPhone Compatible iPod/iPhone Listen to iPod/iPhone through this player Charge the iPod/iPhone Remove the iPod/iPhone 7 Adjust volume level and sound effect Adjust volume level Enhance bass Select a preset so
1 Important Safety Know these safety symbols h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer.
• • Remove batteries when the unit is not used for a long time. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). q Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
2 Your Micro HiFi System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome.
Overview of the main unit a b l c k % j d DSC e g i h f g 8 EN DCM186B_79_UM_V1.0.
a OPEN/CLOSE • Open or close the disc tray. b POWER • Switch on the unit • Switch to standby mode. c SOURCE • Select a source: Disc, Tuner, MP3 LINK, or iPod/iPhone. d e • Start or pause play. • Stop play or erase a program. f MP3 LINK • Jack for external audio device. g iPod/iPhone dock h DSC • Select a preset sound setting: POP, JAZZ, CLASSIC or ROCK. i MODE • Select repeat/shuffle play mode.
d CLOCK/DISPLAY • Set the clock. • View the clock. • During play, select display information. e MENU • Access the iPod/iPhone menu. f g • • • • Connect speakers Note / • 3 Connect Navigate through the iPod/iPhone menu. / Fast reverse or fast forward within a track or disc. Skip to the previous/next track. Tune to a radio station. Adjust time. •• For optimal sound, use the supplied speakers only. •• Connect only speakers with impedance that is the same or higher than the supplied speakers.
Connect power 4 Get started Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi-Fi system. •• Before connecting the AC power cord, make sure that you have completed all other connections. 1 Connect the AC power cord to the power outlet. Caution •• Use the controls only as stated in this user manual. •• Always follow the instructions in this chapter in sequence.
Note •• If you are not going to use the remote control for a 5 Play disc long time, remove the batteries. •• Do not use old and new or different types of batteries Caution in combination. •• Batteries contain chemical substances, so they should be disposed of properly. accessories such as disc stabilizer rings or disc treatment sheets. •• Do not push on the disc compartment or put any objects other than discs on the disc compartment. It may cause the disc player to malfunction.
Display play information 1 1 2 During play, press CLOCK/DISPLAY repeatedly to select different play information. During play, press REP ALL repeatedly to select: »» [REP ONE]: The current track is played repeatedly. 2 Compatible iPod/iPhone To return to normal play, press REP ALL repeatedly until repeat mode is no longer displayed. Apple iPod and iPhone models with a 30-pin dock connector.
Listen to iPod/iPhone through this player 1 Place the iPod/iPhone in the dock. »» The unit switches to iPod/iPhone mode automatically. • • • To start/pause/resume play, press . To skip to a track, press / . To search during play: press and hold / , then release to resume normal play. To navigate the menu: press MENU, then press / to select, and press OK to confirm. • Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone starts charging.
8 Listen to radio Tune to a radio station 1 2 3 Press TUN to select FM. Press and hold / for more than 2 seconds. »» [SEARCH] is displayed. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations automatically Program radio stations manually You can program a maximum of 20 preset radio stations.
9 Other features Set the sleep timer Set the alarm timer This unit can switch to standby automatically after a set of time. 1 Note •• This player can set the Disc, Tuner, or iPod/iPhone as the source for the alarm timer. 1 2 3 4 5 6 7 8 When the unit is on, press SLEEP repeatedly to select a set of time (in minutes). »» When sleep timer is activated, the display shows . To deactivate sleep timer Make sure that you have set the clock correctly. 1 In standby mode, press and hold TIMER.
10 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input 15W RMS 60 - 16kHz, ±3dB >65dBA 0.5 V RMS 20kohm Speakers Speaker Impedance Speaker Driver Sensitivity 4ohm 3.
11 Troubleshooting Caution •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Philips Electronics Australia Limited and Philips New Zealand Limited Warranty against Defects In this warranty: We or us means Philips Electronics Australia Limited ACN 008 445 743 or Philips New Zealand Limited (Company Number 1723), and our contact details are set out at the end of this warranty; You means the purchaser or the original end-user of the Goods; Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in Australia or New Zealand; and Goods means the product
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. DCM186B_79_UM_V1.1 DCM186B_79_UM_V1.0.